E36 润滑脂 标准查询与下载

BS 2000-121:2005 石油及其产品的试验方法.从润滑脂中分离油的测定.压力过滤法

This standard describes a method for measuring the oil that separates from a lubricating grease under the conditions of test. NOTE 1 - This method provides a guide to the behaviour of lubricating grease stored in can or drums. The method is not intended to predict the oil separation tendencies of the grease under dynamic service conditions. NOTE 2 - The method can be used for semi-fluid greases but the precision for these materials has not been established.

Methods of test for petroleum and its products - Part 121: Determination of oil separation from lubricating grease - Pressure filtration method (Identical with IP 121:2005)

BS 2000-168:2003 石油及其产品试验方法.润滑脂滚动轴承性能测定

The method may be used to evaluate a lubricating grease with respect to its ability to lubricate rolling bearings under specified operating conditions and to assess the stability of the grease with respect to physical changes, excess oil separation, and leakage.

Methods of test for petroleum and its products - Part 168: Determination of rolling bearing performance of lubricating grease (Identical with IP 168:2003)

SH/T 0773-2005 汽车轮毂轴承润滑脂寿命特性测定法

本标准规定了在给定试验条件下汽车轮毂轴承润滑脂寿命特性的实验室评定步骤。 本标准除了设备相关数据采用英制单位外，其它均采用国际单位制SI单位。 本标准使用中可能会涉及到有危险的材料、操作和设备。本标准没有指出在使用中所有涉及到的安全问题，因此用户在使用本标准前应建立适当的安全和防护措施并确定有适用性的管理制度。

Standard test method for life performance of automotive wheel bearing grease

JT/T 3-1993 港口机械减速器专用油脂特0号润滑脂技术条件

Special Grease Special No. 0 Grease Specifications for Port Machinery Reducer

SAE J2695-2005 重型车润滑脂

This SAE Recommended Practice was developed by SAE, and the section "Standard Classification and Specification for Service Greases" cooperatively with ASTM, and NLGI. It is intended to assist those concerned with the design of heavy duty vehicle components, and with the selection and marketing of greases for the lubrication of certain of those components on heavy duty vehicles like trucks and buses. The information contained herein will be helpful in understanding the terms related to properties, designations, and service applications of heavy duty vehicle greases.

Heavy Duty Vehicle Lubricating Greases

SAE J310-2005 机动车润滑脂

This SAE Recommended Practice was developed by SAE, and the section "Standard Classification and Specification for Service Greases" cooperatively with ASTM, and NLGI. It is intended to assist those concerned with the design of automotive components, and with the selection and marketing of greases for the lubrication of certain of those components on passenger cars, trucks, and buses. The information contained herein will be helpful in understanding the terms related to properties, designations, and service applications of automotive greases.

Automotive Lubricating Greases

DIN 51826:2005 润滑剂.润滑脂G.分类和要求

This standards is for lubricating greases G of NLGI classes 000 to 1.

Lubricants - Lubricating greases G - Classification and requirements

ASTM D1743-05a 测定润滑脂防腐蚀特性的试验方法

1.1 This test method covers the determination of the corrosion preventive properties of greases using grease-lubricated tapered roller bearings stored under wet conditions. This test method is based on CRC Technique L 41 that shows correlations between laboratory results and service for grease lubricated aircraft wheel bearings.1.2 Apparatus Dimensions8212;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard./p>1.3 All Other Values8212;The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

ASTM D3336-05(2010) 升温下滚珠轴承中润滑脂使用寿命的标准试验方法

This test method can be used to evaluate the ability of grease to provide adequate lubrication for extended periods of ball bearings operating under light loads at high speeds and elevated temperatures.1.1 This test method covers the evaluation of the performance of lubricating greases in ball bearings operating under light loads at high speeds and elevated temperatures. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 8.1.

Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures

ASTM F2519-05(2011) 商用厨房过滤器和萃取器的润滑脂颗粒捕获效率的标准试验方法

The pressure drop results can be added to the pressure drops of other components in an exhaust system to determine the total exhaust fan pressure requirement. The particulate capture efficiency can be used with known particulate size emission data for a cooking appliance-food product combination to determine the total mass of grease particles captured by the filter, the total mass of grease particles that pass through the filter, and the particle size distribution of the grease particles that pass through the filter. Fig. 1 shows an example particle capture efficiency curve. FIG. 1 Particle Capture Efficiency Example Curve1.1 This test method can be used to determine the grease particle capture efficiency of components and systems used in commercial kitchens to capture grease effluent prior to entering the exhaust duct. The results can be used to select a filter system best suited to a particular application. 1.2 This test method is applicable to filter components and systems. The performance information is obtained for new or clean filters and does not include the performance of used or loaded filters. 1.3 The filter can be evaluated with respect to the following (where applicable): 1.3.1 Pressure drop as a function of airflow through the filter (10.3), and 1.3.2 Particulate capture efficiency by particle size (10.4). 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are for information only. 1.5 This test method may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors

ASTM D5706-05(2011)e1 使用高频线性振荡(SRV)试验机测定润滑脂极端压力特性的标准试验方法

This laboratory test method can be used to quickly determine extreme pressure properties of lubricating greases at selected temperatures specified for use in applications where high-speed vibrational or start-stop motions are present with high Hertzian point contact. This test method has found wide application in qualifying lubricating greases used in constant velocity joints of front-wheel-drive automobiles. Users of this test method should determine whether results correlate with field performance or other applications.1.1 This test method covers a procedure for determining extreme pressure properties of lubricating greases under high-frequency linear-oscillation motion using the SRV test machine. This test method can also be used for evaluating extreme pressure properties of lubricating fluid. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine

ASTM D5707-05(2011)e1 使用高频线性振荡(SRV)试验机测量润滑脂摩擦和磨损特性的标准试验方法

This test method can be used to determine wear properties and coefficient of friction of lubricating greases at selected temperatures and loads specified for use in applications where high-speed vibrational or start-stop motions are present for extended periods of time under initial high Hertzian point contact pressures. This test method has found application in qualifying lubricating greases used in constant velocity joints of front-wheel-drive automobiles and for lubricating greases used in roller bearings. Users of this test method should determine whether results correlate with field performance or other applications.1.1 This test method covers a procedure for determining a lubricating grease's coefficient of friction and its ability to protect against wear when subjected to high-frequency, linear-oscillation motion using an SRV test machine at a test load of 200 N, frequency of 50 Hz, stroke amplitude of 1.00 mm, duration of 2 h, and temperature within the range of the test machine, specifically, ambient to 280°C. Other test loads (10 to 1200 N for SRVI-model, 10 to 1400 N for SRVII-model, and 10 to 2000 N for SRVIII-model), frequencies (5 to 500 Hz) and stroke amplitudes (0.1 up to 4.0 mm) can be used, if specified. The precision of this test method is based on the stated parameters and test temperatures of 50 and 80°C. Average wear scar dimensions on ball and coefficient of friction are determined and reported. Note 18212;Optimol Instruments supplies an upgrade kit to allow SRVI/II-machines to operate with 1600 N, if needed. 1.2 This test method can also be used for determining a fluid lubricant's ability to protect against wear and its coefficient of friction under similar test conditions. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

