Q27 粘结材料 标准查询与下载

DIN EN 13702:2010 沥青和沥青粘合剂.锥板式方法测定改性沥青动态粘度.德文版本EN 13702-2010

Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen by cone and plate method; German version EN 13702:2010

DIN EN 15368:2010 非结构材料用水硬性粘合料.定义,规范和合格标准.德文版本EN 15368-2008+A1-2010

Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria; German version EN 15368:2008+A1:2010

BS ISO 13007-1:2010 瓷砖.灰浆和胶粘剂.胶粘剂的术语,定义和规范

Ceramic tiles. Grouts and adhesives. Terms, definitions and specifications for adhesives

BS ISO 13007-3:2010 瓷砖.灰浆和胶粘剂.第3部分:灰浆的术语,定义和规范

Ceramic tiles. Grouts and adhesives. Terms, definitions and specifications for grouts

BS ISO 13007-2:2010 瓷砖.水泥浆和粘合剂.粘合剂的试验方法

Ceramic tiles. Grouts and adhesives. Test methods for adhesives

ISO 13007-1:2010 瓷砖.灰浆和胶粘剂.第1部分:胶粘剂的术语,定义和规范

This part of ISO 13007 defines terms concerning the products, working methods and application properties for ceramic tile adhesives. It specifies values of performance requirements for all ceramic tile adhesives [cementitious (C), dispersion (D) and reaction resin (R) adhesives]. This part of ISO 13007 is applicable to ceramic tile adhesives for internal and external tile installations on walls and floors. It is not applicable to criteria or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can also be used for other types of tiles (natural and agglomerated stones, etc.), where these do not adversely affect the materials.

Ceramic tiles - Grouts and adhesives - Part 1: Terms, definitions and specifications for adhesives

ISO 13007-4:2010 瓷砖.灰浆和胶粘剂.第4部分:灰浆试验方法

This part of ISO 13007 describes methods for determining characteristics of grouts used in the installation of ceramic tiles. The test methods described are the following: a) determination of flexural and compressive strength; b) determination of water absorption; c) determination of shrinkage; d) determination of resistance to abrasion; e) determination of transverse deformation; f) determination of chemical resistance.

Ceramic tiles - Grouts and adhesives - Part 4: Test methods for grouts

ISO 13007-2:2010 瓷砖.水泥浆和粘合剂.第2部分:粘合剂试验方法

This part of ISO 13007 describes methods for determining characteristics for adhesives used in the installation of ceramic tiles. The test methods described are the following: a) determination of open time; b) determination of slip; c) determination of shear adhesion strength; d) determination of tensile adhesion strength; e) determination of transverse deformation; f) determination of chemical resistance.

Ceramic tiles - Grouts and adhesives - Part 2: Test methods for adhesives

JIS A 6904 ERRATUM 1:2010 勘误表

ERRATUM

NF P15-340/IN1*NF EN 15368/IN1:2010 非结构性应用件用液压粘合计.定义,规范和合格标准

Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria.

KS F 3213-2010 墙板用粘合剂

이 표준은 벽면에 보드류1)를 부착하는 경우에 사용하는 접착제(이하 접착제라 한다.)에 대

Adhesives for wall boards

EN 15368:2008+A1:2010 非结构性应用液压粘合剂.定义,规范和合格标准

This European Standard applies to Hydraulic binder for non-structural applications in construction used as binder for preparation of mortar for masonry, rendering and plastering and other non structural construction products. This European Standard specifies the definition and composition of Hydraulic binder for non-structural applications (HB). It includes physical, mechanical and chemical requirements and defines strength classes. EN 15368 also states the conformity criteria and the related rules. Necessary durability requirements are also given. NOTE For normal applications the information given in this standard, and in the masonry specifications, EN 998-1 and EN 998-2, is generally sufficient. However, in special cases, an exchange of additional information between the producer and user can be helpful. The details of such an exchange are not within the scope of this standard but should be dealt with in accordance with national standards or other regulations or can be agreed between the parties concerned. Terms of delivery or other contractual conditions, normally included in documents exchanged between the supplier and the purchaser of Hydraulic binder for non-structural applications, are outside the scope of this European Standard.

Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria

SN/T 2553-2010 进出口建筑用胶中苯、甲苯、二甲苯、游离甲苯二异氰酸酯及邻苯二甲酸酯类增塑剂的测定

本标准的方法一规定了进出口建筑用胶中苯、甲苯、二甲苯、游离甲苯二异氰酸酯(TDI)的气相色谱质谱测定方法，方法二规定了进出口建筑用胶中苯、甲苯、二甲苯、游离甲苯二异氰酸酯(TDI)的气相色谱-氢火焰离子化检测器测定方法，方法三规定了进出口建筑中苯、甲苯、二甲苯、邻苯二甲酸二异丁酯(DIBP)、邻苯二甲酸二丁酯(DBP)、邻苯二甲酸丁基苄基酯(BBP)、邻苯二甲酸二（2-乙基己基）酯(DEHP)、邻苯二甲酸二正辛酯(DNOP)的气相色谱质谱测定方法，方法四规定了进出口建筑用胶中苯、甲苯、二甲苯、邻苯二甲酸二异丁酯(DIBP)、邻苯二甲酸二丁酯(DBP)、邻苯二甲酸丁基苄基酯(BBP)、邻苯二甲酸二（2-乙基己基）酯(DEHP)、邻苯二甲酸二正辛酯(DNOP)的气相色谱测定方法,方法五规定了进出口建筑用胶中苯、甲苯、二甲苯、邻苯二甲酸二异丁酯(DIBP)、邻苯二甲酸二丁酯(DBP)、邻苯二甲酸丁基苄基酯(BBP)、邻苯二甲酸二（2-乙基己基）酯(DEHP)、邻苯二甲酸二正辛酯(DNOP)的高效液相色谱测定方法。 本标准的方法一、方法二适用于进出口建筑用胶中苯、甲苯、二甲苯、游离甲苯二异氰酸酯的测定，方法三、方法四、方法五适用于进出口建筑用胶中苯、甲苯、二甲苯、DIBP、DBP、BBP、DEHP、DNOP的测定。

Determination of benzene,toluene,xylene isomers,free toluene diisocynate and phthalate plasticizers in adhesives used in building for import and export

SN/T 2554-2010 进出口建筑用胶中游离甲醛含量的测定

本标准的方法一规定了进出口建筑用胶中游离甲醛的高效液相色谱测定方法，方法二规定了进出口建筑用胶中游离甲醛的气相色谱测定方法。 本标准适用于进出口建筑用胶中游离甲醛的测定。

Determination of free formaldehyde in adhesives used in building for import and export

DIN SPEC 1026:2010 沥青和沥青粘合剂 用切口试样上三点弯曲试验对断裂韧性温度的测定 德文版本CEN/TS 15963-2010

Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2010

JG/T 271-2010 粘钢加固用建筑结构胶

本标准规定了粘钢加固用建筑结构胶(简称粘钢胶)的术语和定义、分类、和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于对混凝土结构进行粘钢加固的建筑结构胶。

Structural adhesives for strengthening structures with steel plate

JIS A 6922 AMD 1:2010 装修和装饰用壁纸和墙面涂料粘合剂(修改件1)

Adhesives for wallpaper and wallcoverings for decorative finish and TATEGU (Amendment 1)

DIN EN 14891 Berichtigung 2:2010 胶黏剂粘合的瓷砖下部用液体的防水渗透产品.要求、试验方法、合格性评定、分类和标记.技术勘误DIN EN 14891-2007-11

This European Standard applies to all liquid-applied water impermeable products, based on polymer modified cementitious mortars, dispersions and reaction resin coatings, used beneath ceramic tiling, for internal and external tile installations on walls and floors. This European Standard gives the terminology concerning the products and specifies the test methods and the values of performance requirements for liquid applied water impermeable products associated with tile adhesives. This European Standard specifies the evaluation of conformity and the classification and designation of liquid-applied water impermeable products beneath ceramic tiling.

Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation; German version EN 14891:2007, Corrigendum to DIN EN 14891:2007-11; Germa

BS EN 13415:2010 地板粘合剂试验.胶膜和复合材料的抗电阻性的测定

This European Standard specifies a test method to measure the electrical resistance as a material physical parameter of an adhesive film and composites of floor covering material and adhesive film. The electrical resistance is reciprocal to the electrical conductivity. This laboratory method does not take account of all influences which may occur in practice. In contrast to EN 1081, which applies to the determination of the electrical resistance of resilient floor coverings R1, R2 and R3 (see Clause 3), this method applies to the determination of the electrical resistance of adhesive films on glass and of composites of floor coverings, adhesively bonded to a fibre cement substrate R4 and R5 (see Clause 3).

Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites

ASTM D7643-10 测定性能分级(PG)沥青结合料的连续分级温度和连续分级的标准操作规程

The continuous grading temperatures and continuous grade are used for informational purposes only and are not used for the sale or purchase of asphalt binders. The continuous grading temperatures and continuous grade may be used for forensic or research studies and when producing, blending, modifying, or otherwise evaluating asphalt binders. This guide is applicable to Specification D6373, Tables 1 and 2.1.1 This practice is used to determine the continuous grading temperatures and continuous grade for an asphalt binder graded in accordance with the specification criteria specified in D6373, Standard Specification for Performance Graded Asphalt Binders. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders