R00 标准化、质量管理 标准查询与下载

AASHTO T 330-2007 碎石用亚甲蓝蒙脱石组的有害粘土的定性检测的标准试验方法

This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this procedure to establish appropriate safet

Standard Method of Test for The Qualitative Detection of Harmful Clays of the Smectite Group in Aggregates Using Methylene Blue

WB/T 1035-2006 乘用车物流质损判定及处理规范

本标准规定了乘用车在物流过程中发生或发现质损后的判定及处理规范。 本标准适用于乘用在物流过程中对质损的判定及处理。其他类型车辆的质损判定及处理可参照本标准执行。

Logistic quality damage judgments and processing specification for passenger car

AASHTO T 281-2006 陶瓷粘土管的标准测试方法

1.1. These test methods cover the equipment for, and the techniques of, testing vitrified clay pipe prior to installation. Tests using whole pipe determine the resistance to crushing and hydrostatic forces. Tests using pipe fragments measure the amount

Standard Method of Test for Vitrified Clay Pipe

AASHTO SLCW-2006 东南地方施工工厂-美国东南12州非大城市的地方施工工厂报告

Southeast Local Consultation Workshop - Report of a workshop on non-metropolitan local consultation for the 12 southeastern U.S. states

Southeast Local Consultation Workshop - Report of a workshop on non-metropolitan local consultation for the 12 southeastern U.S. states Revision 1

AASHTO T 287-2006 核方法沥青混合料沥青粘合剂含量的标准测试方法

This procedure covers the quantitative determination of the asphalt binder content of asphalt mixtures by testing a sample with a nuclear gauge that utilizes neutron-thermalization techniques.

Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method

AASHTO R 10-2006 公路施工用质量和统计有关术语定义标准推荐规范

This recommended practice is to provide standard definitions for terms used in specifications, test methods, and the various quality assurance procedures.

Standard Recommended Practice for Definition of Terms Related to Quality and Statistics As Used in Highway Construction

AASHTO T 225-2006 钻石取芯钻进设备定位勘察的标准测试方法

1.1. This method covers a procedure for diamond core drilling designing for securing intact samples of rock and some soils which are too hard to sample by soil sampling methods. This method is primarily for obtaining data for foundation and slope design a

Standard Method of Test for Diamond Core Drilling for Site Investigation

AASHTO M 291-2006 碳素钢与合金钢螺母的标准规范

Standard Specification for Carbon and Alloy Steel Nuts

Standard Specification for Carbon and Alloy Steel Nuts

AASHTO T 280-2006 混凝土管,沙井路段,或瓷砖的标准测试方法

These test methods cover testing of concrete pipe, manhole sections, and tile. The test methods described are used in production testing and acceptance testing to evaluate the properties provided for in the specifications.

Standard Method of Test for Concrete Pipe, Manhole Sections, or Tile

AASHTO CA-3-2006 美国乘车往返 III-关于乘车方式和趋势的第3份国家报告

Commuting In America III - The Third National Report On Commuting Patterns and Trends

Commuting In America III - The Third National Report On Commuting Patterns and Trends

AASHTO M 167M_M 167-2005 现场栓接管,管拱和拱用波纹镀锌结构钢板的标准规范

This specification covers corrugated steel structural plate, zinc-coated, used in the construction of pipe, pipe-arches, arches, underpasses, and special shapes for field assembly. Appropriate fasteners and accessory materials are also described. The pip

Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

AASHTO M 43-2005 道路和桥梁施工用骨料尺寸的标准规范

This specification defines aggregate size designations and ranges in mechanical analyses for standard sizes of coarse aggregate and screenings for use in the construction and maintenance of various types of highways and bridges.

Standard Specification for Sizes of Aggregate for Road and Bridge Construction

AASHTO DS-2005 设计标准洲际系统的政策第5版

The National System of Interstate and Defense Highways is the most important in the United States.

A POLICY ON DESIGN STANDARDS INTERSTATE SYSTEM Revision 5

AASHTO T 302-2005 聚合物改性乳化沥青残留物和沥青粘合剂聚合物含量的标准测试方法

This test method is used to determine the percent concentration of a Styrene-Butadiene-Rubber (SBR), Styrene-Butadiene (SB), or Styrene-Butadiene-Styrene (SBS) polymer in a polymermodified asphalt binder or emulsified asphalt residue. By using the infra

Standard Method of Test for Polymer Content of Polymer-Modified Emulsified Asphalt Residue and Asphalt Binders

AASHTO T 326-2005 粗骨料异常无效的内容的标准试验方法

This method describes the determination of the loose uncompacted void content of a sample of

Standard Method of Test for Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle Shape, Surface Texture, and Grading)

AASHTO T 308-2005 烧热法下抗压热拌沥青的含量的测定的标准试验方法

This test method covers the determination of asphalt binder content of hot-mix asphalt (HMA) mixtures by ignition at temperatures that reach the flashpoint of the binder in a furnace. The means of sample heating may be the convection method or the direc

Standard Method of Test for Determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) by the Ignition Method

AASHTO T 237-2005 碳纤维环氧树脂预浸渍中树脂固定含量的标准测试方法

1.1. The methods given cover the examination of epoxy resin adhesives for use in bonding traffic markers to pavements, cured concrete to cured concrete, fresh concrete to cured concrete, and are divided into two parts:

Standard Method of Test for Testing Epoxy Resin Adhesive

AASHTO T 250-2005 路标漆进行路面使用的标准测试方法

The procedures used for testing thermoplastic traffic line material are described in this method. This includes the method for obtaining a representative test sample, preparation of the test specimens, and performing the specified tests. The material i

Standard Method of Test for Thermoplastic Traffic Line Material

AASHTO R 9-2005 公路施工可接受抽样计划标准推荐规程

Definition of Acceptance Plan—An agreed upon method of taking samples and making measurements or observations on these samples for the purpose of evaluating the acceptability of a lot of material or construction (Transportation Research Circular Number E

Standard Recommended Practice for Acceptance Sampling Plans for Highway Construction

AASHTO T 325-2004 由三者测试在交通建设估算混凝土强度的标准试验方法

This standard provides procedures for estimating concrete strength in roads, bridges, and other transportation structures through the use of a maturity index.

Standard Method of Test for Estimating the Strength of Concrete in Transportation Construction by Maturity Tests