T22 承载系统 标准查询与下载

NF R12-792-2:2013 卡车和公共汽车的轮胎和轮辋(公制系列).第2部分:轮辋

Truck and bus tyres and rims (metric series) - Part 2: rims

SAE J849-2013 多组挂车和公共汽车牵引用连接位置和附属位置

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This SAE Recommended Practice establishes the recommended locations for the air brake and electrical connections for towing multiple trailers. It applies to all commercial trailers except drop frame and car haul types.

Connection and Accessory Locations for Towing Multiple Trailers Truck and Bus

SAE J1204-2012 车轮.娱乐和多用途拖车试验规程

This SAE Recommended Practice provides uniform procedures and minimum performance requirements for fatigue testing ferrous and aluminum wheels intended for normal highway use on travel, camping, and boat and light utility trailers drawn by passenger cars, light trucks, and multipurpose vehicles. For procedures and minimum performance requirements for wheels used on trucks, see SAE J267, and for wheels used on passenger cars, see SAE J328. For the application of passenger car and light truck wheels (inset less than 0.10 m (0.33 ft)) to this trailer service, use this procedure. For the application of heavier truck wheels (inset 0.10 m (0.33 ft) or more) use S

Wheels Recreational and Utility Trailer Test Procedure

SAE J2316-2012 乘用车和轻型卡车轮用螺母座强度试验方法和性能要求

This SAE Recommended Practice provides minimum performance requirements and uniform procedures for nut seat system strength of wheels intended for normal highway use on passenger cars, light trucks, (except dual wheels, which are covered by SAE J1965) and multipurpose passenger vehicles. The nut seat system includes the wheel, wheel bolts, and wheel nuts as applicable. Many factors must be considered in design and validation of wheel attachments for each specific vehicle. The individual components should be evaluated per the SAE Standards referenced.

Wheel Nut Seat System Test Procedures and Performance Requirements for Passenger Cars and Light Trucks

NF R99-032:2012 轮胎阀 - 尺寸和标志.

Tyre valves - Dimensions and designation.

SAE J1992-2012 车轮/轮辋.军用车辆.试验规程和性能要求

This SAE Recommended Practice provides minimum performance requirements and uniform laboratory procedures for fatigue testing of disc wheels, demountable rims, and bolt-together wheels intended for normal highway use on military trucks, buses, truck-trailers, and multipurpose passenger vehicles. For wheels and rims intended for normal highway use by trucks, see SAE J 267. For wheels intended for normal highway use by passenger cars, light trucks, and multipurpose vehicles, see SAE J328. For wheels used on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, see SAE J1204. This document does not cover off-highway or other special application wheels and rims.

Wheels/Rims--Military Vehicles--Test Procedures and Performance Requirements

KS M ISO 29802:2011 全地形(AT)轮胎和轮辋.5度锥形轮辋充气轮胎的标记符号.名称、尺寸、标记和额定载荷

이 표준은 주로 전천후 차량용으로 고안된 공기압 타이어의 명칭, 크기, 표시와 하중 등급을

All terrain(AT) tyres and rims-Symbol marked pneumatic tyres on 5 degrees tapered rims-Designation, dimension, marking and load ratings

DIN 74361-3:2011 机动车辆和牵引车用圆盘轮.第3部分:尺寸和轮毂定心用固定装置

Disc wheels for motor vehicles and trailers - Part 3: Dimensions and fastening devices for hub-centering

QC/T 259-2011 车轮轮辋与轮辐焊接强度要求及试验方法

本标准规定了车轮轮辋与轮辐焊接强度要求及试验方法。 本标准适用于采用5°DC轮辋的钢制车轮。

Performance requirements and test methods of joint between rim and disc

QC/T 241-2011 汽车无内胎车轮密封性试验方法

本标准规定了汽车车轮密封性的两种试验方法，即压缩空气试验法和氦气试验法。 本标准适用于配装无内胎轮胎的汽车车轮。

Air leakage test methods of automobile wheels for tubeless tires

SAE J851-2011 卡车和客车垫圈间箍和可拆卸轮辋,可拆卸轮辋的尺寸轮

This SAE Recommended Practice establishes dimensions for wheels for demountable rims, demountable rims, and rim spacers. The dimensions given are those necessary to maintain serviceability and interchangeability of the demountable rim, rim spacers, and wheels for demountable rims. Special and less common applications are not covered in this recommended practice.

Dimensions - Wheels for Demountable Rims, Demountable Rims, and Spacer Bands - Truck and Bus (Stabilized Type)

SAE J2133-2011 圆盘形车轮辐条输出低点标记

This SAE Recommended Practice provides for standardized steel disc wheel radial runout low point marking. This marking is used for match-mounting tires on wheels to minimize assembly radial force variation. It applies to tubeless 15 degree drop center disc wheels for use on class 5, 6, 7, and 8 commercial vehicles.

Disc Wheel Radial Runout Low Point Marking (Stabilized Type)

BS ISO 4107:2010 商用车辆.轮毂附件尺寸规格

Commercial vehicles - Wheelhub attachment dimensions

ISO 4107:2010 商用车辆.轮毂安装尺寸

Commercial vehicles - Wheel-hub attachment dimensions

SAE J1982-2010 乘用车、轻型卡车和多用途车辆的车轮命名

This SAE Recommended Practice establishes uniform engineering nomenclature for the most common wheel constructions, and their components used on passenger cars, light trucks, and multipurpose vehicles. These wheel constructions are welded "Disc Wheels", "Cast Wheels" and "Forged Wheels". This nomenclature and accompanying drawings are intended to define fundamental wheel terms rather than to provide a comprehensive tabulation of all wheel design types.

Nomenclature Wheels for Passenger Cars, Light Trucks, and Multipurpose Vehicles

JIS D 4220:2009 汽车零件.车轮.紧固方法和尺寸

This Standard specifies the fastening methods, and shapes and dimensions of wheels for automobiles.However, this Standard is not applicable to wheels for two-wheeled vehicles, industrial vehicles, construction vehicles and agricultural machines.

Automobile parts -- Wheels -- Fastening methods and dimensions

SAE J2530-2009 乘用车和轻型卡车用配件市场车轮的性能要求和试验程序

This SAE Recommended Practice provides performance, sampling, and certifying requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks or multipurpose vehicles, see SAE J 1204. These performance requirements apply only to wheels made of materials included in Table 1 and Table 2. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.

Aftermarket Wheels Passenger Cars and Light Truck Performance Requirements and Test Procedures

ISO 29802:2009 全地形(AT)轮胎和轮辋.5度锥形轮辋充气轮胎的标记符号.名称、尺寸、标记和额定载荷

All terrain (AT) tyres and rims - Symbol marked pneumatic tyres on 5 degrees tapered rims - Designation, dimension, marking and load ratings

SAE J1095-2009 耐久试验程序:可拆卸轮圈的轮毂和车轮

This SAE Recommended Practice provides uniform laboratory procedures for fatigue testing of spoke wheels for demountable rims and hubs intended for normal highway use on trucks, buses, truck trailers, and multipurpose passenger vehicles. The hubs included have bolt circle diameters from 165.1 to 335.0 mm (6.50 to 13.19 in). It is up to each hum and/or wheel for demountable rims developer to determine what test method, accelerated load factor and cycle life reuirements are applicable to obtain satisfactory service life in a given application. When deviations from the procedures recommended herein are made, it is the responsibility of the hub and/or wheel for demountable rims developer to modify other parameters to obtain parameters to obtain satisfactory service life.

Fatigue Test Procedures: Hubs and Wheels for Demountable Rims

SANS 61534-22:2009 Powertrack系统.第22部分:对地板或地板下安装的powertrack系统的特殊要求

Applies to power track systems that are intended to be mounted on, or under the floor level and floor service units which are mounted on the floor, under the floor or flush with the floor.

Powertrack systems Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation