47.020.01 造船和海上构筑物通用标准 标准查询与下载

T/CHIDA 02-2023 绞吸挖泥船智能疏浚监控系统技术要求

本文件规定了绞吸挖泥船智能疏浚监控系统的组成与结构、要求。 本文件适用于绞吸挖泥船智能疏浚监控系统的设计与制造，维护和改造可参照使用

Technical requirements for cutter suction dredger intelligent dredging supervisory and control system

BS ISO 5476:2023 船舶和海洋技术 用于救生设备和布置的虚拟现实和模拟器培训设备和系统

1   Scope This document provides general provisions and minimum criteria for using virtual reality and simulator equipment and systems instead of live training and drills with lifesaving appliances and arrangements, such as those required by SOLAS and MODU Code. This document is not intended to provide a generic training programme for the purposes of meeting International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW) requirements. This document serves to support the use of training devices ( TD ) onboard vessels that can deliver training and drills required by regulation, as well as additional non-obligatory training to crew. It is understood that training devices described in this document are used as an alternative to actual participation with and operations of lifesaving appliances (LSA) products during drills to meet mandatory training requirements.

Ships and Marine Technology. Virtual reality and simulator training equipment and systems for lifesaving appliances and arrangements

23/30393738 DC BS ISO 23799 船舶和海洋技术 机载网络安全评估

BS ISO 23799. Ships and marine technology. Assessment of onboard cyber safety

T/CHIDA 01-2023 耙吸挖泥船智能疏浚监控系统技术要求

本文件规定了耙吸挖泥船智能疏浚监控系统的组成与结构、要求。 本文件适用于耙吸挖泥船智能疏浚监控系统的设计与制造，维护和改造可参照使用。

Technical requirements for trailing suction hopper dredger intelligent dredging supervisory and control system

ISO 5476:2023 船舶和海洋技术.救生设备和装置的虚拟现实和模拟训练系统

This document provides general provisions and minimum criteria for using virtual reality and simulator equipment and systems instead of live training and drills with lifesaving appliances and arrangements, such as those required byISOLAS and MODU Code. This document is not intended to provide a generic training programme for the purposes of meeting International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW) requirements. This document serves to support the use of training devices (TD) onboard vessels that can deliver training and drills required by regulation, as well as additional non-obligatory training to crew. It is understood that training devices described in this document are used as an alternative to actual participation with and operations of lifesaving appliances (LSA) products during drills to meet mandatory training requirements.

Ships and marine technology — Virtual reality and simulation training systems for lifesaving appliances and arrangements

ASTM F1166-23 海洋系统、设备和设施的人类工程设计标准实施规程

1.1 This practice provides ergonomic design criteria from a human-machine perspective for the design and construction of maritime vessels and structures and for equipment, systems, and subsystems contained therein, including vendor-purchased hardware and software. 1.1.1 The focus of these design criteria is on the design and evaluation of human-machine interfaces, including the interfaces between humans on the one side and controls and displays, physical environments, structures, consoles, panels and workstations, layout and arrangement of ship spaces, maintenance workplaces, labels and signage, alarms, computer screens, material handling, valves, and other specific equipment on the other. 1.2 The criteria contained within this practice shall be applied to the design and construction of all hardware and software within a ship or maritime structure that the human crew members come in contact in any manner for operation, habitability, and maintenance purposes. 1.3 Unless otherwise stated in specific provisions of a ship or maritime structure design contract or specification, this practice is to be used to design maritime vessels, structures, equipment, systems, and subsystems to fit the full potential user population range of 5th % females to 95th % males. 1.4 This practice is divided into the following sections and subsections: TABLE OF CONTENTS Section and Subsections Title 2 Referenced Documents TABLE OF CONTENTS Section and Subsections Title 3 Terminology 4 Significance and Use 5 Controls 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities

ASTM F3256-23 海事工业未遂事故报告和记录的标准指南

1.1 This guide provides near-miss reporting criteria and terminology for maritime vessels. 1.2 The purpose of this near-miss reporting guide is to standardize near-miss reporting, including terminology, for the maritime industry. 1.3 The criteria contained within this guide should be applied as a minimum to all near-miss reporting in the maritime industry unless otherwise specified. 1.4 This guide is divided into the following sections and appendixes: Table of Contents Sections and Subsections Title 2 Terminology 3 Significance and Use 4 Near-Miss Standardization 5 Procedure 6 Keywords Appendix X1 Probability, Severity, and Risk Assessment Appendix X2 Sample Near-Miss Reporting Form 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Reporting and Recording of Near-Misses for Maritime Industry

T/NSSQ 016-2022 半潜船载货区域结构设计方法

本文件规定了半潜船载货区域结构的设计依据、设计内容和设计方法。

Design methods for cargo area structure of semi-submerged ship

T/NSSQ 015-2022 半潜船集中报警控制监测系统设计要求

本文件规定了半潜船集中报警控制监测系统的设计依据、设计原则、总体设计要求、详细设计要求、设计验证。

Requirements for integrated alarm control and monitoring system design of semi-submerged ship

ISO 17631:2022 船舶和海上技术.火灾控制、损害控制、救生装置和逃生装置的船上平面图

Ships and marine technology — Shipboard plans for fire control, damage control, life-saving appliances and means of escape

BS ISO 23806:2022 船舶和海洋技术 网络安全

1   Scope This document gives requirements and recommendations for establishing, implementing, maintaining and continually improving a cyber risk assessment system within the context of a company ’s security management system ( SMS ). All the elements for compliance with this document can therefore be traceable within the SMS by direct inclusion or reference.

Ships and marine technology. Cyber safety

ISO 23806:2022 船舶和海洋技术.网络安全

This document gives requirements and recommendations for establishing, implementing, maintaining and continually improving a cyber risk assessment system within the context of a company’s security management system (SMS). All the elements for compliance with this document can therefore be traceable within the SMS by direct inclusion or reference.

Ships and marine technology — Cyber safety

T/CSCP T/CSCP0007-2022 沉管隧道钢壳外表面防腐蚀技术规范

国内沉管以混凝土结构为主，深中通道沉管隧道外壳全钢结构为国内沉管隧道第一例，沉管钢壳的防腐国内无相关研究经验。防腐蚀标准只能借鉴海港工程或海底采油装置防腐技术相关标准。包括：《海港工程钢结构防腐技术规范》（JTS 153-3-2007）、《galvanic anode CP in seawater and saline mud》（BS EN 12496-2013）、《Cathodic Protection of Harbor Installation》（ISO 13174-2012）、《General principles of cathodic protection in seawater》（ISO 12473-2017）、《Cathodic Protection Design》（DNVGL-RP-B401-2017）。 本标准针对沉管钢壳结构埋覆环境介质的特殊性，主要规定了沉管钢壳外表面的涂层和阴极保护要求，明确和细化了防腐蚀材料的制造、安装、检验规定，对防腐蚀的全生命周期耐久性监测、评估及管理作出了规定。 本标准适用于全浸在海水或埋设在海底泥、抛石层下的海底金属构筑物，例如钢壳沉管隧道外壳、海底采油树、管汇以及输水管线等结构的防腐蚀要求。 工程钢结构的防腐蚀设计和施工的安全、劳动保护及环境保护等，除执行本规范的规定外，还应符合国家现行的有关标准、规范。

Technical Specification for Anti-Corrosion of The Outside Steel Shell Surface at Immersed Tube Tunnel

DB3309/T 91-2022 海洋无人水面艇航速试验方法

Velocity test method for marine unmanned surface craft

KS V ISO 24408-2022 救生设备示位灯 生产单位的试验、检验和标志

Position-indicating lights for life-saving appliances－Testing, inspection and marking of production units

KS V ISO 30003-2022 船舶和海洋技术 船舶回收管理体系 对船舶回收管理审核和认证机构的要求

Ships and marine technology－Ship recycling management systems－Requirements for bodies providing audit and certification of ship recycling management

KS V 8822-2022 造船-端子板

Shipbuilding-Terminal boards

KS V ISO 24409-1-2022 船舶安全标志、安全相关标志、安全提示和安全标志的设计、位置和使用第1部分：设计原则

Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings－Part 1：Design principles

KS V ISO 30007-2022 船舶回收过程中防止石棉排放和暴露的措施

Measures to prevent asbestos emission and exposure during ship recycling

KS V ISO 30006-2022 船舶回收管理系统 显示船上有害物质位置的图表

Ship recycling management systems－Diagrams to show the location of hazardous materials onboard ships