E90 石油勘探、开发、集输设备综合 标准查询与下载
共找到 249 条与 石油勘探、开发、集输设备综合 相关的标准，共 17 页
SY/T 0511的本部分规定了石油储罐钢制孔类附件设计、材料、制造、检验与验收等方面的基本要求。 本部分适用于常压（包括微内压）石油储罐。
Oil tank appurtenances.Part 8:Steel holes
- ICS
- CCS
- E90
- 发布
- 2011-01-09
- 实施
- 2011-05-01
本标准规定了井温仪的技术要求、校准条件、校准项目和校准方法。 本标准适用于新制造、使用中和修理后的井温仪及组合测井仪温度部分的校准。
The calibration method of the down hole temperature logging tool
- ICS
- 75.180
- CCS
- E90
- 发布
- 2011-01-09
- 实施
- 2011-05-01
SY/T 0511的本部分规定了石油储罐用液压安全阀结构、材料、性能、制造、试验、检验与验收等方面的基本要求。 本部分适用于常压（包括微内压）固定顶石油储罐。
Oil tank appurtenances.Part 2:Hydraulic safety valve
- ICS
- CCS
- E90
- 发布
- 2011-01-09
- 实施
- 2011-05-01
本标准规定了钻井液含砂量测定仪的技术要求、校准条件、校准方法、校准结果处理和校准间隔。 本标准适用于新制造、使用中和修理后含砂仪的校准。
Calibration method of equipment for measuring sand content in drilling fluids
- ICS
- 75.180
- CCS
- E90
- 发布
- 2011-01-09
- 实施
- 2011-05-01
SY/T 0511的本部分规定了石油储罐用二次密封装置的结构、材料、安装等基本要求。 本部分适用于钢制浮顶石油储罐。
Oil tank appurtenances.Part 5:Secondary seal
- ICS
- CCS
- E90
- 发布
- 2011-01-09
- 实施
- 2011-05-01
SY/T 0511的本部分规定了浮顶储罐用自动通气阀的结构、材料、性能、制造、检验与验收等方面的基本要求。 本部分适用于钢制浮顶石油储罐。 本部分不适用于铝制和不锈钢制内浮顶石油储罐。
Oil tank appurtenances.Part 3:Automatic bleeder vent
- ICS
- CCS
- E90
- 发布
- 2011-01-09
- 实施
- 2011-05-01
SY/T 0511的本部分规定了浮顶排水管系统的技术要求、试验方法、检验规则、标志、包装、运输及储存等方面的基本要求。 本部分适用于钢制浮顶石油储罐。
Oil tank appurtenances.Part 6:Primary roof drains
- ICS
- CCS
- E90
- 发布
- 2011-01-09
- 实施
- 2011-05-01
SY/T 0511的本部分规定了石油储罐用呼吸阀分类、结构、材料、性能、制造、试验与检验等方面的基本要求。 本部分适用于常压（包括微内压）石油储罐。
Oil tank appurtenances.Part 1:Breather valve
- ICS
- CCS
- E90
- 发布
- 2011-01-09
- 实施
- 2011-05-01
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2009); German version EN ISO 15156-
- ICS
- 75.180.10;77.060
- CCS
- E90
- 发布
- 2010-12
- 实施
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2009); German version EN ISO 15156-3:20
- ICS
- 75.180.10;77.060
- CCS
- E90
- 发布
- 2010-12
- 实施
Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010); German version EN ISO 21457:2010
- ICS
- 75.180.10
- CCS
- E90
- 发布
- 2010-12
- 实施
This International Standard identifies the corrosion mechanisms and parameters for evaluation when performing selection of materials for pipelines, piping and equipment related to transport and processing of hydrocarbon production, including utility and injection systems. This includes all equipment from and including the well head, to and including pipelines for stabilized products. This International Standard is not applicable to downhole components. Guidance is given for the following: - corrosion evaluations; - materials selection for specific applications, or systems, or both; - performance limitations for specific materials; - corrosion control. This International Standard refers to materials that are generally available, with properties that are known and documented. It also allows other materials to be evaluated and qualified for use. This International Standard does not provide detailed material requirements or guidelines for manufacturing and testing of equipment. Such information can be found in particular product and manufacturing standards.
Petroleum, petrochemical and natural gas industries. Materials selection and corrosion control for oil and gas production systems
- ICS
- 75.180.01
- CCS
- E90
- 发布
- 2010-09-30
- 实施
- 2010-09-30
Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems
- ICS
- 75.180.01
- CCS
- E90
- 发布
- 2010-09
- 实施
本标准规定了碳钢、合金钢和奥氏体不锈钢对焊管件——弯头、三通和四通、异径接头、管帽、松套法兰翻边短节，以及对焊支管座设计、材料、制造、检验、试验、标志和验收的基本要求。 本标准适用于油、气输送管道系统、公用管道系统以及工业管道系统。
Code for steel butt-welding fittings
- ICS
- 75.180
- CCS
- E90
- 发布
- 2010-08-27
- 实施
- 2010-12-15
This part of ISO 15156 describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipmnent used in oil and gas production and in natural-gas sweetening plants in H2S-containing environments.
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2009); German version EN ISO 15156-1:2009
- ICS
- 75.180.10;77.060
- CCS
- E90
- 发布
- 2010-06
- 实施
本标准规定了石油管材制造涂敷驻厂监造的内容、程序等，涉及购方、供方和购方代表三者之间的关系，明确了各方责任、检验人员资格、检测仪器及设备、监造工作内容、报告内容等。 本标准适用于石油管材生产和涂敷生产期间的驻厂监造。
Specification for purchaser representative surveillance on oil tubular goods
- ICS
- 75.180
- CCS
- E90
- 发布
- 2010-05-01
- 实施
- 2010-10-01
Petroleum, petrochemical and natural gas industries - Method of test for fire dampers
- ICS
- CCS
- E90
- 发布
- 2010-02-28
- 实施
- 2010-02-28
This Technical Specification specifies a method for determining the following: a) ability of fire dampers installed in ventilation systems to prevent the spread of fire and heat through designated fire divisions; typical ratings are given in ISO 13702:1999, Table C.5. b) fire damper operational reliability in the petroleum, petrochemical and natural gas industries, particularly offshore installations; NOTE It is planned to determine the methodology during the testing and development phase. c) ability of fire dampers installed in ventilation systems to withstand blast overpressures that may result from the explosion of a flammable gas. This Technical Specification applies to different start-up operations for different types of furnace and, therefore, tolerances in test conditions at the beginning of the test are not described in detail. The fire test enables only a limited assessment of the actuating mechanism being carried out and additional tests can be necessary to fully evaluate its operational reliability.
Petroleum, petrochemical and natural gas industries - Method of test for fire dampers
- ICS
- 75.180.10
- CCS
- E90
- 发布
- 2010-02-01
- 实施
This part of ISO 19901 provides requirements and guidance for the planning and engineering of marine operations, encompassing the design and analysis of the components, systems, equipment and procedures required to perform marine operations, as well as the methods or procedures developed to carry them out safely. This part of ISO 19901 is applicable to marine operations for offshore structures including - steel and concrete gravity base structures (GBS); - piled steel structures and compliant towers; - tension leg platforms (TLP); - deep draught floaters (DDF), including spars or deep draught caisson vessels (DDCV); - floating production semi-submersibles (FPSS); - floating production, storage and offloading vessels (FPSO); - other types of floating production systems (FPS); - mobile offshore units (MOU); - topsides and components of any of the above; - subsea templates and similar structures; - gravity, piled, drag embedded and suction or other anchors; - tendon foundations; - associated mooring systems. This document is also applicable to modifications of existing structures, e.g. installation of additional topsides modules. This part of ISO 19901 is not applicable to the following marine operations: a) construction activities, e.g. in a fabrication yard onshore, where there is no exposure to the marine environment; b) drilling, processing and petrochemical activities; c) routine marine activities during the service life of the structure; d) drilling from mobile offshore drilling units (MODU); e) installation of pipelines, flowlines, risers and umbilicals; f) diving.
Petroleum and natural gas industries - Specific requirements for offshore structures - Marine operations
- ICS
- 75.180.10
- CCS
- E90
- 发布
- 2010-01-31
- 实施
- 2010-01-31
SY/T 6679的本部分规定了综合录井仪数据采集系统的技术要求及校准条件、校准项目、校准方法、校准处理和校准间隔。 本部分适用于新制造、使用中和修理后的数据采集系统校准。
Calibration method of mud logging unit.Part 3:Data acquisition system
- ICS
- 75.180
- CCS
- E90
- 发布
- 2009-12-01
- 实施
- 2010-05-01
