Q27 粘结材料 标准查询与下载

GOST R 56387-2015 瓷砖用干混水泥基粘合剂. 规格

Dry-mix cement based adhesives for tiles. Specifications

JG/T 465-2014 建筑光伏夹层玻璃用封边保护剂

本标准规定了建筑光伏夹层玻璃用封边保护剂的术语和定义、分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于建筑光伏夹层玻璃用封边保护材料,也适用于建筑夹层玻璃用封边保护材料。

Edge protection materials for solar photovoltaic laminated glass for building

EN 16556:2014 非结构应用的热塑性木材粘合剂最大开放时间的测定

This European Standard defines the test method for the determination of the maximum open time for thermoplastic wood adhesives for non-structural applications by tensile shear strength. It is carried out on standardized test pieces glued with increasing open times.

Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications

DIN EN 12945:2014 石灰材料.中和值的测定.滴定法

Liming materials - Determination of neutralizing value - Titrimetric methods; German version EN 12945:2014

EN 13963:2014 石膏抹灰板用填缝材料.定义,要求和试验方法

The European Standard specifies the requirements for jointing compounds and paper tapes used to fill and finish the joints formed at the edges and ends of gypsum plasterboards complying with EN 520, products from secondary processing complying with EN 14190, prefabricated gypsum plasterboard panels with a cellular paperboard core complying with EN 13915, thermal/acoustic composite panels complying with EN 13950, preformed plasterboard cornices complying with EN 14209 and gypsum boards with fibrous reinforcement complying with EN 15283-1 and EN 15283-2. This European Standard does not cover tapes which are made from materials other than paper. This European Standard covers the following characteristics: reaction to fire and flexural strength, to be measured according to the relevant test methods in this document.

Jointing materials for gypsum boards - Definitions, requirements and test methods

DB35/T 426-2014 硬聚氯乙烯（PVC-U）塑料管道系统用 溶剂型胶粘剂

本标准规定了硬聚氯乙烯树脂（PVC-U）塑料管道系统用溶剂型胶粘剂的产品分类、要求、试验方法、检验规则、标志、包装、使用说明、运输和贮存。 本标准适用于以聚氯乙烯树脂（PVC）为主要原料，加入适量的溶剂和必要的添加剂，经混合制成的硬聚氯乙烯（PVC-U）塑料管道系统用溶剂型胶粘剂（以下简称“胶粘剂”）。

Solvent-based adhesive for rigid polyvinyl chloride (PVC-U) plastic piping systems

ISO 13007-1:2014 瓷砖.灰浆和胶粘剂.第1部分:胶粘剂的术语,定义和规范

This part of ISO 13007 applies to ceramic tile adhesives for internal and external tile installations on walls and floors. This part of ISO 13007 gives the terminology, concerning the products, working methods, application properties, etc., for ceramic tile adhesives This part of ISO 13007 specifies the values of performance requirements for all ceramic tile adhesives [cementitious (C), dispersion (D) and reaction resin (R) adhesives]. This part of ISO 13007 does not contain criteria or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can also be used for other types of tiles (natural and agglomerated stones, etc.), where these do not adversely affect the materials.

Ceramic tiles - Grouts and adhesives - Part 1: Terms, definitions and specifications for adhesives

KS L 9700-2014 石膏和石灰领域的标准用语

이 표준은 석고 및 석회 산업에서 사용되는 용어에 대하여 규정한다.

Glossary of terms related to gypsum and lime

ISO 13007-2:2013 瓷砖.水泥浆和粘合剂.第2部分:粘合剂试验方法

This part of ISO 13007 describes the methods for determining the characteristics for adhesives used in the installation of ceramic tiles. The following test methods are described: — determination of open time (4.1); — determination of slip (4.2); — determination of shear adhesion strength (4.3); — determination of tensile adhesion strength (4.4); — determination of transverse deformation (4.5).

Ceramic tiles.Grouts and adhesives.Part 2: Test methods for adhesives

ISO 13007-4:2013 瓷砖.灰浆和胶粘剂.第4部分:灰浆试验方法

This part of ISO 13007 describes methods for determining characteristics for grouts used in the installation of ceramic tiles. The following test methods are described: — determination of flexural and compressive strength (4.1); — determination of water absorption (4.2); — determination of shrinkage (4.3); — determination of resistance to abrasion (4.4); — determination of transverse deformation (4.5); — determination of chemical resistance (4.6).

Ceramic tiles.Grouts and adhesives.Part 4: Test methods for grouts

DIN EN 14227-2:2013 液压粘结混合物. 规范. 第2部分: 炉渣粘结颗粒混合物; 德文版本EN 14227-2-2013

Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures; German version EN 14227-2:2013

DIN EN 13808:2013 沥青和沥青粘结剂.阳离子沥青乳液的规定框架.德文版本EN 13808-2013

Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions; German version EN 13808:2013

DIN EN 12004:2013 瓷砖用粘合剂.要求、一致性评估、分类和名称.德文版本EN 12004-2007+A1-2012

Adhesives for tiles - Requirements, evaluation of conformity, classification and designation; German version EN 12004:2007+A1:2012

DIN EN 302-5:2013 承重结构用粘合剂.试验方法.第5部分:基准条件下最大组合时间的测定.德文版本EN 302-5-2013

Adhesives for load-bearing structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions; German version EN 302-5:2013

DIN EN 302-2:2013 承重木结构件用粘合剂.试验方法.第2部分:耐剥离性的测定.德文版本EN 302-2-2013

Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination; German version EN 302-2:2013

BS EN 13242:2013 土木工程作业和道路建设中使用的非粘结和液压粘结材料集料

Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction

BS EN 14227-5:2013 液力粘结混合料.规格.液力道路粘结混合料

Hydraulically bound mixtures. Specifications. Hydraulic road binder bound granular mixtures

BS EN 302-4:2013 承重木结构用胶粘剂.试验方法.木材收缩对剪切强度影响的测定

Adhesives for load-bearing timber structures. Test methods. Determination of the effects of wood shrinkage on the shear strength

BS EN 302-1:2013 承重木结构用胶粘剂.试验方法.纵向抗拉伸剪切强度的测定

Adhesives for load-bearing timber structures. Test methods. Determination of longitudinal tensile shear strength

BS EN 302-7:2013 承重木结构用胶粘剂.试验方法.标准条件下使用寿命的测定

Adhesives for load-bearing timber structures. Test methods. Determination of the working life under referenced conditions