T22 承载系统 标准查询与下载

WJ 2583-2002 装甲车辆主动轮规范

Armored vehicle driving wheel specification

NF R17-105:2001 道路车辆.移动式翻斗用车辆.安全要求

Road vehicles - Vehicles for transportable skips- Safety requirements.

NF R17-107:2001 道路车辆.可拆卸式翻斗用安装液压悬臂的车辆.安全要求

Road vehicles - Vehicles equipped with hydraulic arms for removable skips - Safety requirements.

NF R17-106:2001 道路车辆.移动式翻斗.功能尺寸和一般要求

Road vehicles - Transportable skips - Functional dimensions and general requirements.

NF R17-108:2001 道路车辆.液压悬臂式可拆卸翻斗.功能尺寸和一般要求

Road vehicles - Removable skips for hydraulic arms - Functional dimensions and general requirements.

SAE HS-3300-2001 车轮标准手册,不包括图像,请参阅完整版

This manual provides a comprehensive compilation of technical reports relating to the design and dimensional characteristics, labeling and marking, nomenclature, and testing of wheels and wheel end hardware.

Wheel Standards Manual IMAGES ARE NOT INCLUDED; PLEASE REFER TO GLOBAL

ARMY MIL-DTL-14631 C NOTICE 2-2001 私人汽车导板的一般规格

MIL-DTL-14631C, dated 3 May 2000, is hereby reactivated and may be used for either new or existing design acquisition.

PLATE, AUTOMOBILE, INDIVIDUAL; GENERAL SPECIFICATION FOR

SAE J179-2001 标记盘式车轮和可拆卸轮辋卡车

This SAE Recommended Practice establishes uniform minimum labeling for disc wheels and demountable rims used in trucks, bus, and trailer applications.

Labeling Disc Wheel and Demountable Rims Trucks

SAE J2133-2001 圆盘形车轮辐条输出低点标记

This SAE Recommended Practice provides for standardized disc wheel radial runout low point marking. This marking is used for match-mounting tires on wheels to minimize assembly radial force variation. It applies to tubeless 15 degree drop center disc wheels for use on class 5, 6, 7, and 8 commercial vehicles.

Disc Wheel Radial Runout Low Point Marking

SAE J1992-2001 车轮/轮辋.军用车辆.试验规程和性能要求

This SAE Recommended Practice provides minimum performance requirements and uniform laboratory procedures for fatigue testing of disc wheels, demountable rims, and bolt-together wheels intended for normal highway use on military trucks, buses, truck-trailers, and multipurpose passenger vehicles. For wheels and rims intended for normal highway use by trucks, see SAE J 267. For wheels intended for normal highway use by passenger cars, light trucks, and multipurpose vehicles, see SAE J328. For wheels used on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, see SAE J1204. This document does not cover off-highway or other special application wheels and rims.

Wheels/Rims - Military Vehicles - Test Procedures and Performance Requirements

SAE J694-2001 盘轮/轮毂或盘鼓接口尺寸.商用车辆

This SAE Recommended Practice contains dimensions and their tolerances concerning disc wheel to hub or drum interface areas for commercial vehicles and multipurpose passenger vehicles. Stamped disc wheels for single applications and special or less common applications are not covered in this document.

Disc Wheel/Hub or Drum Interface Dimensions- Commercial Vehicles

SAE J1232-2000 轿车和轻型卡车牵引装置轮廓测定和分类

The purpose of this SAE Recommended Practice is to set up a guide as to body, frame, and wheelhouse clearances required to accommodate tire traction devices (e.g., tire chains), and to provide a means of classifying these devices according to their maximum profile. In addition, it enables the vehicle manufacturer to specify the proper traction devices for each vehicle. This report is intended to apply to passenger cars and light trucks up to 4535 kg (10, 001 lb) GVW. this recommended practice is not to be construed as approving traction device operation at conditions exceeding manufacturer's specifications, although short periods of such operations may be required for test purposes.

