K11 裸电线 标准查询与下载

ASTM B298-07 镀银的软或退火铜线用标准规范

1.1 This specification covers silver-coated, soft or annealed, round copper wire, intended for use in electrical equipment, as follows:1.1.1 Class A - Wire whose silver coating is at least 1.25 % of the total weight of the coated wire.1.1.2 Class B - Wire whose silver coating is at least 2.50 % of the total weight of the coated wire.1.1.3 Class C - Wire whose silver coating is at least 4.00 % of the total weight of the coated wire.1.1.4 Class D - Wire whose silver coating is at least 6.10 % of the total weight of the coated wire.1.1.5 Class E - Wire whose silver coating is at least 10.00 % of the total weight of the coated wire.1.2 Silver-coated wire having different minimum percentages of silver by weight may be obtained by mutual agreement between the manufacturer and the purchaser. For information purposes the thickness of coating in microinches provided by the percentages listed above is shown in (Explanatory ).1.3 The SI values of resistance and density are to be regarded as standard. For all other properties values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information purposes only.The following precautionary caveat pertains only to the test method section of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements see Table 1 and Explanatory Note 1.

Standard Specification for Silver-Coated Soft or Annealed Copper Wire

ASTM B869-07(2013) 有线电视(CATV)停经片用包铜钢电导线的标准规格

1.1 This specification covers 218201;% conductivity hard-drawn round copper-clad steel wire for coaxial cable center conductors (Note 1). Note 1—Wire ordered to this specification is not intended for redrawing since it is furnished in the hard-drawn temper. If wire is desired for the purpose, the manufacturer should be consulted. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire

ASTM B230/B230M-07 电工用1350-H19系列铝线标准规范

1.1 This specification covers aluminum 1350-H19 (extra hard) round wire for electrical purposes. 1.2 The values stated in inch-pound or SI units are to be regarded separately as standard. The values in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.1.2.1 For density, resistivity, and temperature, the values stated in SI units are to be regarded as standard.Note 18212;Prior to 1975 aluminum 1350 was designated EC aluminum.Note 28212;The aluminum and temper designations conform to ANSI H35.1/H35.1M. Aluminum 1350 corresponds to UNS A91350 in accordance with Practice E 527.Note 38212;For definitions of terms found in this specification relating to uninsulated electrical conductors see Terminology B 354.

Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes

ASTM B869-07 共用天线电视(CATV)停经片用包铜钢电导线的标准规范

1.1 This specification covers 21 % conductivity hard-drawn round copper-clad steel wire for coaxial cable center conductors (Note 1). Note 1 - Wire ordered to this specification is not intended for redrawing since it is furnished in the hard-drawn temper. If wire is desired for the purpose, the manufacturer should be consulted.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire

ASTM B286-07(2012) 电子设备连接线用铜导线标准规格

1.1 This specification covers uninsulated metallic-coated copper conductors for use in hookup wire for electronic equipment. 1.2 The SI values for density are to be regarded as standard. For all other properties, the inch-pound values are to be regarded as the standard.

Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment

ASTM B236M-07 电气用铝汇流条的标准规范(母线)(米制系列)

1.1 This specification covers Aluminum 1350 bar for electric conductors in the tempers shown in Table 1.1.2 Aluminum and temper designations are in accordance with ANSI H35.1M. The equivalent Unified Numbering System designation is A91350 in accordance with Practice E 527. For Alloy 6101 bus conductors, refer to Specification B 317/B 317M.Note 1Prior to 1975, Aluminum 1350 was designated as EC aluminum.1.3 This specification is the metric counterpart of Specification B 236.1.4 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A1.

Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]

ASTM B286-07 电气设备连接线用铜导线的标准规范

1.1 This specification covers uninsulated metallic-coated copper conductors for use in hookup wire for electronic equipment.1.2 The SI values for density are to be regarded as standard. For all other properties, the inch-pound values are to be regarded as the standard.

Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment

ASTM B84-07 精密电阻器用合金丝温度电阻常数的标准试验方法

Procedure A covers the determination of the equation of the curve relating resistance and temperature where the curve approximates a parabola. This test method may be used for wire of any metal or alloy over the temperature interval appropriate to the material. Procedure B covers the determination of the mean temperature coefficient of resistance for wire of any metal or alloy over the temperature interval appropriate to the material.1.1 This test method covers determination of the change of resistance with temperature of alloy wires used for resistance standards and precision resistors for electrical apparatus.1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors

NF C31-888-3:2006 超导性.第3部分:临界电流测量.Bi-2212和Bi-2223氧化物银包套超导体的直流临界电流

Superconductivity - Part 3 : critical current measurement - DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors.

KS C IEC 60888:2006 绞线用镀锌钢线

이 규격은 가공 전력 전송용 도체의 보강 또는 건설에 이용하는 아연 도금 강선에 적용한다.

Zinc-coated steel wires for stranded conductors

JCS 1321-2006 耐热硬铜绞线

Thermo-resistant hard-drawn copper stranded conductors

DIN V 46454-3:2006 零偏差绕组线. 第3部分: 直焊性聚氨脂漆包圆铜线, 等级180

This Standard specifies the requirements of solderable enamelled zero defect round copper wire, class 180.#,,#

Zero defect winding wires - Part 3: Solderable electrically polyurethane enamelled round copper wire, class 180

DIN V 46454-2:2006 无缺陷绕组线. 第2部分: 电气性能试验方法

This standard applies to the electrical properties of zero defect winding wires.

Zero defect winding wires - Part 2: Test methods, electrical properties

DIN V 46454-1:2006 零缺陷绕组线. 第1部分: 一般要求. 公称直径为0. 040 mm-1. 600 mm的电漆包圆铜线

This standard applies to specifications for electrically zero defect enamelled round coppier wire.

Zero defect winding wires - Part 1: General requirements - Electrically enamelled round copper wire with nominal diameter 0,040 mm to 1,600 mm

DIN EN 50182 Berichtigung 1:2006 架空线路用导线.圆线共轴布线绞合导线

Conductors for overhead lines - Round wire concentric lay stranded conductors - German version EN 50182:2001, Corrigenda to DIN EN 50182:2001-12; CENELEC-Corrigendum June 2005 zu EN 50182:2001

JIS H 7311:2006 超导性.交流电损耗测量.铜/铌-钛多纤维复合材料磁滞损耗的磁强计测量法

この規格は，変動磁界の周波数が0～0.06Hzにおける磁力計法によるニオブ-チタン複合超電導線におけるヒステリシス損失測定方法について規定する。

Superconductivity -- AC loss measurements -- Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites

JIS H 7310:2006 超导性.交流电损耗测量.用拾波线圈法测量暴露于横向交流磁场的Cu/Nb-Ti合成超导导线的交流电总损耗量

この規格は，変動磁界周波数領域が0.005～1Hzの交流横磁界中のニオブ-チタン複合超電導線における全交流損失を，ビックアップコイル法で測定する方法について規定する。

Superconductivity -- AC loss measurements -- Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method

NF C31-888-6:2006 超导体.第6部分:机械性能测量.铜/铌-钛复合超导体室温拉伸试验

Superconductivity - Part 6 : mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors.

JIS H 7309:2006 超导性.第10部分:临界温度测量.用电阻法对Nb-Ti、 Nb3Sn和铋-系统氧化物复合超导体的临界温度的测量

この規格は,工業用に使われる銅安定化形ニオブーチタン,銅安定化銅ニッケル三層形ニオブーチタン，銅ニッケル·ニオブーチタン及び銅安定化形ニオブ3すず複合超電導導体並びに金属安定化ビスマス系酸化物超電導導体の抵抗法による臨界温度試験方法について規定する。

Superconductivity -- Part 10: Critical temperature measurement -- Critical temperature of Nb-Ti, Nb3Sn, and Bi-system oxide composite superconductors by a resistance method

JIS H 7308:2006 超导性.第12部分:基块超导体体积比例的测量.Nb3Sn复合超导金属线的铜对非铜体积比例

この規格は，銅安定化ニオブ3すず多心フイラメント複合超電導線(以下，銅安定化Nb3Sn線という。)の非銅部に対する銅部の体積比を決める試験方法について規定する。

Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires