共找到 952 条与 加工专用设备 相关的标准,共 64 页
1.1 本标准规定了内圆切片机的术语、技术要求、试验方法、检验规则、包装储运等。 1.2 本标准适用于立式、卧式内圆切片机。其他类型的切片机可参照使用。
Generic specification of wafer slicer
本标准规定了测试掩模对准曝光机的一般要求和方法。 本标准适用于接触式和接触一接近式曝光机。
Test methods of mask alignment and exposure system
本标准规定了全自动金丝球焊接机的使用性能、制造和包装储运等质量要求、试验方法和检验规则。 本标准适用于焊接塑封集成电路和分立器件等内引线的金丝球焊机。 本标准不适用于其他用途的焊接机。
Specifications for fully automatic gold wire ball bonder
本标准规定了F-250/1400型立式涡轮分子泵的产品分类、技术参数、技术要求、试验方法、检验规则和标志、包装、运输、贮存等要求。 本标准适用于F-250/1400型立式涡轮分子泵。
Upright molecular pump with turbine for Type F-250/1400
本标准规定了L2116I型双位氢气炉的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存等要求。 本标准适用于L2116 I型双位氢气炉。
Dibit furnace for Type L2116Ⅱ
本标准规定了电子产品用氢气电阻炉的技术要求、检验规则、标志、包装、贮运等。 本标准适用于供电子产品用的零部件、材料进行退火、去气、烧结、被覆、钎焊和表面净化等工艺需要的氢气炉。
Generic specification for hydrogen electric resistance furnace for use in electronic equipment
Test methods for hydrogen electric resistance furnace for electronic equipment
本标准规定了电子产品用真空电阻炉的技术要求、检验规则、标志、包装、贮运等。 本标准适用于供电子产品用的零件、部件、材料进行焊接、去气、退火、烧结等工艺需要的真空炉。 本标准不适用于扩散炉、单晶炉等专用真空炉。
Generic specification for vacuum electric resistance furnace for use in electronic equipment
本标准规定了电子产品用真空电阻炉测试的一般要求和试验方法。 本标准适用于供电子产品用的零部件、材料进行焊接、去气、退火、烧结等工艺需要的真空炉。 本标准不适用于扩散炉、单晶炉等专用真空炉。
Test methods for vacuum electric resistance furnace for use in electronic equipment
本标准规定了L1316 I型真空去气热处理炉的结构型式、技术参数、技术要求、试验方法、检验规则及标志、包装、运输、贮存等要求。 本标准适用于供钽、铌等材料去气、退火、烧结等工艺用的L1316I型真空去气热处理炉。
Vacuum heat treating furnace with air out for type L1316Ⅱ
本标准规定了半寻体集成电路制造工序主要生产设备的有关术语及定义。 本标准适用于半导体集成电路制造工序主要生产设备的研究、生产、使用、检验、教学和技术交流。
Terms Relating to Main Equipment for Integrated Circuit Technologies
Pliers and nippers for electronics; single-purpose nippers; cutting nippers
This International. Standard specifies the principal dimensions of single-purpose pliers for electronics for gripping and manipulating. The test methods for checking their proper functioning are given in ISO 9656. The general technical requirements are given in ISO 9657. The pliers illustrated in this International Standard are only examples and are not intended to affect the manufacturer's design.
Pliers and nippers for electronics; single-purpose pliers; pliers for gripping and manipulating
Pliers and nippers for electronics; general technical requirements
Types and basic parameters of upright molecular pump with turbine
本标准规定了组合冲模对该零件的详细要求
Combined dies--Stripping bushes
本标准规定了组合冲模对该零件的详细要求
Combined dies--Press stripper plate (square)
本标准规定了组合冲模对该零件的详细要求
Combined dies--Rectangular bed plate
本标准规定了组合冲模对该零件的详细要求
Combined dies--Stripper plate
Combined dies--Retainer plate for stripping
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号