Passenger and Light Truck Tire Traction Device Profile Determination and Classification

ARMY MIL-DTL-14631 C SUPP 1A-2000 私人汽车导板的一般规格

This supplement forms a part of MIL-DTL-14631 C, dated 16 December 1997.

PLATE, AUTOMOBILE, INDIVIDUAL; GENERAL SPECIFICATION FOR

SAE J876-2000 阔口盘轮和可拆卸轮辋

This SAE Recommended Practice establishes uniform engineering nomenclature for wide base disc wheels and Demountable rims. This nomenclature and accompanying figures are intended to define fundamental wide base disc wheels and demountable rim terms. The dimensions given are those necessary to maintain serviceability and interchangeability of the disc wheels and demountable rims with standard hardware.

Wide Base Disc Wheels and Demountable Rims

DLA DSCC-DWG-85039 REV B-2000 一般规格的微型抽屉机架接插件

This drawing covers the general requirements and tests for connectors using insert arrangements containing combinations of signal contacts and empty cavities for insertion of shielded, coaxial, high power and high voltage contacts.

CONNECTORS, ELECTRICAL, RACK AND PANEL, MINIATURE, GENERAL SPECIFICATION FOR

SAE J2475-2000 商用车辆轮子末端组件和轮轴接口尺寸

This SAE Recommended Practice contains dimensions and tolerances for spindles in the interface area. Interfacing components include bearing cones, bearing spacers, and wheel hubs. This document is intended for axles commonly used on Class 7 and 8 commercial vehicles. Included are SAE axle configurations FF, R, N, and P. SAE configurations FC, FL, K, L, U, and W are not included, but may be added in the future. The purpose of this document is to establish dimensional guidelines to promote a functional standardization of spindle dimensions wheel end assemblies. Proper hub component dimensions can then be established.

Wheel End Assembly and Axle Spindle Interface Dimensions Commercial Vehicles

ARMY MIL-C-62310 A VALID NOTICE 2-2000 M113A2.M106A2.M125A2和 M577A2型全履带装甲车和M741A1和 M901全履带底盘武器

MIL-C-62310A(AT) remains inactive for new design, however, the document is valid for acthewhen needed.

CARRIERS, ARMORED, FULL-TRACKED: M113A2, M106A2, M125A2, AND M577A2, AND CHASSIS, WEAPON, FULL- TRACKED: M741A1, AND M901

SAE J712-1999 工业和农业盘形轮

The purpose of this SAE Recommended Practice is to provide a selection of disc wheels for industrialand agricultural application with a maximum of interchangeability.This is accomplished by establishing five groups of disc wheels, in each of which the hub mounting elementsare common. These groups are designated 4 bolt, 5 in bolt circle; 5 bolt, 4.5 in bolt circle; 5 bolt, 5.5 in boltcircle; 6 bolt, 6 in bolt circle; and 8 bolt, 8 in bolt circle.Further, this document establishes an SAE part number and the maximum rated radial load for each standardwheel. In addition, the document requires the wheel manufacturer's name or trademark to be impressionstamped on the wheel with location at the discretion of the manufacturer.

Industrial and Agricultural Disc Wheels

JIS D 4218:1999 汽车部件.轮.轮辋（截面）轮廓

この規格は，主として乗用車用，小形トラック用，並びにトラック及びバス用のホイールに使用する5°深底リム及び15°深底リム(以下，リムという。)のタイヤを装着する側の輪郭(以下，輪郭という。)及び寸法について規定する。

Automobile parts -- Wheels -- Contours of rims

JIS D 6402:1999 工业车辆和越野车辆用车轮.轮辋轮廓

この規格は，産業車両及び建設車両用のホイールに使用する5° 深底リム，浅底リム，5° 平底リム，傾斜座リム，15° 深底リム及びニつ割りリム(以下，リムという。)のタィヤを装着する側の輪郭(以下，輪郭という。)及び寸法について規定する。

Wheels for industrial vehicles and off the road service -- Contours of rims