S30 机车车辆通用标准综合 标准查询与下载

NF F01-227:2008 轨道交通.铁路车辆车身防撞性要求

Railway applications - Crashworthiness requirements for railway vehicles bodies.

DIN EN 15085-3:2008 轨道交通.铁路车辆和组件的焊接.第3部分:设计要求.德文版本DIN EN 15085-3-2008

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts. This part of the series specifies design and classification rules applicable to the manufacture and maintenance of railway vehicles and their parts. Upon agreement with the customer, drawings issued prior to this European Standard may be subject to the provisions of this European Standard. This European Standard does not define parameters for the dimensioning (refer to other standards e.g. on fatigue testing).

Railway applications - Welding of railway vehicles and components - Part 3: Design requirements; German version EN 15085-3:2007

DIN EN 15085-2:2008 轨道交通.铁路车辆和组件的焊接.第2部分:焊接厂商的质量要求和合格证

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts. This part of the series defines the certification levels as well as the requirements for welding manufacturers and describes the procedure for the recognition of welding manufacturers.

Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer; English version of DIN EN 15085-2:2008-01

DIN EN 15085-1:2008 轨道交通.铁路车辆和部件的焊接法.第1部分:总则

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts. With respect to the railway environment, this series of standards defines the certification and quality requirements for the welding manufacturer to undertake new building and repair work. It then provides an essential link between performance requirements defined during design, and achieves appropriate quality welds during production and the demonstration of the required quality by inspection. This link is achieved by defining a weld performance class during design, which is based on safety and stress factors relevant to railway operation. Quality levels of imperfections are assigned to weld performance classes to ensure a certain level of performance intended during design. Based on these weld performance classes, certification levels for production as well as inspection and testing and qualifications for welding personnel of the manufacturer are specified. This standard deals with welding steel and aluminium alloys including castings. NOTE The principle of this standard may also be applied for welding of other parent materials (e.g. Cu, Mg). This part of the series provides general recommendations and definitions for welding railway vehicles and associated components. Except for specific provisions which are laid down contractually, this standard applies to all assemblies, sub-assemblies or parts welded by any welding process, either manual, partly mechanized, fully mechanized or automatic welding as defined in EN ISO 4063. This series of standards does not deal with product qualification. Items of equipment subject to specific regulations are not relevant to the scope of this series of standards, e.g. air reservoirs according to EN 286-3 and EN 286-4.

Railway applications - Welding of railway vehicles and components - Part 1: General; English version of DIN EN 15085-1:2008-01

DIN EN 15085-4:2008 轨道交通.铁路车辆和组件的焊接.第4部分:生产要求

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts. This part of the series describes the production requirements (i.e. preparation and execution) of the welding work.

Railway applications - Welding of railway vehicles and components - Part 4: Production requirements; English version of DIN EN 15085-4:2008-01

DIN EN 15085-5:2008 轨道交通.铁路车辆和组件的焊接.第5部分:检验、测试和文献

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts. This part of the series specifies: -- inspections and testing to be executed on the welds; -- destructive as well as non-destructive tests to be performed; -- necessary documentation to issue to declare the conformity of the products.

Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation; English version of DIN EN 15085-5:2008-01

GOST R 53076-2008 轨道交通.铁路车辆车身的结构要求

Railway applications. Structural requirements of railway vehicle bodies

GOST R 52944-2008 铁路车辆的生命周期.术语和定义

Live-cycle of railway rolling stock. Terms and definitions

NF F01-885-2:2007 轨道交通.铁路车辆和零部件的焊接.第2部分:焊接厂商的质量要求和资格鉴定

Railway applications - Welding of railway vehicles and components - Part 2 : quality requirements and certification of welding manufacturer.

NF F01-885-1:2007 轨道交通.铁路车辆和零部件的焊接.第1部分:总则

Railway applications - Welding of railway vehicles and components - Part 1 : general.

NF F15-152:2007 轨道交通.火车驾驶室的正面挡风玻璃

Railway applications - Front windscreens for train cabs.

DIN 54837:2007 铁路车辆用材料、小型部件和组合部件的测试.用燃气燃烧器测定燃烧特性

Testing of materials, small components and component sections for rail vehicles - Determination of burning behaviour using a gas burner

DIN 27201-6:2007 铁路车辆的状况.基本原理和生产技术.第6部分:焊接

This document determines the requirements for the welding maintenance in completion to the series of standards of DIN 6700-1 to DIN 6700-6.

State of railway vehicles - Basic principles and production technology - Part 6: Welding

JIS E 5004-5:2007 轨道交通.铁路车辆用电子设备.第5部分:电工元件.HV熔丝用规则

この規格は，電力回路又は補助回路に接続される高圧ヒューズ(以下，“ヒューズ”という。)の特性及び試験方法について規定する。これらの回路の電圧は，IEC 60850:2007による直流600 V～3 000 Vの標準電車線電圧である。また，これらのヒューズは，交流補助回路にも利用できる。

Railway applications -- Electric equipment for rolling stocks -- Part 5: Electrotechnical components -- Rules for HV fuses

JIS E 4014:2007 铁路车辆.绝缘电阻及耐压的试验方法

この規格は，新製した鉄道車両の絶縁抵抗試験方法及び耐電圧試験方法(以下，“試験”という。)につ いて規定する。ただし，機器及び部品単独の試験には適用しない。

Rolling stock -- Test methods for insulation resistance and withstand voltage

BS DD CLC/TS 50502:2007 轨道交通.铁路车辆.无轨电车上的电子设备.安全要求和连接系统

This Technical Specification applies to electrical systems on board trolley buses, as defined in 1.3.1, fed with a nominal line voltage (Un) between 600 V d.c. and 750 V d.c. This Technical Specification defines the requirements and constructional hints, especially to avoid danger of electrical kind to the public and to the personnel. CLC/TS 50502 is normative only for vehicles ordered and designed after publication of the same. This Technical Specification covers vehicles intended for public transport of persons. It refers mainly to earthed networks, but reference is made also to galvanically insulated networks. Annexes B and C are related to the connection systems. The detailed scope of these annexes is given in Annex B.

Railway applications — Rolling stock — Electric equipment in trolley buses — Safety requirements and connection systems

NF F67-155:2007 轨道交通.铁道车辆用电子设备

Railway applications - Electronic equipment used on rolling stock.

DIN EN 61287-1:2007 轨道交通.安装在铁路车辆上的功率变流器.第1部分:特征和试验方法(IEC 61287-1-2005)

Railway applications - Power convertors installed on board rolling stock - Part 1: Characteristics and test methods (IEC 61287-1:2005); German version EN 61287-1:2006

DIN 27202-10 Berichtigung 1:2007 铁路车辆状态.车辆的上部结构和专用设备.第10部分:上部结构测量.DIN 27202-10-2006 勘误表

State of railway vehicles - Superstructure and special equipment of vehicles - Part 10: Measurement of superstructures, Corrigenda to DIN 27202-10:2006-10

UIC OR 592-4-2007 抓具和抓柄用可换车厢.技术条件

Swap bodies are the removable superstructures of road transport vehicles. Their dimensions and some of their fittings are standardised. This standardisation applies particularly to the dimensions, strength parameters, securing devices, of the road vehicle itself, of the wagon and of transhipment arrangements (grab-handling grooves, lower securing parts and, in special cases, upper securing parts).

Swap bodies for grab handling and spreader gripping-Technical conditions