共找到 249 条与 石油勘探、开发、集输设备综合 相关的标准,共 17 页
Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013); English version EN ISO 14998:2013
Petroleum and natural gas industries. Downhole equipment. Completion accessories
Petroleum and natural gas industries - Drilling and production equipment - Part 4: practices for side-pocket mandrels and related equipment
本标准规定了管式加热炉设计、制造、检验与验收的基本要求。本标准适用于油气田和油气输送管道燃油、燃气管式炉的设计、制造、检验与验收。
Specification for tubular heater
本标准规定了输气管道工程用过滤分离设备中旋风分离器、过滤分离器和气-液聚结分离器的设计、制造、检验和验收的基本要求。
Specification for filtration & separation equipment of gas transmission pipeline engineering
Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests - Amendment 1 : barite 4,1.
Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment.
Technical specification for operation quality control of once-through steam injection boilers for oilfields
Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas production. Elastomers
本标准规定了复合材料内衬井下油管的设计、制造、质量评定和应用,也可扩展至复合材料内衬集输管线。 本标准主要适用于多相流体、烃类气体、烃类液体和水的处理及输送用复合材料内衬钢管。 复合材料内衬油管通常采用在钢管内部衬以纤维增强聚合物内衬的形式保护钢管基材免受流体腐蚀。接头可采用API螺纹或特殊螺纹,且通常采用腐蚀隔离环来保证相邻衬里间隙内的耐腐蚀性能。 本标准不仅包括了材料选择、产品质量评定、安全和设计系数的定义等内容,还包括了质量控制试验、静水压试验、尺寸、材料性能、物理性能和最低性能要求等。 本标准主要适用于直径250mm(10in)以下、工作压力69MPa(10000psi)以下、使用温度150℃(300°F)以下的复合材料内衬钢管。此外,其设计原则也可适用于超出上述范围的产品。
Petroleum and natural gas industries.Composite lined steel tubular goods
本标准规定了电子式井下压力计(以下简称电子压力计)的技术要求、校准条件、校准项目和校准方法。 本标准适用于新制造、使用中和修理后的电子式压力计的校准。
Calibration method for the down hole electronic pressure gauge
Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments
Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers
本标准规定了钻井液含砂量测定仪的技术要求、校准条件、校准方法、校准结果处理和校准间隔。 本标准适用于新制造、使用中和修理后含砂仪的校准。
Calibration method of equipment for measuring sand content in drilling fluids
本标准规定了抗(耐)震压力表校准的技术要求、条件、项目、方法以及校准周期。 本标准适用于新制造、使用中和修理后的测量范围为0MPa~100MPa的表壳内有灌充液、具有抗(耐)震功能的直接指示(显示)式压力表;也适用于新制造、使用中和修理后的测量范围为0MPa~100MPa表壳内有灌充液并带阻尼元件、具有抗(耐)震功能的直接指示(显示)式压力表。
Calibration method of the shock-resistant pressure gauge
本标准规定了连通管式油井气、液计量分离器的技术要求、计量性能、校准设备、计量控制要求。 本标准适用于单容积、双容积和具有气储存方式的连通管式油井气、液计量分离器首次和使用中的校准。
Calibration method of the measurment separator for oilwell
本标准规定了井温仪的技术要求、校准条件、校准项目和校准方法。 本标准适用于新制造、使用中和修理后的井温仪及组合测井仪温度部分的校准。
The calibration method of the down hole temperature logging tool
本标准规定了岩石气体渗透率测定仪的技术要求、校准条件、校准项目和校准方法、校准结果处理和复校时间间隔。 本标准适用于测量范围在0.01mD~3000mD之间的渗透率仪校准。
The calibration method of measuring instruments of core gas
SY/T 0511的本部分规定了石油储罐钢制孔类附件设计、材料、制造、检验与验收等方面的基本要求。 本部分适用于常压(包括微内压)石油储罐。
Oil tank appurtenances.Part 8:Steel holes
本标准规定了双频道回声测试仪的校准条件、校准项目和校准方法、校准结果处理及复校时间间隔等内容。 本标准适用于新制造、使用中和修理后的CJ-X型双频道回声仪的校准,其他型号的回声仪主要技术指标达到本标准要求,校准方法可参照本标准执行。
Calibration method of the double-channel echo instrument
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号