R00 标准化、质量管理 标准查询与下载

AASHTO M 55M_M 55-2007 钢筋混凝土用焊接螺纹钢条网标准试验方法

This specification covers welded wire reinforcement to be used for the reinforcement of concrete.

Standard Method of Test for Steel Welded Wire Reinforcement, Plain, for Concrete

AASHTO MP 16-2007 用作粗骨料的再生混凝土骨料在液压水泥混凝土的标准规范

This specification covers coarse aggregate derived from reclaimed concrete for use in hydraulic cement concrete. The specification is not intended for use when lightweight, high-density, or other specialty concrete applications are required. When aggre

Standard Specification for Reclaimed Concrete Aggregate for Use as Coarse Aggregate in Hydraulic Cement Concrete

AASHTO M 133-2007 木材防腐和压力处理的标准规范

Standard Specification for Preservatives and Pressure Treatment Processes for Timber

Standard Specification for Preservatives and Pressure Treatment Processes for Timber

AASHTO T 321-2007 压实沥青混合料受到反复弯曲疲劳寿命的标准试验方法

This standard provides procedures for determining the fatigue life and fatigue energy of 380 mm long by 50 mm thick by 63 mm wide hot-mix asphalt (HMA) beam specimens sawed from laboratory or field compacted HMA and subjected to repeated flexural bendi

Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (HMA) Subjected to Repeated Flexural Bending

AASHTO TP 71-2007 用模拟加载评估旋转压实仪内部角度(SGC)的标准试验方法

This practice covers the procedure for the evaluation of the Superpave Gyratory Compactor (SGC) internal angle of gyration using an instrument capable of simulating loading conditions similar to those created by a hot-mix asphalt (HMA) specimen.

Standard Method of Test for Evaluation of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

AASHTO TP 70-2007 用动态剪切流变仪测试的沥青粘合剂(MSCR)的标准试验方法

This practice covers the identification of elastomeric response of modified asphalt binders by means of percent recovery obtained in the Multiple Stress Creep Recovery (MSCR) test. The MSCR test is conducted using the Dynamic Shear Rheometer (DSR) at th

Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)

AASHTO M 176M_M 176-2007 多孔混凝土管(米制)的标准规范

This specification covers porous nonreinforced concrete pipe for use in underdrains.

Standard Specification for Porous Concrete Pipe [Superseded: ASTM C 654 REV A, ASTM C 654, ASTM C 654, ASTM C 654, ASTM C 654, ASTM C 654, ASTM C 654, ASTM C 654, ASTM C 654]

AASHTO M 170-2007 钢筋混凝土制涵管,雨水管和污水管的标准规范

This specification covers three strength grades of finely ground granulated blast-furnace slag for use as a cementitious material in concrete and mortar.

Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

AASHTO HDG CHAPTER 3-2007 告诉路施工中腐蚀和沉积的控制

Soil erosion is a natural process whereby soil particles are dislodged by rainfall and carried away by runoff. The removal rate of the soil particles is proportional to the intensity and duration of the rainfall, the volume and characteristics of the wa

EROSION AND SEDIMENT CONTROL IN HIGHWAY CONSTRUCTION 4th edition

AASHTO T 314-2007 直接拉伸(DT)试验中沥青粘合剂断裂特性测定的标准试验方法

This test method covers the determination of the failure strain and failure stress of asphalt binders by means of a direct tension test. It can be used with unaged or aged material using T 240 (RTFOT), R 28 (PAV). The test apparatus is designed for test

Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)

AASHTO TP 62-2007 热拌沥青混凝土的系数测定的标准试验方法

This test method covers procedures for preparing and testing hot-mix asphalt (HMA) to determine the dynamic modulus and phase angle over a range of temperatures and loading frequencies.

Standard Method of Test for Determining Dynamic Modulus of Hot-Mix Asphalt (HMA)

AASHTO T 330-2007 碎石用亚甲蓝蒙脱石组的有害粘土的定性检测的标准试验方法

This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this procedure to establish appropriate safet

Standard Method of Test for The Qualitative Detection of Harmful Clays of the Smectite Group in Aggregates Using Methylene Blue

AASHTO T 295-2007 液体比重法下液体沥青的API比重或具体比重的标准测试方法

This specification covers coal fly ash and raw or calcined natural pozzolan for use in concrete where cementitious or pozzolanic action, or both, is desired, or where other properties normally attributed to finely divided coal fly ash and raw or calcine

Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method

AASHTO R 44-2007 规范特殊项目的标准办法

Independent Assurance (IA)—IA is used in industry as an internal audit and review to support the accuracy of data and processes. In the highway industry it is the outgrowth of a report from the Congressional House Committee on Oversights and Investigati

Standard Practice for Independent Assurance (IA) Programs

AASHTO M 306-2007 排水管,污水管和相关铸件的标准规范

This specification is applicable to frames, grates, rings, and covers for inlets, manholes, and other structures for civil engineering use where items may be placed in traffic service and load bearing is a consideration.

Standard Specification for Drainage, Sewer, Utility, and Related Castings

AASHTO M 163M_M 163-2007 一般用途铁铬,铁铬镍耐腐蚀铸件的标准规范

This specification covers iron-chromium and iron-chromium-nickel alloy castings for general corrosion-resistant application. The grades covered by this specification represent types of alloy castings suitable for broad ranges of application, which are i

Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

AASHTO HM-27 PT I-2007 运输材料和抽样及试验方法的标准规范.第1部分:规格第27版. 包括第2A和第2B部分目录

Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part I: Specifications 27th Edition; Includes Part IA and Part IB

Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part I: Specifications 27th Edition; Includes Part IA and Part IB

AASHTO M 323-2007 高性能沥青路面混合料体积的标准规范

This specification for Superpave volumetric mix design uses aggregate and mixture properties to produce a hot-mix asphalt (HMA) job-mix formula.

Standard Specification for Superpave Volumetric Mix Design

AASHTO MP 8-2007 沥青玛蹄脂碎石混合料设计的标准规范

This specification covers the design of Stone Matrix Asphalt (SMA) using the Superpave Gyratory Compactor (SGC). The SMA design is based on the volumetric properties of the SMA in terms of air voids (Va), the voids in mineral aggregate (VMA), and the pr

Standard Specification for Stone Matrix Asphalt (SMA)

AASHTO T 275-2007 用石蜡封盖样本的紧密HMA的堆积比重和密度的标准试验方法

This method of test covers the determination of bulk specific gravity of specimens of compacted hot mix asphalt (HMA).

Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens