E90 石油勘探、开发、集输设备综合 标准查询与下载

ASTM F1413-07 溢油分散剂应用设备的标准指南:输油管和喷油嘴系统

1.1 This guide covers design criteria, requirements, material characteristics, and essential features for oil spill dispersant application systems. This guide is not intended to be restrictive to a specific configuration.1.2 This guide covers spray systems employing booms and nozzles and is not fully applicable to other systems such as fire monitors, sonic distributors, or fan-spray guns.1.3 This guide covers systems for use on ships or boats and helicopters or airplanes.1.4 This guide is one of four related to dispersant application systems using booms and nozzles. One is on design, one on calibration, one on deposition measurements, and one on the use of the systems. Familiarity with all four guides is recommended.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems

ASTM F1460-07 校准溢油分散剂应用设备输油管和喷油嘴系统的标准实施规程

This practice will enable calibration of oil spill dispersant application equipment and ensure a desired dosage and uniformity across the swath width. The data provided by the methods described herein will permit the preparation of a chart relating delivery rate with application vehicle speed, flow meter reading or pump setting so that in actual application, the desired dosage will be achieved. This practice will ensure that a dispersant application system is functional, capable of delivering a specified dosage, and that major components are operational. This will also ensure that the unit is functioning according to design specifications as detailed in Guide F 1413.1.1 This practice covers uniform procedures for determining and reporting the dosage rate of oil spill dispersant application equipment.1.2 This practice is applicable to spray systems employing booms and nozzles and is not fully applicable to other systems such as fire monitors, sonic distributors, or fan-spray guns.1.3 This practice is applicable to systems for use on ships or boats and helicopters or airplanes.1.4 This practice is one of four related to dispersant application systems using booms and nozzles. One is on design, one on calibration, one on deposition, and one on the use of the systems. Familiarity with all four standards is recommended.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems

BS ISO 19904-1:2006 石油和天然气工业.漂浮海上设施.单体船、半潜水船和轻甲板船

ISO 19904-1:2006 provides requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support production, storage and/or offloading, drilling and production, production, storage and offloading, and drilling, production, storage and offloading.

Petroleum and natural gas industries - Floating offshore structures - Monohulls, semi-submersibles and spars

DIN EN ISO 13503-5:2006 石油和天然气工业.完井液和材料.第5部分:测量重盐水长期电导率程序(ISO 13503-5:2006)

This International Standard contains procedures for measuring the long term conductivity of proppants.

Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants (ISO 13503-5:2006); English version EN ISO 13503-5:2006

ISO 13503-4:2006 石油和天然气工业.完井液和材料.第4部分:在静态条件下测量外部碰击和砂砾包装液体泄露程序

This part of ISO 13503 provides for consistent methodology to measure fluid loss of stimulation and gravel-pack fluid under static conditions. However, the procedure in this part of ISO 13503 excludes fluids that react with porous media.

Petroleum and natural gas industries - Completion fluids and materials - Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions

SY/T 0540-2006 石油工业用加热炉型式与基本参数

本标准规定了石油工业用加热炉的型式、参数系列、型谱，并规定了产品型号的编制方法。 本标准适用于陆上油气田和长输管道用石油工业用加热炉（以下简称加热炉）

Type and basal parameters of heaters for petroleum industry

BS EN ISO 15547-2:2005 石油、石化和天然气工业.板式热交换器.铜焊铝板热交换器

ISO 15547-2:2005 gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical and natural gas industries.

Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Brazed aluminium plate-fin heat exchangers

ISO 13503-3:2005 石油和天然气工业.完井液和材料.第3部分:重盐水的试验

This part of ISO 13503 covers the physical properties, potential contaminants and test procedures for heavy brine fluids manufactured for use in oil and gas well drilling, completion and workover fluids. This part of ISO 13503 provides methods for assessing the performance and physical characteristics of heavy brines for use in field operations. It includes procedures for evaluating the density or specific gravity, the clarity or amount of particulate matter carried in the brine, the crystallization point or the temperature (both ambient and under pressure) at which the brines make the transition between liquid and solid, the pH, and iron contamination. It also contains a discussion of gas hydrate formation and mitigation, brine viscosity, corrosion testing, buffering capacity and a standardised reporting form. This part of ISO 13503 is intended for the use of manufacturers, service companies and end-users of heavy brines.

Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines

ISO 13503-1:2003/Cor 1:2005 石油和天然气工业.完井液和材料.第1部分:完井液粘性测量.技术勘误1

This standard is Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids; Technical Corrigendum 1

Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids; Technical Corrigendum 1

ISO 14692-3:2002/cor 1:2005 石油和天然气工业.玻璃增强塑料(GRP)管.第3部分:系统设计.技术勘误1

This is Technical Corrigendum 1 to ISO 14692-2002 (Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design)

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design; Technical Corrigendum 1

ISO 14692-2:2002/cor 1:2005 石油和天然气工业.玻璃增强塑料(GRP)管.第2部分:合格鉴定和制造.技术勘误1

This is Technical Corrigendum 1 to ISO 14692-2002 (Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture )

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture; Technical Corrigendum 1

NF M87-213*NF EN ISO 10432:2005 石油和天然气工业.下降孔设备.地下安全阀设备

La présente Norme internationale définit les exigences minimales acceptables pour les vannes de sécurité de fond (SSSV). Elle concerne les vannes de sécurité de fond et toutes les pièces fixant les tolérances et/ou les jeux qui peuvent affecter les performances ou l'interchangeabilité des équipements des vannes de sécurité de fond. Cela inclut les opérations de réparation et connexions d'interface avec le contrôle de débit ou avec d'autres équipements, mais ne comprend pas les connexions à la complétion du puits.

Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment.

SY/T 6327-2005 石油钻采机械产品型号编制方法

本标准规定了石油钻采机械产品的型号编制方法。 本标准适用于石油钻井设备、采油设备、钻井采油工具、封隔器和钻采设备用气动元件产品、不适用于车装设备。

Oil field drilling and production equipment-mtehod of type designation

ISO 15156-3:2003/Cor 1:2005 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第1部分:耐裂化CRAs(防腐蚀合金)和其他合金.技术勘误1

This is Technical Corrigendum 1 to ISO 15156-3-2003 (Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys)

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys; Technical Corrigendum 1

KS B ISO 16812:2004 石油和天然气工业.船体和导管用热交换器

이 규격은 석유 및 천연 가스 산업에 사용되는 원통 다관형 열교환기의 기계적 설계, 재료

Petroleum and natural gas industries-Shell-and-tube heat exchangers

KS M ISO 20764:2004 石油和相关产品.水量测定用高沸点流体试验区的准备.氮净化法

이 규격은 200℃ 이상의 끓는 점을 가진 석유 및 관련 제품의 시료 준비를 위한 2가

Petroleum and related products－Preparation of a test portion of high-boiling liquids for the determination of water content－Nitrogen purge method

ISO 17292:2004 石油、石化和相关工业用金属球阀

This International Standard specifies the requirements for a series of metal ball valves suitable for petroleum, petrochemical, natural gas plants, and related industrial applications. It covers valves of the nominal sizes DN — 8; 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 150; 200; 250; 300; 350; 400; 450; 500 corresponding to nominal pipe sizes NPS — 1/4; 3/8; 1/2; 3/4; 1; 5/4; 3/2; 2; 5/2; 3; 4; 6; 8; 10; 12; 14; 16; 18; 20; and applies for pressure designations — Class 150; 300; 600; 800 (Class 800 applies only for valves with reduced bore and with threaded and socket welding end); — PN 16; 25; 40. It includes provisions for testing and inspection and for valve characteristics as follows: — flanged and butt-welded ends, in sizes 15 ≤ DN ≤ 500 (1/2 ≤ NPS ≤ 20); — socket welding and threaded ends, in sizes 8 ≤ DN ≤ 50 (1/4 ≤NPS ≤ 2); — body seat openings designated as full bore, reduced bore and double reduced bore; — materials.

Metal ball valves for petroleum, petrochemical and allied industries

SY/T 0538-2004 管式加热炉规范

本标准规定了管式加热炉(以下简称管式炉)设计、制造、检验与验收的基本要求。 本标准适用于油气田和长输管道燃油、燃气管式炉的设计、制造、检验与验收。改建的管式炉可参照执行。

Specification for Tube Heated Furnaces

ISO 13680:2000/Cor 2:2004 石油和天然气工业.用作套管、油管和接箍的防腐合金无缝钢管.交货技术条件.技术勘误2

This is Technical Corrigendum 2 to ISO 13680-2000 (Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions)

Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions; Technical Corrigendum 2

ISO 20764:2003 石油和相关产品.水量测定用高沸点流体试验区的准备.氮净化法

This International Standard specifies two procedures for the preparation of test portions from petroleum and related products boiling above 200 ℃, which can then be used for the determination of total water content within the range of 3 mg/kg to 1 000 mg/kg. The method is applicable to unused and used lubricating oils, non-aqueous hydraulic fluids and high-boiling solvents. The test portions generated by these procedures are suitable for standard Karl Fischer water-content determinations, such as those described in ISO 6296 (see [1] in the Bibliography) and ISO 12937 (see [2] in the Bibliography).

Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method