31.220.10 插头和插座装置、连接器 标准查询与下载

GSO IEC 60512-15-2:2024 电气和电子设备连接器 测试和测量 第15-2部分：连接器测试（机械） 测试 15b：插入件在外壳中的保持力（轴向）

IEC 60512-15-2:2018 This part of IEC 60512, when required by the detail (product) specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail (product) specification. The object of this document is to detail a standard test method to assess the effectiveness of the retaining system of a connector insert within a connector housing to withstand axial forces likely to be encountered during normal use, i.e. the highest insertion and withdrawal forces into/from a mating counterpart, without the connector insert being dislodged from the connector housing. The test method detailed in this document is a companion to the one detailed in IEC 60512-15-3 This second edition cancels and replaces the first edition, published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: the test method B (pressure method) suitable for testing hermetic connector has been added. This edition reflects IEC 60512-1-101, Blank detail specification.

Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)

GSO IEC 60512-27-200:2024 电气和电子设备连接器 测试和测量 第27-200部分：IEC 60603-7 系列连接器上高达 2 000 MHz 信号完整性测试的附加规范 测试 27a 至 27g

IEC 60512-27-200:2022 is primarily intended for use in signal integrity and transmission performance testing up to 2 000 MHz of IEC 60603-7 series 8-way connector type IEC 60603‑7‑81, according to connector test method IEC 60512‑28‑100. This part of IEC 60512 covers additional, supplemental test method specifications to extend the upper frequency for the test connectors and associated indirect-reference test fixtures used in the signal integrity and transmission performance tests specified in IEC 60512‑27‑100. In support of de-embedded crosstalk and related transmission requirements specified in IEC 60603‑7‑81, for frequencies up to 2 000 MHz, these supplemental specifications extend the upper test frequency from IEC 60512‑27‑100 up to 500 MHz to the upper test frequency of IEC 60512‑28‑100 up to 2 000 MHz. This document covers measurements of connector signal integrity and transmission performance of 8-way connector types defined in these published connector series standards: - IEC 60603‑7‑2 - IEC 60603‑7‑3 - IEC 60603‑7‑4 - IEC 60603‑7‑5 - IEC 60603‑7‑41 - IEC 60603‑7‑51 - IEC 60603‑7‑81. This document covers respective performance test procedures of connector signal integrity and transmission performance defined in these published connector test method series standards: - IEC 60512‑26‑100 - IEC 60512‑27‑100 - IEC 60512‑28‑100. This first edition cancels and replaces IEC/PAS 60512-27-200, published in 2018.

Connectors for electrical and electronic equipment - Tests and measurements - Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors - Tests 27a to 27g

T/CNSZCIA 001-2024 汽车摄像头模组SMB连接器

本标准规定了汽车摄像头模组SMB连接器的术语和定义、插合界面尺寸、标准规检测要求、产品的额定值和特性以及从用于汽车摄像头模组SMB连接器的所有相关详细规范的试验一览表和检验要求。 本标准提供了汽车摄像头模组SMB连接器的推荐性能特性。 本标准适用于汽车摄像头模组SMB连接器，它具有50Ω特性阻抗，用于卡锁连接的微波应用场合， 配接同轴射频电缆，这种连接器使用频率DC到6GHz。

SMB connector for car camera module

T/CECA 96-2023 牛角锁扣式系列连接器

本文件规定了牛角锁扣式系列连接器的技术要求、质量保证规定和交付准备等。 本文件适用于牛角锁扣式系列连接器（以下简称连接器）的设计、制造和验收。

Ejector With Lock Series Connector

T/CECA 94-2023 2.00mm间距SIC高性能串行连接器

本文件规定了2.00mm SIC(Signal Interface Connector)高性能串行连接器的技术要求、质量保证规定和交付准备等。 本文件适用于2.00mm SIC高性能串行连接器（以下简称连接器）的设计、制造和验收。

2.00mm Pitch SIC High-Performance serial Connector

T/CECA 95-2023 1.27mm间距小型计算机系统接口连接器

本文件规定了1.27mm间距微型计算机系统连接器的技术要求、质量保证规定和交付准备等。 本文件适用于1.27mm间距微型计算机系统连接器(以下简称连接器)的设计、制造和验收。

1.27mm pitch Small Computer System Interface Connector

23/30481766 DC BS EN IEC 61076-8-112 电气和电子设备连接器 产品要求 第8-112部分：电源连接器 额定电流的带塑料外壳的 2 极卡扣锁定防水矩形连接器的详细规范 .

BS EN IEC 61076-8-112 Connectors for electrical and electronic equipment - Product requirements - Part 8-112: Power connectors Detail specification for 2-pole snap locking waterproof rectangular connectors with plastic housing for rated current…

T/CNSZCIA 002-2023 汽车辅助驾驶高速连接器

本标准规定了汽车辅助驾驶高速连接器的术语和定义、技术要求、试验方法、检验规则、标识、包装、运输和贮存。 本标准适用于汽车辅助驾驶高速连接器（以下简称连接器）的技术参考。

Automobile assisted driving high-speed connector

T/CNSZCIA 001-2023 56Gbps AI服务器高速背板连接器

本标准规定了56Gbps AI服务器高速背板连接器的术语和定义、产品分类、要求、试验方法、检验规则、标识、包装、运输和贮存。 本标准适用于通讯设备的56Gbps AI服务器高速背板连接器。

56Gbps AI server high-speed backplane connector

BS EN IEC 61076-3-106:2023 电气和电子设备连接器 产品要求 矩形连接器 用于工业环境的 8 路屏蔽和非屏蔽连接器的保护外壳的详细规范，包括

Connectors for electrical and electronic equipment. Product requirements - Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the…

T/CECA 89-2023 石油装备用HTP系列耐高温高承压电连接器

本文件规定了石油装备用HTP系列耐高温高承压电连接器（以下简称连接器）的技术要求、试验方法和交付准备等。 本文件适用于石油装备中安装于设备壳体上连通设备内外的耐高温（温度175 ℃、200 ℃、230 ℃）、具有玻璃烧结结构的高承压（液体压力140 MPa、175 MPa、200 MPa）电连接器及其耐高温非承压类适配插头的设计、制造和验收。

HTP series electrical connectors of withstanding high temperature and high pressure for petroleum equipment

IEC 63171-1:2023 PRV

IEC 61076-8-105:2023 电气和电子设备用连接器.产品要求.第8-105部分:电源连接器.63A额定电流和400V额定电压用带塑料外壳的双极快锁矩形电源连接器的详细规范

Connectors for electrical and electronic equipment - Product requirements - Part 8-105: Power connectors – Detail specification for 2-pole snap locking rectangular power connectors with plastic housin

23/30476719 DC BS EN IEC 63171 电气和电子设备连接器 屏蔽或非屏蔽自由和固定连接器 用于具有载流能力的平衡单对数据传输 一般要求和测试

BS EN IEC 63171. Connectors for electrical and electronic equipment. Shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current-carrying capacity. General requirements and tests

T/SZECDC 003-2023 电连接器片簧插孔工艺规范

本文件规定了电连接器用片簧插孔的工艺规范，包括加工、装配的要求，质量保证规定和交货准备。 本文件适用于电连接器接触件零件的生产、试验和验收。

Technical specification for leaf spring socket of electrical connector

BS IEC 61076-8-107:2023 电气和电子设备连接器 产品要求 电源连接器 2P 200 A、1 000 V 加 2P 5 A 50 V 矩形外壳屏蔽连接器的详细规范 在插配时具有 IP65/IP68 防护等级……

Connectors for electrical and electronic equipment. Product requirements - Power connectors. Detail specification for 2P 200 A, 1 000 V plus 2P 5 A 50 V rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and…

EN IEC 61076-2-115:2023 电气和电子设备连接器 产品要求 第2-115部分：圆形连接器 具有 2 A 额定电流和具有推拉锁定功能的 IP65/IP67 金属外壳的 12 针屏蔽连接器的详细规范

IEC 61076-2-115:2023 describes free and fixed 12P shielded circular connectors with 2 A rated current, rated voltage up to and including 50 V AC/DC, IP65/IP67 metal housing with push-pull locking (hereinafter referred to as a connectors) for use in electrical and electronic equipment. It includes overall dimensions, interface dimensions, technical characteristics, performance requirements and test methods.

Connectors for electrical and electronic equipment - Product requirements - Part 2-115: Circular connectors - Detail specification for 12-pole shielded connectors with 2 A rated current and IP65/IP67 metal housing with push-pull locking

BS IEC 61076-8-109:2023 电气和电子设备连接器 产品要求 电源连接器 2P 130 A、1 000 V 加 2P 5 A 50 V 矩形外壳屏蔽连接器的详细规范 在插配时具有 IP65/IP68 防护等级……

Connectors for electrical and electronic equipment. Product requirements - Power connectors. Detail specification for 2P 130 A, 1 000 V plus 2P 5 A 50 V rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and…

T/QGCML 937-2023 连接器通用技术规范

本标准规定了连接器通用技术规范的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于连接器的生产及检验。

General Technical Specifications for Connectors

T/SZECDC 002-2023 汽车用高频高速连接器通用技术要求

本文件规定了汽车用高频高速连接器的术语和定义、技术要求、试验方法和试验要求、检验规则、标志、包装、运输及贮存。 本文件适用于汽车用高频高速连接器。

General technical requirements for high-frequency and high-speed connectors for automobiles