Q27 粘结材料 标准查询与下载
共找到 505 条与 粘结材料 相关的标准，共 34 页
本标准规定了室内墙面轻质装饰板用免钉胶的术语和定义、分类和标记、要求、试验方法、检验规则以及标志、包装、运输和贮存等、本标准适用于室内墙面轻质装饰板、装饰性挂件及配件粘接用免钉胶、本标准不适用于长期浸水环境下使用的免钉胶、
Mastic adhesives for fixing wallboards
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2013-04-25
- 实施
- 2013-09-01
Hydraulic road binders. Rapid hardening hydraulic road binders. Composition, specifications and conformity criteria
- ICS
- 93.080.20
- CCS
- Q27
- 发布
- 2013-03-31
- 实施
- 2013-03-31
Hydraulic road binders. Conformity evaluation
- ICS
- 93.080.20
- CCS
- Q27
- 发布
- 2013-03-31
- 实施
- 2013-03-31
This European Standard defines and gives the specifications for rapid hardening hydraulic road binders, produced in a factory and supplied ready for treatment of materials for bases, sub-bases and capping layers as well as earthworks, in road, railway, airport and other types of infrastructure. It includes the mechanical, physical and chemical requirements and the classification of these binders based on their compressive strength at 7 days and 28 days. It also includes the conformity criteria and evaluation procedures to be applied by the manufacturer.
Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition@ specifications and conformity criteria
- ICS
- 93.080.20
- CCS
- Q27
- 发布
- 2013-03-01
- 实施
This European Standard specifies a method for the determination of the speed and effectiveness of the neutralising potential of calcium carbonate,calcium magnesium carbonate and calcium magnesium silicate liming materials by potentiometric titration with hydrochloric acid. This method is applicable only to liming materials with a maximum particle size of 6,3 mm. The type of liming material should be identified according to EN 14069 and the particle size should be determined according to EN 12948.
Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid; German version EN 13971:2012
- ICS
- 65.080
- CCS
- Q27
- 发布
- 2013-03
- 实施
4.1 The following practices are to be used in obtaining samples that are representative of the lot being sampled. The methodology used will be dependent upon the size and type of material sampled and testing requirements. 4.2 The following practices are intended for use in obtaining samples from material that is ready for sale and are not intended as sampling procedures for quality control purposes. These practices are to be used in obtaining a laboratory sample that will yield results serving as a basis for acceptance or rejection of the lot of material sampled. This does not preclude the use of these practices for quality control purposes. 4.3 The following practices can be used to eliminate bias in sampling. The person or persons responsible for using these practices must be trained and they will be conscientious and timely in their use. 4.4 An agreement between the producer and the consumer on location of sampling, either at the producer's plant or at the destination, is encouraged. Product quality can be affected through careless handling, improper protection, and delayed shipment. It is preferable to sample at the point of loading. The consumer has the right to witness the sampling practices being used. 4.5 This practice may be used to provide a representative sample of lime or limestone products. Due to the variability of limestone and lime and the wide variety of sampling equipment, caution must be exercised in all stages of sampling, from system specification and equipment procurement to equipment acceptance testing and actually taking the final sample. 1.1 This practice covers procedures for the collection and reduction of samples of lime and limestone products to be used for physical and chemical tests. 1.2 This practice further covers inspection, rejection, retesting, packing, and marking of lime and limestone products as it may be used in the chemical, agricultural, and process industries. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
- ICS
- 91.100.15 (Mineral materials and products)
- CCS
- Q27
- 发布
- 2013
- 实施
本标准规定了采用电感耦合等离子体原子发射光谱(ICP-AES)法测定半导体抛光液用硅溶胶中杂质元素含量的方法。本标准适用于半导体化学机械抛光(CMP)中抛光液用的各种硅溶胶。杂质元素包括：铝、钡、钙、铬、铜、铁、钾、镁、锰、钠、镍、钛、锌、锆等14种元素。
Determination of impurities in silica sol for polishing solution in semiconductor industry.Inductively coupled plasma atomic emission spectrometric method
- ICS
- 71.040
- CCS
- Q27
- 发布
- 2012-12-28
- 实施
- 2013-06-01
Adhesives for tiles - Requirements, evaluation of conformity, classification and designation.
