L66 受计算机控制的电子器具 标准查询与下载

GB/T 16518-1996 电子琴音乐性能评价规范

本标准适用于键盘式电子琴音乐性能的主观评价，其内容包括音乐功能评价、音质评价、手感和外观评价三个部分。 音乐功能评价和音质评价应在试听室内进行，对于手感和外观评价的声学环境条件不作硬性规定。

Specification of assessment or musical performance on eleclronic organ

GB/T 4967-1995 电子计算器通用技术条件

本标准规定了电子计算器的通用技术条件，主要内容包括：术语、产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存等。 本标准适用于电子计算器（以下简称计算器），并作为制定产品标准的依据。

General specification for electronic calculators

BS ISO 19649:2017 移动机器人. 词汇

Mobile robots. Vocabulary

ASTM E3132/E3132M-17 评价响应机器人物流的标准实施规程: 系统配置

5.1 These basic requirements for response robots that help enhance the safety and effectiveness of responders or soldiers include: the robots are designed to be remotely operated from safe standoff distances, deployable at operational tempos, capable of operating in complex environments, sufficiently hardened against harsh environments, reliable and field serviceable, durable or cost-effectively disposable, and equipped with operational safeguards. 5.2 This practice aligns user expectations with actual capabilities to understand the inherent trade-offs in deployable systems at any given cost. For example, a design issue of the number of batteries to be packed on a robot could affect the desired weight, endurance, or cost. Appropriate levels of understanding can help ensure that requirement specifications are articulated within the limit of current capabilities. 5.3 This practice provides a tangible representation of essential robot capabilities with quantifiable measures of performance. It facilitates communication among communities of robot users and manufacturers. As such, this practice can be used to help: 5.3.1 Inspire technical innovation and guide developers toward implementing the combinations of capabilities necessary to perform essential mission tasks. 5.3.2 Measure and compare essential robot capabilities. This practice can help establish the reliability of the system to perform specified tasks, highlight break-through capabilities, and encourage hardening of developmental systems. 5.3.3 Inform purchasing decisions, conduct acceptance testing, and align deployment objectives with statistically significant robot capabilities data captured through repeated testing and comparison of quantitative results. 5.3.4 Focus operator training and measure proficiency as a repeatable practice task that exercises actuators, sensors, and operator interfaces. The practice can help capture and compare quantitative scores even within uncontrolled environmental variables and, in turn, help develop, maintain, measure, and track very perishable skills over time and enable comparisons across squads, regions, or national averages. 5.4 Although this practice is scoped for homeland security applications, it could be much more wildly applicable. However, it shall be the responsibilities of the respective practitioners to verify the extents of applicability of this practice to their domains. 1.1 This practice, as a part of the response robot logistics test suite, specifies the requirements of identifying and documenting the configuration of a robot system under test as well as the associated processes for doing it. The aspects to be included in such a configuration practice are the key dimensions and weights, the existent subsystems and key components, as well as the key timing requirements for setting up and maintaining the system. 1.2 This practice applies to ground, aerial, and aquatic response robot systems controlled remotely by an operat......

Standard Practice for Evaluating Response Robot Logistics: System Configuration

JIS B 8437:2016 机器人和机器人设备.协调系统和运动术语

Robots and robotic devices -- Coordinate systems and motion nomenclatures

JIS B 8446-1:2016 个人护理机器人的安全要求. 第1部分: 无机械手的静态稳定移动式仆从机器人

Safety requirements for personal care robots -- Part 1: Static stable mobile servant robot with no manipulator

JIS B 8446-3:2016 个人护理机器人的安全要求. 第3部分: 自平衡载人机器人

Safety requirements for personal care robots -- Part 3: Self-balancing person carrier robot

JIS B 8446-2:2016 个人护理机器人的安全要求. 第2部分: 低功耗约束型物理辅助机器人

Safety requirements for personal care robots -- Part 2: Low power restraint-type physical assistant robot

BS ISO 14817-2:2015 智能运输系统. ITS中央数据字典. ITS中央数据概念注册表的整理

Intelligent transport systems. ITS central data dictionaries. Governance of the Central ITS Data Concept Registry

BS ISO 14817-1:2015 智能运输系统. ITS中央数据字典. ITS数据定义的要求

Intelligent transport systems. ITS central data dictionaries. Requirements for ITS data definitions

JIS B 8433-2:2015 机器人和机器人装置. 工业机器人的安全要求. 第2部分: 机器人系统和集成

Robots and robotic devices -- Safety requirements for industrial robots -- Part 2: Robot systems and integration

JIS B 8433-1:2015 机器人和机器人装置. 工业机器人的安全要求. 第1部分: 机器人

Robots and robotic devices -- Safety requirements for industrial robots -- Part 1: Robots

JIS B 0134:2015 机器人和机器人装置. 词汇

Robots and robotic devices -- Vocabulary

KS B 6970-2014 室内服务机器人语音识别性能评价方法

이 표준은 학교, 공공장소, 가정 등 실내 서비스 환경에서 운용되는 음성 인식 시스템이 탑재된 서비스 로봇에 대해 음성 인식 성능을 평가하기 위한 시험방법을 규정한다.

Speech recognition performance evaluation methods for indoor service robots

KS B 6938-2014 服务机器人.术语.第2部分:移动和情报

이 표준은 서비스 로봇과 관련하여 사용되는 용어 중 구조 및 이동에 관련된 용어와 이동 계획, 감지 등 지능 요소에 대한 용어를 규정한다.

Service robots — Vocabulary — Part 2: Mobility and intelligence

KS B 6937-2014 服务机器人.术语.第1部分:分类和一般术语

이 표준에서는 제조업에 사용되는 산업용 로봇을 제외한 인간 및 설비에 대해 서비스를 제공하는 서비스 로봇에 대하여 분류하고 관련한 일반 용어를 정의한다.

Service robots — Vocabulary — Part 1: Classification and general definition

EN 1143-2:2014 安全存储单元.要求,分类和防盗的试验方法第2部分：存款系统

This European Standard specifies requirements and tests methods for deposit systems, and classifies the systems according to their burglary resistance and their resistance to the theft of deposits. This European Standard comprises two types of deposit system:- Night safes which provide depositing services for the customers of financial institutions without giving access to the content of the night safe; - Deposit safes which enable the personnel of a company to place money or valuables in safe custody without giving access to the content of the deposit safe. The installation condition for deposit safe according to this European Standard is that the depositing functions are installed inside the premises of the company and are only disposable for the personnel of the company. NOTE Parts of a deposit system are a receiving unit, an input unit and in some cases, a chute. This European Standard includes design requirements for deposit systems controlled by programmable controllers and for the software for these. Controller hardware testing is restricted to mechanical or electromechanical attacks of electric motors, sensors, coils and similar devices; but software testing as attempts to influence controller software or controller hardware is not part of this standard. Deposit systems may have devices for functions such as user identification and/or counting and registration of money. Tests of and requirements for classification of such functions are not included. This European Standard does not cover protection of persons using the deposit system or the prevention of fraud committed by operators of the deposit system.

Secure storage units - Requirements@ classification and methods of tests for resistance to burglary - Part 2: Deposit systems

GOST R ISO 8373-2014 机器人和机器人装置. 词汇

Robots and robotic devices. Vocabulary

SAE J919-2013 声波测量.野外作业机器操作人员.单一型

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This SAE Standard sets forth the instrumentation and procedure to be used in measuring sound pressure levels at the operator position for self-propelled off-road work machines as defined in SAE J 1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. This SAE document is applicable to machines that have operator stations where the operator can either stand or sit

Sound Measurement Off-Road Work Machines Operator Singular Type

DIN ISO 29262:2013 微型系统生产设备.终端执行器和处理系统间接口(ISO 29262-2011)

This International Standard specifies provisions for the interface between end effector and handling systems in production equipment for microsystems.It specifies principal deviations,tolerances and designations for manually and automatically changeable end effectors.The aim is to specify the end effector interface in three levels with an increasing degree of specification.

Production equipment for microsystems - Interface between end effector and handling system (ISO 29262:2011)