83.140.40 软管 标准查询与下载

ISO 23297:2017 热塑性软管和软管组件.液压应用的钢丝或合成纱增强单压型.规范

This document specifies requirements for eight classes and two types (construction with adhesive bond between layers and construction without adhesive bond between layers) of wire or synthetic yarn reinforced hydraulic hoses and hose assemblies of nominal size from 3,2 to 31,5. Each class has a single maximum working pressure for all sizes. Such hoses are suitable for use with hydraulic fluids HH, HL, HM, HR, and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C for grades A and B and −40 °C to +120 °C for grades C and D. This document does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies. The hose assembly maximum working pressure is governed by the lowest maximum working pressure of the components. NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish compatibility of the hose with the fluid to be used.

Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification

JIS K 6348:2017 气体用橡胶管

Rubber tubes for gas

JIS K 6351:2017 气体用金属线增强橡胶软管和软管配件

Wire reinforced rubber hoses and hose assemblies for gas

BS ISO 16301:2017 用于手动操作液压千斤顶的橡胶和塑料软管和软管组件 钢丝或织物增强 规格

1   Scope This document specifies the requirements for three classes of wire- or textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 25. The hoses and hose assemblies are used in hydraulic jack applications with manually operated hand pumps. They are suitable for use with hydraulic fluids HH, HL, HM, HR and HV at temperature ranging from −40 °C to +55 °C. For tools that require heavy duty services such as a rescue tool, ISO 19718 [ 3 ] applies. This document does not include requirements for the connection ends. It is limited to the performance of hoses and hose assemblies. The maximum working pressure of hose assemblies is regulated by the lowest maximum working pressure of the components. NOTE 1 It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used. NOTE 2 There are two International Standards for hoses for hydraulic jacks and tool applications, i.e. ISO 16301 and ISO 19718. The comparison table is given in Annex A. NOTE 3 The classification of HH, HL, HM, HR and HV is found in ISO 6743‑4 [ 2 ] .

Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks. Specification

GSO ISO 13363:2017 船用发动机湿式排气系统用橡胶和塑料软管 规范

This International Standard specifies requirements for three types and two classes of hose. The hoses are intended for use in marine-engine wet-exhaust systems (where the exhaust gases are mixed with the discharge of cooling water). It does not apply to outboard motor/personal water craft. The three types are the following: — type 1: a softwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement; — type 2: a hardwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement with a helical wire embedded in it; — type 3: a hose or tube (flexible connector), made of oil-resistant material, with or without a reinforcement or cover, intended for use in short lengths in locations where the connector is protected from mechanical damage. The two classes are the following: — class A: intended for diesel engines; — class B: intended for petrol engines and for diesel engines with a very high exhaust temperature.

Rubber and plastics hoses for marine-engine wet-exhaust systems – Specification

ISO 16301:2017 手动液压千斤顶用钢丝或纺织增强橡胶和塑料软管和软管组件规范

This document specifies the requirements for three classes of wire- or textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 25. The hoses and hose assemblies are used in hydraulic jack applications with manually operated hand pumps. They are suitable for use with hydraulic fluids HH, HL, HM, HR and HV at temperature ranging from −40 °C to +55 °C. For tools that require heavy duty services such as a rescue tool, ISO 19718[3] applies. This document does not include requirements for the connection ends. It is limited to the performance of hoses and hose assemblies. The maximum working pressure of hose assemblies is regulated by the lowest maximum working pressure of the components. NOTE 1 It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used. NOTE 2 There are two International Standards for hoses for hydraulic jacks and tool applications, i.e. NOTE 3 The classification of HH, HL, HM, HR and HV is found in ISO 6743-4[2].

Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks - Specification

ISO 4079:2017 橡胶软管和软管组件 - 用于油基或水基流体的纺织增强液压类型 - 规格

Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification

EN ISO 6806:2017 油燃烧器用软管和软管组件.规范

Rubber hoses and hose assemblies for use in oil burners - Specification

GOST 10362-2017 无端配件带螺纹钢筋的压力橡胶软管. 规格

Pressure rubber hoses with thread reinforcement without end fittings. Specifications

GOST 25452-2017 无端配件带螺纹钢筋网的高压橡胶软管. 规格

High-pressure rubber hoses with spiral wire reinforcement without end fittings. Specifications

GOST 6286-2017 无端配件带金属编织的高压橡胶软管. 规格

High-pressure rubber hoses with metal braids without end fittings. Specifications

GSO ISO 27126:2016 用于传输碳氢化合物、溶剂和化学品的热塑性多层（非硫化）软管和软管组件 规范

This International Standard specifies requirements for four types of thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for carrying hydrocarbons, solvents and chemicals. It specifies bore sizes from 25 mm to 300 mm, working pressures from 0,4 MPa (4 bar) to 1,4 MPa (14 bar) and working temperatures from –30 °C to 150 °C, according to type. Type 1 hoses are suitable for vapour applications. Types 2 to 4 hoses are suitable for liquid applications. NOTE 1 See Annex A concerning the selection of the material for the inner wall of layers and any polymeric coating of the internal wire helix related to the chemical(s) to be conveyed by the hoses and/or hose assemblies. NOTE 2 It is intended that the manufacturer be consulted where a polymeric coated internal wire is being considered for use with low conductivity hydrocarbons or chemicals. This International Standard does not apply to hoses and hose assemblies for: — aircraft refuelling see (ISO 1825); — fuel dispensing see (ISO 5772); — oil burners see (ISO 6806); — liquefied petroleum gas and liquefied natural gas see (ISO 27127); — fire fighting see (ISO 14557); — offshore liquefied natural gas see (EN 1474–2); — refrigeration circuits.

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals -- Specification

KS M 6702-2016 气体输送用橡胶管

Rubber tubings for gas transfer application

KS M 6702-2016(2021) 气体输送用橡胶管

Rubber tubings for gas transfer application

ISO 6804:2016 用于洗衣机和洗碗机的橡胶和塑料入口软管和软管组件 - 规格

This document specifies the requirements for three types of rubber or plastics inlet hoses and hose assemblies for washing-machines and dishwashers connected to the domestic water supply at a pressure not exceeding 1 MPa (10 bar). It is applicable to the following types of hose: — type 1: rubber hoses for unheated water supply (maximum temperature 70 °C); — type 2: rubber hoses for heated water supply (maximum temperature 90 °C); — type 3: plastics hoses for unheated water supply (maximum temperature 60 °C). There may be national requirements for hose fittings and hoses conveying drinking water which must be complied with.

Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification

ISO 4081:2016 内燃机冷却系统橡胶软管和管件 - 规格

This International Standard specifies the requirements for straight or pre-formed rubber hoses and tubing for use in pressurized or unpressurized cooling circuits containing 1,2-ethanediol-based coolants in internal-combustion engines for vehicles with an unladen mass (as defined in ISO 1176) of 3,5 t or less. In addition, this specification may also be applied as a classification system to enable original equipment manufacturers (OEMs) to detail a “line call-out” of tests for specific applications where these are not covered by the main types specified (see example in Annex D). In this case, the hose or tubing would not carry any marking showing this ISO specification number but may detail the OEM’s own identification markings as shown on their part drawings.

Rubber hoses and tubing for cooling systems for internal-combustion engines — Specification

JIS B 8360:2015 橡胶软管组件. 用于液压应用的金属或纺织增强的单压力类型

Rubber hoses assemblies -- Wire- or textile-reinforced single-pressure types for hydraulic applications

JIS B 8363:2015 液压软管配件用终端部件和适配器

End fittings and adapters for hydraulic hose assemblies

ISO 16964:2015 气瓶.软管组件.规范和试验

Gas cylinders — Flexible hoses assemblies — Specification and testing

GSO ISO 2928:2015 用于液态或气态液化石油气 (LPG) 以及压力高达 25 bar (2.5 MPa) 的天然气的橡胶软管和软管组件 规格

This International Standard specifies requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas and designed for use at working pressures ranging from vacuum to a maximum of 25 bar (2,5 MPa) within the temperature range −30 °C to +70 °C or, for low-temperature hoses (designated -LT), within the temperature range −50 °C to +70 °C.

Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) -- Specification