- ICS
- 83.180;91.100.10
- CCS
- Q27
- 发布
- 2012-09-01
- 实施
- 2012-09-01
Adhesives for tiles - Requirements, evaluation of conformity, classification and designation; German version EN 12004:2007+A1:2012
- ICS
- 83.180;91.100.10
- CCS
- Q27
- 发布
- 2012-09-01
- 实施
Bitumen and bituminous binder - Sampling bituminous binders; German version EN 58:2012
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2012-05-01
- 实施
Building lime - Part 3 : conformity evaluation.
- ICS
- 91.100.10
- CCS
- Q27
- 发布
- 2012-04-01
- 实施
- 2012-04-14
Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method; German version EN 1428:2012
- ICS
- 75.140;91.100.50
- CCS
- Q27
- 发布
- 2012-03
- 实施
Bitumen and bituminous binders. Determination of water content in bituminous emulsions. Azeotropic distillation method
- ICS
- 75.140;91.100.50
- CCS
- Q27
- 发布
- 2012-01-31
- 实施
- 2012-01-31
本标准规定了天然石材用水泥基胶粘剂的术语和定义、分类和标记、一般要求、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于建筑内外墙粘贴天然石材用水泥基胶粘剂。其他场合使用时可参照本标准。
Cementitious adhesives for natural stone
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2012-01-06
- 实施
- 2012-05-01
1.1 This specification covers silica fume for use in concrete and other systems containing hydraulic cement. 1.2 In the cases of slurried or densified silica fume, perform the tests on the raw silica fume from which these products have been made. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 The following safety hazards caveat pertains only to the test methods portions, Sections 10-19, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Read the material safety data sheets for materials used. 1.5 The text of this standard references notes and footnotes that provide explanatory information. These notes and footnotes (excluding those in tables) shall not be considered as requirements of this standard.
Standard Specification for Silica Fume Used in Cementitious Mixtures
- ICS
- 91.100.10 (Cement. Gypsum. Lime. Mortar)
- CCS
- Q27
- 发布
- 2012
- 实施
本标准规定了磷石膏中附着水、总五氧化二磷、水溶性五氧化二磷、总氟、水溶性氟含量的测定方法。 本标准适用于以磷矿石为原料，湿法制取磷酸时所得的，主要成分为二水硫酸钙（CaSO·2HO）的磷石膏。
Determination of phosphorus and fluorine content in phosphogypsum
- ICS
- 91.100.10
- CCS
- Q27
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了高分子防水卷材胶粘剂（以下简称卷材胶粘剂)的分类、一般要求、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于以合成弹性体为基料冷粘结的高分子防水卷材胶粘剂。
Adhesives for polymer waterproof sheets
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了混凝土结构工程用锚固胶的术语和定义、分类和标记、要求、试验方法、检验规则及标志、包装和贮存。 本标准适用于混凝土结构工程用锚固胶的生产、检验和使用。
Anchorage adhesive for concrete structure
- ICS
- CCS
- Q27
- 发布
- 2011-11-25
- 实施
- 2012-05-01
이 표준은 도자기질 타일의 시공에 사용되는 접착제에 대한 특성을 측정하는 방법에 대하여 규
Ceramic tiles－Grouts and adhesives－Part 2：Test methods for adhesives
- ICS
- 83.180;91.100.23
- CCS
- Q27
- 发布
- 2011-10-28
- 实施
- 2011-10-28
이 표준은 벽과 복도의 내부 및 외부 타일 설치를 위한 도자기 타일 그라우트에 적용된다.
Ceramic tiles－Grouts and adhesives－Part 3：Terms, definitions and specifications for grouts
- ICS
- 91.100.10;91.100.23
- CCS
- Q27
- 发布
- 2011-10-28
- 实施
- 2011-10-28
