共找到 252 条与 软管 相关的标准,共 17 页
この規格は,圧力3.3 kPa以下の都市ガス () のガス栓と燃焼機器との間,並びに液化石油ガス () (以下,LPガスという。)の調整器,ガス栓及び燃焼機器との間を連結するガス用ゴム管(以下,ゴム管という。)について規定する。
Rubber tubes for gas
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil
TRANSMITTER, PRESSURE, SYNCHRO, AIRCRAFT 320 DEGREE MOVEMENT, HIGH TEMPERATURE (177 DEG C) GENERAL PURPOSE
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.
HARNESS, AIRCRAFT SAFETY, PILOT'S SHOULDER Y TYPE
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.
HARNESS, AIRCRAFT SAFETY, PILOT'S SHOULDER V TYPE
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.
COMPUTER, AIRCRAFT LOAD BALANCING
Rubber tubing and hoses for fuel circuits for internal-combustion engines-Specification-Part 3:Oxidized fuels
Rubber tubing and hoses for fuel circuits for internal-combustion engines-Specification-Part 3:Oxidized fuels
この規格は,揮発油,灯油,マシン油などの鉱物性油類の常温における一般的な輸送用に使用する送油用ゴムホース(以下,ホースという。)について規定する。ただし,他の日本工業規格(例えば JIS 3022)で規定するものには適用しない。
Rubber hoses for oil discharge
MIL-I-6726B remains inactive for new design, however, the document is valid for use.
INCLINOMETER, AIRCRAFT
MIL-F-6836A remains inactive for new design, however, the document is valid for use.
FLANGE, MOUNTING, ATTACHABLE, AIRCRAFT INSTRUMENT (ASG)
Textile reinforced rubber hose assemblies for hydraulic use
This amendment forms a part of MIL-PRF-49450B(CR), dated 10 March 2000, and is approved for use by he Communications and Electronics Command, Department of the Army and is available for use by all Department and Agencies of the Department of Defense.
BATTERY, RECHARGEABLE, NICKEL-CADMIUM, VENTED, AIRCRAFT
1.1 This specification covers flexible, pre-insulated piping commonly used to convey hot and cold fluids. 1.2 This specification establishes materials and performance requirements for flexible, pre-insulated piping intended for hot and chilled water applications. 1.3 Piping systems may include one or more carrier pipes within a common outer jacket. 1.4 The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered part of this standard. 1.5 Units8212;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The following safety hazards caveat pertains to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
Standard Specification for Flexible Pre-Insulated Piping
本标准规定了用于燃油循环系统的纯胶管和橡胶软管的要求。在该系统中燃油能被氧化或"酸化"。 这些燃油可能含有,也可能不含如乙醇那样的化合物。本标准不包括用于液体燃油配给装备,也不适用于完全浸泡在燃油箱中的纯胶管。 这些软管和纯胶管用于重复循环燃油的注入系统及充油后还可能在高的环境温度下进行特殊存放的其他系统。这样的软管和纯胶管一般具有特种弹性体材料制作的内镶衬层
Rubber tubing and hoses for fuel circuits for internal-Combustion engines using oxidized fuels
この規格は,鉱物性作動油又は水成分系作動油()を用いる液圧装置及び液圧回路に使用するホースアセンブリの継手金具(以下,継手という。)及び附属金具について規定する。
End fittings and adapters for hydraulic hose assemblies
この規格は,鉱物性作動油又は水成系作動油()を用いる液圧装置及び液圧回路に-40~+100℃のまで温度範囲で使用する鋼線補強ゴムホースアセンブリ(以下,ホースアセンブリという。)について規定する。ただし,薬物性流体及びエステル系作動油を除く。
Wire reinforced rubber hose assemblies for hydraulic use
この規格は,最高使用圧力6.9 MPa~34.5 MPaで使用される2種類のタィプの繊維補強樹脂ホースアセンブリ(以下,ホースアセンブリという。)について規定する。ホースアセンブリは,-40~+100℃までの温度範囲内で,鉱物性作動油,水及び合成系作動油の使用に適したものとする。
Textile reinforced thermoplastic hose assemblies for hydraulic use
この規格は,-40~+100℃の温度範囲において,鉱物性作動油及び水成系作動油()に使用する呼び径5~51までの4種頻の繊維補強ゴムホースアセンブリ(以下,ホースアセンブリという。)の性能について規定する。
Textile reinforced rubber hose assemblies for hydraulic use
This specification covers the requirements for BB-7 16/A, BB-432B/A, BB- 476/A, BB-649NA and BB-664/A vented, rechargeable nickel cadmium aircraft batteries and cells and harnesses used therein .
BATTERY, RECHARGEABLE, NICKEL-CADMIUM, VENTED, AIRCRAFT
Wire reinforced rubber hoses for gaseous fuels
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号