L66 受计算机控制的电子器具 标准查询与下载

ASTM C1661-13 远程操作设备观察系统标准指南

4.1 Remote Viewing Components: 4.2 The long-term applicability of a remotely operated radiological facility will be greatly affected by the provisions for remote viewing of normal and off-normal operations within the facility. The deployment of remote viewing systems can most efficiently be addressed during the design and construction phases. 4.2.1 The purpose of this guide is to provide general guidelines for the design and operation of remote viewing equipment to ensure longevity and reliability throughout the period of service. 4.2.2 It is intended that this guide record the general conditions and practices that experience has shown are necessary to minimize equipment failures and maximize the effectiveness and utility of remote viewing equipment. It is also intended to inform designers and engineers of those features that are highly desirable for the selection of equipment that has proven reliable in high radiation environments. 4.2.3 This guide is intended as a supplement to other standards, and to federal and state regulations, codes, and criteria applicable to the design of equipment intended for hot cell use. 4.2.4 This guide is intended to be generic and applies to a wide range of types and configurations of hot cell equipment and remote viewing systems. 1.1 Intent: 1.1.1 This guide establishes the minimum requirements for viewing systems for remotely operated facilities, including hot cells (shielded cells), used for the processing and handling of nuclear and radioactive materials. The intent of this guide is to aid in the design, selection, installation, modification, fabrication, and quality assurance of remote viewing systems to maximize their usefulness and to minimize equipment failures. 1.1.2 It is intended that this guide record the principles and caveats that experience has shown to be essential to the design, fabrication, installation, maintenance, repair, replacement, and, decontamination and decommissioning of remote viewing equipment capable of meeting the stringent demands of operating, dependably and safely, in a hot cell environment where operator visibility is limited due to the radiation exposure hazards. 1.1.3 This guide is intended to apply to methods of remote viewing for nuclear applications but may be applicable to any environment where remote operational viewing is desirable. 1.2 Applicability: 1.2.1 This guide applies to, but is not limited to, radiation hardened and non-radiation hardened cameras (black- and-white and color), lenses, camera housings and positioners, periscopes, through wall/roof viewing, remotely deployable cameras, crane/robot mounted cameras, endoscope cameras, borescopes, video probes, flexible probes, mirrors, lighting, fiber lighting, and support equipment. 1.2.2 This guide is intended to be applicable to eq......

Standard Guide for Viewing Systems for Remotely Operated Facilities

ISO 9787:2013 操作型工业机器人.坐标系和运动术语

Robotsand robotic devices-Coordinate systems and motion nomenclatures

KS B ISO 10218-1:2012 机器人和机器人设备.工业机器人的安全要求.第1部分:机器人

이 표준은 산업용 로봇에 대한 본질적 안전설계, 보호수단 및 사용정보에 대한 요구사항과 지

Robots and robotic devices-Safety requirements for industrial robots-Part 1:Robots

KS B ISO 10218-2:2012 机器人和机器人设备.工业机器人的安全要求.第2部分:机械系统和集成

이 표준은 KS B ISO 10218-1에서 정의되어 있는 산업용 로봇 및 로봇 시스템 통

Robots and robotic devices-Safety requirements for industrial robots-Part 2:Robot systems and integration

ISO 8373:2012 机器人与机器人装置.词汇表

Robots and robotic devices - Vocabulary

DIN EN ISO 10218-1:2012 机器人和机器人设备.工业机器人安全要求.第1部分:机器人(ISO 10218-1:2011);德文版 EN ISO 10218-1:2011

Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011); German version EN ISO 10218-1:2011

ANSI/RIA R15.06-2012 工业用机器人和机器人系统.安全性要求

Industrial Robots and Robot Systems - Safety Requirements

KS B 7301-2011 服务机器人自主性指数

이 표준은 일반 가정 및 공공장소 등에서 여러 가지 목적의 서비스를 제공하는 서비스 로봇의

Degree of autonomy for service robot

KS B 7086-2011 工业机器人.模块设计通则

이 표준은 산업용 로봇(이하 로봇이라 한다.)의 모듈화 설계에 관한 기본적 사항에 대하여

General code of design for modularization of industrial robots

KS B 7096-2011 工业机器人.电子装置

이 표준은 다음 사항을 달성할 것을 목적으로 하여 전원 전압 교류 600 V 이하, 전원

Industrial robots-Electrical equipment

KS B 6934-2011 家用清洁机器人性能测试方法

이 표준은 일반 가정 및 사무실 등 이와 유사한 목적에 사용되는 가정용 청소 로봇에 적용한

Methods of measuring the performance of household cleaning robots

KS B ISO 9409-2:2011 操纵工业机器人.机械接口.第2部分:轴

이 표준은 원통형 돌기를 가진 샤프트형 메커니컬 인터페이스(이하, 메커니컬 인터페이스라고

Manipulating industrial robots-Mechanical interfaces-Part 2:Shafts

KS B ISO TR 13309:2011 手动工业机器人.根据ISO 9283、操纵工业机器人的性能评定的计量法和试验设备的信息指南

이 표준은 시험 장비 작동 원칙의 기술 수준 정보를 제공한다. 이 범위를 넘어선 정보는 K

Manipulating industrial robots-Informative guide on test equipment and metrology methods of operation for robot performance evaluation in accordance with KS B ISO 9283

KS B 7097-2011 工业机器人.SLIM编程语言

이 표준은 주로 조립 작업에 사용하는 각종 산업용 로봇(이하 로봇이라 한다.) 사이에서의

Industrial robots-Programming language SLIM

KS B ISO 9409-1:2011 操作工业机器人.机械接口.第1部分:板

이 표준은 원형 플랜지형 메커니컬 인터페이스(이하 메커니컬 인터페이스라고 한다.)의 주요

Manipulating industrial robots-Mechanical interfaces-Part 1:Plates

KS B 7084-2011 工业机器人.操作装置的功能识别符号和识别颜色

이 표준은 산업용 로봇(이하 로봇이라 한다.)의 조작 장치 등의 조작버튼, 표시등 등에 사

Identification symbols and colours for operator controls for industrial robots

KS B ISO 9283:2011 工业用机械手机器人.性能项目及试验方法

이 표준은 다음의 산업용 로봇의 성능 특성을 규정하고 시험하는 방법을 설명한다.―

Manipulating industrial robots-Performance criteria and related test methods

KS B 7300-2011 机器人高精密减速机性能测试方法

이 표준은 로봇용 고정밀 감속기의 성능에 관한 시험방법에 대하여 규정한다.

Test method of high precision reducer for robot

NF M62-204-3*NF ISO 17874-3:2011 放射性物质用遥控装卸设备.第3部分:电气主从操纵器

Remote handling devices for radioactive materials - Part 3 : electrical master-slave manipulators.

BS EN ISO 10218-1:2011 机器人和机器人装置.工业机器人的安全要求.机器人

Robots and robotic devices. Safety requirements for industrial robots. Robots