83.140.40 软管 标准查询与下载

LST EN ISO 3949:2020 塑料软管和软管组件 用于液压应用的织物增强型 规范（ISO 3949:2020，更正版本 2020-12）

Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2020, Corrected version 2020-12)

T/QGCML 066-2020 高压清洗橡胶软管

本标准规定了高压清洗橡胶软管的术语定义、结构、材料、尺寸、产品要求、试验方法、检验规则、标志、包装、贮藏和运输等内容。 本标准适应于高压清洗设备机械上用于输送冷水、热水的橡胶软管。

High pressure cleaning rubber hose

T/QGCML 067-2020 煤矿用喷浆橡胶软管

本标准规定了煤矿用喷浆橡胶软管的术语定义、结构、材料、技术、物理性能、产品包装、运输和贮藏等内容 本标准适应于生产煤矿用喷浆橡胶软管的企业。

Shotcrete rubber hose for coal mine

ISO 8066-3:2020 汽车空调用橡胶和塑料软管及软管组件规范第3部分:制冷剂1234yf

This document specifies the requirements for rubber or thermoplastic hoses and hose assemblies used for circulating liquid and gaseous R1234yf (tetrafluoropropene) in the air-conditioning systems of automobiles. The hoses and hose assemblies are designed in such a way as to restrict losses of refrigerant and contamination of the system. The operational temperature range is −40 °C to +125 °C. Due to the critical relationship between the hose and coupling for this application, a requirement that the coupling to be used in service be used for testing has been laid down.

Rubber and plastics hoses and hose assemblies for automotive air conditioning — Specification — Part 3: Refrigerant 1234yf

ISO 3949:2020 塑料软管和软管组件 - 用于液压应用的纺织增强型 - 规格

This document specifies requirements for three types of textile-reinforced thermoplastics hoses and hose assemblies of nominal size from 3,2 to 25. Each type is divided into two classes dependent on electrical conductivity requirements. They are suitable for use with: — oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +93 °C; — water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from 0 °C to +60 °C — water at temperatures ranging from 0 °C to +60 °C. This document does not include any requirements for end fittings. It is limited to the performance of hoses and hose assemblies. NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used.

Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification

ISO 4079:2020 橡胶软管和软管组件 - 用于油基或水基流体的纺织增强液压类型 - 规格

This document specifies requirements for five types of textile-reinforced hydraulic hoses and hose assemblies of nominal size from 5 to 100. They are suitable for use with: — oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C; — water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from −40 °C to +70 °C; — water at temperatures ranging from 0 °C to +70 °C. This document does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies. NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used.

Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification

ISO 1436:2020 橡胶软管和软管组件.油基或水基液体用钢丝编织增强液压型.规范

This document specifies requirements for six types of wire-braid-reinforced hoses and hose assemblies of nominal size from 5 to 51. This document also specifies the hose of nominal size 63 for types 2SN and R2AT, and the hose of nominal size 76 for type 2SN. They are suitable for use with: — oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C; — water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from −40 °C to +70 °C; — water at temperatures ranging from 0 °C to +70 °C. This document does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies. NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used.

Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification

ISO 7313:2020 飞机.聚四氟乙烯（PTFE）高温卷绕软管组件

Aircraft — High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)

ISO 3862:2020 橡胶软管和软管组件.油基或水基液体用橡胶覆盖螺旋钢丝增强液压型.规范

This document specifies requirements for five types of spiral-wire-reinforced hydraulic hoses and hose assemblies of nominal size from 6,3 to 51. They are suitable for use with: — oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C for types 4SP and 4SH hoses and from −40 °C to +120 °C for types R12, R13 and R15 hoses; — water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from −40 °C to +70 °C; — water at temperatures ranging from 0 °C to +70 °C. This document does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies. NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used.

Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification

KS D 3625-2020 气体用金属软管

Metallic flexible hoses for gas

ISO 8789:2020 汽车液化石油气橡胶软管组件 - 规格

This document specifies the requirements for rubber hoses and hose assemblies, up to a maximum hose size of 19, for use in motor vehicles with liquefied petroleum gas (LPG) installations. The hoses are designed for use up to a maximum working pressure of 3,0 MPa (30 bar) and at working temperatures from −40 °C up to and including +80 °C.

Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles — Specification

T/CRIA 16009-2019 汽车用冷却水管

1.范围 2.规范性引用文件 3.术语和定义 4.结构、 5基本要求、 6技术要求、 7试验方法、 8检验规则、 9标志、包装、运输和贮存 10质量承诺

Cooling water pipe for automobile

ISO 3821:2019 燃气焊接设备 - 焊接 切割及相关工艺用橡胶软管

This document specifies requirements for rubber hoses (including twin hoses) for welding, cutting and allied processes. This document specifies requirements for rubber hoses for normal duty of 2 MPa (20 bar) and light duty [limited to hoses for maximum working pressure of 1 MPa (10 bar) and with bore up to and including 6,3 mm]. This document applies to hoses operated at temperatures −20 °C to +60 °C and used in: — gas welding and cutting; — arc welding under the protection of an inert or active gas; — processes allied to welding and cutting, in particular, heating, brazing, and metallization. This document does not specify requirements for hose assemblies; these are detailed in ISO 8207. This document applies neither to thermoplastics hoses nor to hoses used for high pressure [>0,15 MPa (>1,5 bar)] acetylene.

Gas welding equipment — Rubber hoses for welding, cutting and allied processes

ISO 19013-1:2019 用于内燃机燃油电路的橡胶软管和管件 - 规范 - 第1部分:柴油

This document specifies the requirements for rubber tubing and hoses used in diesel fuel circuits for internal combustion engines. The diesel fuels covered include “bio-diesels” which consist of the methyl ester of rape seed oil at levels up to 20 % by volume in conventional diesel fuels. This document can also be applied as a classification system to enable original equipment manufacturers (OEMs) to detail a “line call-out” of tests for specific applications where these are not covered by the main types specified (see example in Annex E). In this case, the hose or tubing would not carry any marking showing the number of this document but can detail the OEM's own identification markings as shown on their part drawings.

Rubber hoses and tubing for fuel circuits for internal combustion engines — Specification — Part 1: Diesel fuels

JIS B 8262:2019 液化石油气用带安装支架的高压橡胶软管和低压橡胶软管

High-pressure rubber hoses and low-pressure rubber hoses with fitting bracket for liquefied petroleum gas

ISO 16964:2019 气瓶 - 柔性软管组件 - 规格和测试

This document provides specification and testing requirements for high pressure flexible hose assemblies intended to be connected to gas cylinders, bundles of cylinders or trailers (battery vehicles), and MEGCs for use when filling and emptying gas at production sites and also for customer use. This document applies to flexible hose assemblies with rated pressures up to 1000 bar for use in the temperature range of −40 °C to +65 °C. This document is not applicable to: — rubber and plastics flexible hose assemblies for welding, cutting and related processes up to 45 MPa (450 bar) for customer use (see ISO 14113); — high pressure flexible hose assemblies for use with medical gas systems for customer use (see — low pressure hose assemblies for use with medical gases for customer use (see ISO 5359); — rubber and thermoplastic low pressure hose assemblies for welding, cutting and related processes for customer use (see ISO 3821 or ISO 12170); — flexible hose assemblies for cryogenic applications (see ISO 21012); — flexible hose assemblies for liquid petroleum gas (LPG). NOTE Flexible hose assembly designs which pass the type test approval described in this document can have a lower ratio of burst pressure to rated pressure than stated in other standards.

Gas cylinders — Flexible hoses assemblies — Specification and testing

EN ISO 3949:2018 织物增强液压型塑料软管和软管组合件.规范

Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification

ISO 28017:2018 疏浚用金属或织物增强橡胶软管和软管总成规范

This document specifies requirements for two types, seven classes and three grades of wire- or textilereinforced dredging hoses with nominal sizes ranging from 100 to 1200. Within each class, all grades and sizes have the same maximum working pressure. Such hoses are suitable for the delivery or suction of seawater or freshwater mixed with silt, sand, coral and small stones with a specific gravity in the range from 1,0 to 2,3 at ambient temperatures ranging from −10 °C to +40 °C. This document covers two types of hose, as follows: — type 1: floating type, for delivery only, which includes flotation material to give the hose buoyancy; — type 2: submarine type for delivery and suction. This document does not specify requirements concerning the service life of hoses or hose assemblies. Specifying such requirements is the responsibility of the customer, in consultation with the hose manufacturer.

Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification

KS M ISO 28017-2017 橡胶软管和软管组件 钢丝或纺织钢筋 用于疏浚应用 - 规格

Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification

KS M ISO 28017:2017 橡皮管与水管组件、疏浚用途的电线或织物增强产品 要求事项

Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification