Q27 粘结材料 标准查询与下载
共找到 505 条与 粘结材料 相关的标准，共 34 页
이 표준은 도자기질 타일의 시공에 사용되는 접착제에 대한 특성을 측정하는 방법에 대하여 규
Ceramic tiles－Grouts and adhesives－Part 2：Test methods for adhesives
- ICS
- 83.180;91.100.23
- CCS
- Q27
- 发布
- 2011-10-28
- 实施
- 2011-10-28
이 표준은 벽과 복도의 내부 및 외부 타일 설치를 위한 도자기 타일 그라우트에 적용된다.
Ceramic tiles－Grouts and adhesives－Part 3：Terms, definitions and specifications for grouts
- ICS
- 91.100.10;91.100.23
- CCS
- Q27
- 发布
- 2011-10-28
- 实施
- 2011-10-28
This European Standard specifies a procedure for determining the watertightness of polymer modified bituminous thick coatings for waterproofing (i.e. the resistance to hydraulic pressure).
Polymer modified bituminous thick coatings for waterproofing. Determination of watertightness
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2011-07-31
- 实施
- 2011-07-31
This European standard describes a method to determine the ability of a liquid adhesive to corrode a copper substrate under heat ageing conditions. Temperatures and ageing periods are chosen to ensure the maximum differentiation between the corrosivity of different adhesives and are not intended to represent any particular service condition.
Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate; German version EN 1965-1:2011
- ICS
- 77.060;83.180
- CCS
- Q27
- 发布
- 2011-07
- 实施
This European Standard specifies the scheme for the evaluation of conformity of building lime to their corresponding product standard EN 459-1. It provides rules for surveillance, assessment and acceptance of the factory production control and rules for the frequency of inspections. The European Standard specifies technical rules for factory production control by the manufacturer, including autocontrol testing of samples. It also provides rules for actions to be followed in the event of non-conformity and requirements for dispatching centres.
Building lime. Conformity evaluation
- ICS
- 91.100.10
- CCS
- Q27
- 发布
- 2011-06-30
- 实施
- 2011-06-30
Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test.
- ICS
- 75.140;91.100.50
- CCS
- Q27
- 发布
- 2011-06-01
- 实施
- 2011-06-11
This European Standard specifies a procedure for determining the dimensional stability at a high temperature of polymer modified bituminous thick coating for waterproofing.
Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature; German version EN 15818:2011
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2011-06
- 实施
This European Standard specifies a procedure for determining the watertightness of polymer modified bituminous thick coatings for waterproofing (i.e. the resistance to hydraulic pressure).
Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness; German version EN 15820:2011
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2011-06
- 实施
This European Standard specifies a procedure for determining the reduction in the thickness of polymer modified bituminous thick coatings due to drying for waterproofing.
Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried; German version EN 15819:2011
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2011-06
- 实施
This European Standard specifies two methods (methods A and methods B) for determining the crack bridge properties of polymer modified bituminous thick coatings for waterproofing.The two test methods may be applied equally.
Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability; German version EN 15812:2011
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2011-06
- 实施
This European Standard specifies a method for the recovery of binder from a bituminous emulsion or from a cut-back or fluxed bitumen after conditioning at ambient temperature for 24 h followed by 24 h at 50 °C, in such a way that will enable further testing with minimum changes of the binder characteristics. It applies to all types of bituminous emulsions, modified with polymers or non-modified, as well as to all types of cut-back and fluxed bitumens, both modified with polymers and non-modified. For cut-back and fluxed bituminous binders, this test method is only an intermediate step and should be followed by the stabilisation procedure specified by EN 13074-2. Direct testing of the recovered binder is however used to evaluate the setting ability of fluxed bituminous binders made with vegetal fluxes. NOTE The recovered binder is not necessarily identical to the initial binder. WARNING — The use of this document may involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. The hazards associated with the use of this method have been assessed using cut-back bitumen containing 10 % kerosene and 90 % 160/220 penetration grade bitumen and were found low enough to be acceptable. However it is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders. Recovery by evaporation
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2011-05-31
- 实施
- 2011-05-31
This European Standard specifies a method for the determination of the efflux time at 40 °C of bituminous emulsions in seconds using an efflux viscometer. Alternative test temperature is 50 °C. NOTE The procedure described in this standard may also be followed to determine efflux time at other temperatures such as for instance 25 °C. WARNING — The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen and bituminous binders. Determination of efflux time by the efflux viscometer. Bituminous emulsions
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2011-05-31
- 实施
- 2011-05-31
This European Standard specifies a method for the determination of the efflux time at 25 °C of petroleum cutback and fluxed bituminous binders in seconds using an efflux viscometer. Alternative test temperatures are 40 °C, 50 °C and 60 °C. WARNING — The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen and bituminous binders. Determination of efflux time by the efflux viscometer. Cut-back and fluxed bituminous binders
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2011-05-31
- 实施
- 2011-05-31
This European Standard specifies a method for the determination of the efflux time at 25 °C of petroleum cutback and fluxed bituminous binders in seconds using an efflux viscometer. Alternative test temperatures are 40 °C, 50 °C and 60 °C. WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders; German version EN 12846-2:2011
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2011-05
- 实施
This European Standard specifies a method for the stabilisation at 85 °C for 24 h of a binder after recovery from a bituminous emulsion or from a cut-back or fluxed bitumen for further testing. It applies to all types of bituminous emulsions, modified with polymers or non-modified, and as well as to all types of cut-back and fluxed bitumens, both modified with polymers and non-modified. The recovery test method is specified in EN 13074-1. WARNING - The use of this document may involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. The hazards associated with the use of this method have been assessed using cut-back bitumen containing 10 % kerosene and 90 % 160/220 penetration grade bitumen and were found low enough to be acceptable. However it is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilisation after recovery by evaporation; German version EN 13074-2:2011
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2011-05
- 实施
This European Standard specifies a method for the determination of the efflux time at 40 °C of bituminous emulsions in seconds using an efflux viscometer. Alternative test temperature is 50 °C. NOTE The procedure described in this standard may also be followed to determine efflux time at other temperatures such as for instance 25 °C. WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions; German version EN 12846-1:2011
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2011-05
- 实施
This European Standard specifies a method for determining the adhesion of a bituminous emulsion coated onto aggregate when immersed in water. The method considers two different aspects of adhesivity, i.e. immediate adhesivity and water effect on binder adhesion. The method may be used with a reference aggregate. In that case, it measures the intrinsic adhesion behaviour of a bituminous emulsion. The method may also be used with a specific aggregate as used on a job site. WARNING — The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen and bituminous binders. Determination of adhesivity of bituminous emulsions by water immersion test
- ICS
- 75.140;91.100.50
- CCS
- Q27
- 发布
- 2011-04-30
- 实施
- 2011-04-30
Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2 : cut-back and fluxed bituminous binders.
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2011-04-01
- 实施
- 2011-04-23
Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bitumous binders - Part 1 : recovery by evaporation.
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2011-04-01
- 实施
- 2011-04-16