ASTM F2519-05(2011)e1 商用厨房过滤器和萃取器的润滑脂颗粒捕获效率的标准试验方法

5.1 The pressure drop results can be added to the pressure drops of other components in an exhaust system to determine the total exhaust fan pressure requirement. 5.2 The particulate capture efficiency can be used with known particulate size emission data for a cooking appliance-food product combination to determine the total mass of grease particles captured by the filter, the total mass of grease particles that pass through the filter, and the particle size distribution of the grease particles that pass through the filter. Fig. 1 shows an example particle capture efficiency curve. FIG. 1 Particle Capture Efficiency Example Curve 1.1 This test method can be used to determine the grease particle capture efficiency of components and systems used in commercial kitchens to capture grease effluent prior to entering the exhaust duct. The results can be used to select a filter system best suited to a particular application. 1.2 This test method is applicable to filter components and systems. The performance information is obtained for new or clean filters and does not include the performance of used or loaded filters. 1.3 The filter can be evaluated with respect to the following (where applicable): 1.3.1 Pressure drop as a function of airflow through the filter (10.3), and 1.3.2 Particulate capture efficiency by particle size (10.4). 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are for information only. 1.5 This test method may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors

ASTM D1743-05 测定润滑脂防腐蚀特性的试验方法

1.1 This test method covers the determination of the corrosion preventive properties of greases using grease-lubricated tapered roller bearings stored under wet conditions. This test method is based on CRC Technique L 41178; that shows correlations between laboratory results and service for grease lubricated aircraft wheel bearings.1.2 Apparatus Dimensions8212;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.3 All Other Values8212;The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

ASTM D3336-05 高温下滚珠轴承中润滑脂使用寿命的标准试验方法

1.1 This test method covers the evaluation of the performance of lubricating greases in ball bearings operating under light loads at high speeds and elevated temperatures.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see .

Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures

ASTM D3336-05e1 高温下滚珠轴承中润滑脂使用寿命的标准试验方法

This test method can be used to evaluate the ability of grease to provide adequate lubrication for extended periods of ball bearings operating under light loads at high speeds and elevated temperatures.1.1 This test method covers the evaluation of the performance of lubricating greases in ball bearings operating under light loads at high speeds and elevated temperatures.1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standardThis standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 8.1.

Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures

ASTM D5969-05 在含稀释合成海水环境下测定润滑脂防腐蚀性能的标准试验方法

1.1 This test method covers the determination of the corrosion-preventive properties of greases using grease-lubricated tapered roller bearings exposed to various concentrations of dilute synthetic sea water stored under wet conditions. It is based on Test Method D 1743, which is practiced using a similar procedure and distilled water. The reported result is a pass or fail rating as determined by at least two of three bearings.1.2 Apparatus Dimensions8212;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.3 All Other Values8212;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

ASTM D5969-05e1 在含稀释合成海水环境下测定润滑脂防腐蚀性能的标准试验方法

1.1 This test method covers the determination of the corrosion-preventive properties of greases using grease-lubricated tapered roller bearings exposed to various concentrations of dilute synthetic sea water stored under wet conditions. It is based on Test Method D 1743, which is practiced using a similar procedure and distilled water. The reported result is a pass or fail rating as determined by at least two of three bearings.1.2 Apparatus Dimensions8212;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.3 All Other Values8212;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

ASTM D5969-05e2 在含稀释合成海水环境下测定润滑脂防腐蚀性能的标准试验方法

This test method differentiates the relative corrosion-preventive capabilities of lubricating greases under the test conditions.1.1 This test method covers the determination of the corrosion-preventive properties of greases using grease-lubricated tapered roller bearings exposed to various concentrations of dilute synthetic sea water stored under wet conditions. It is based on Test Method D 1743, which is practiced using a similar procedure and distilled water. The reported result is a pass or fail rating as determined by at least two of three bearings.1.2 Apparatus Dimensions8212;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.3 All Other Values8212;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

ASTM D1743-05ae1 测定润滑脂防腐蚀特性的试验方法

This test method differentiates the relative corrosion-preventive capabilities of lubricating greases under the conditions of the test.1.1 This test method covers the determination of the corrosion preventive properties of greases using grease-lubricated tapered roller bearings stored under wet conditions. This test method is based on CRC Technique L 41178; that shows correlations between laboratory results and service for grease lubricated aircraft wheel bearings.1.2 Apparatus Dimensions8212;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.3 All Other Values8212;The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases