T22 承载系统 标准查询与下载

GOST R 53337-2009 专用车辆.承载结构强度和动力学特性要求

Special rolling stock. Requirements for bearing structure stength and for dynamic properties

SAE J1965-2008 道路车辆.商用车和多功能客车用车轮.固定式螺母.试验方法

This SAE Recommended Practice applies to nuts as specified in SAE J 694 and J1835 used for wheel and demountable rim attachment. Only the test methods necessary to assure proper wheel or rim assembly are assembly are specified. Fasteners for less common and special applications are not included. This document, to ensure proper assemblies, specifies test methods for metric or english, one- or two-piece flange nuts, single ball seat nuts, inner and outer ball seat nuts, and rim clamp nuts.

Road Vehicles--Wheels for Commercial Vehicles and Multipurpose Passenger Vehicles--Fixing Nuts--Test Methods

SAE J849-2008 多组挂车和公共汽车牵引用连接位置和附属位置

This SAE Recommended Practice establishes the recommended locations for the air brake and electrical connections for towing multiple trailers. It applies to all commercial trailers except drop frame and car haul types.

Connection and Accessory Locations for Towing Multiple Trailers Truck and Bus

SAE J1573-2008 OEM塑料零件修理

This SAE Recommended Practice defines the information required to repair the various types of plastics found on modern light-duty highway vehicles. Information is included for the repair and refinishing of most flexible, semi-flexible, and rigid plastic body parts, both interior and exterior. Repair information is described for all commonly used plastics including polyurethanes, polycarbonate blends, modified polypropylenes, polyethylenes, nylons, sheet-molded compounds (SMC), and fiber-reinforced plastics (FRP). Repairs can be made to these types of plastics using two-part (2K) repair adhesives, plastic welding, and other materials available from body shop suppliers. When a new type of plastic is being introduced to the market through a new vehicle program, specific repair and refinishing procedures should be provided, following the format in this document. The use of plastics in cars has increased to over 12% by weight, with several types being used for structural and mechanical applications. Interior and exterior plastic body parts have become an integral part of the automotive design, reducing overall weight to aid in increasing fuel efficiency. The use of plastic compounds for these parts has expanded to include polyurethanes, polycarbonate blends, modified polypropylenes, polyethylenes, nylons, sheet-molding compound (SMC), and fiber-reinforced plastic (FRP). This document is intended to guide vehicle manufacturers, material suppliers, and equipment suppliers in providing timely repair information to repairers and insurers. Providing this information prior to vehicle introduction is necessary to allow damaged vehicles to be restored to their pre-accident condition.

OEM Plastic Parts Repair

KS R ISO 21750:2008 道路车辆.有关增进轮胎充气压力监控的安全

이 표준은 4개의 바퀴에 각각 일체형으로 장착되고, 375 kPa 이하의 기준 압력을 가지

Road vehicles-Safety enhancement in conjunction with tyre inflation pressure monitoring

BS ISO 13988:2008 客车车轮.夹片配重和轮辋凸缘术语、试验程序和性能要求

Passenger vehicle wheels - Clip balance weight and rim flange nomenclature, test procedures and performance requirements

ISO 13988:2008 客车车轮.夹片配重和轮辋凸缘术语、试验程序和性能要求

This International Standard specifies procedures and minimum performance requirements for testing without tyres the retention of clip balance weights for use on wheels for passenger vehicles. It also specifies general features for configurations of clip balance weights and rim flanges for light alloy and steel wheels intended for use on passenger cars. Alternative materials and geometries can be considered in the future.

Passenger vehicle wheels - Clip balance weight and rim flange nomenclature, test procedures and performance requirements

DIN 7829:2008 轮圈和车轮.作标记

Rims and wheels - Marking

SANS 1496:2008 机动车上安装的轮翼

Covers the requirements for wheel flaps fitted to motor vehicles and to articulated tractor units of gross vehicle mass or gross combination mass, respectively, exceeding 7,5 t, and to trailers of gross vehicle mass exceeding 3,5 t, for the purpose of pr

Wheel flaps fitted to motor vehicles

SAE J2530-2008 乘用车和轻型卡车用配件市场车轮的性能要求和试验程序

This SAE Recommended Practice provides performance and sampling requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks or multipurpose vehicles, see SAE J1204. These performance requirements apply only to wheels made of materials included in Table 1 and Table 2. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.

Aftermarket Wheels Passenger Cars and Light Truck Performance Requirements and Test Procedures

NF H96-701-3:2008 工业车辆轮胎和轮辋.第3部分:轮辋

Industrial tyres and rims - Part 3 : rims.

BS ISO 3739-3:2008 工业车辆轮胎和轮辋.轮辋

This part of ISO 3739 specifies the main requirements, including size designation and marking, of 5° tapered and flat base rims, with diameters not exceeding rim diameter code 15 for pneumatic tyres and for solid tyres for pneumatic tyre rims, primarily intended for industrial vehicles for use on prepared surfaces. ISO 3739-1 gives the designation, dimensions and marking, and ISO 3739-2 gives the load ratings, of pneumatic tyres (metric series). ISO 10499-1 covers the designation, dimensions and marking of rubber solid tyres (metric series) for pneumatic tyre rims. Rim dimensions are specified for size and contour only. The tyre and wheel/rim manufacturers are consulted for confirmation of the suitability of the tyre/rim combinations, particularly with regard to rim profile and wheel strength.

Industrial tyres and rims - Rims

ISO 3739-3:2008 工业车辆轮胎和轮辋.第3部分:轮辋

This part of ISO 3739 specifies the main requirements, including size designation and marking, of 5° tapered and flat base rims, with diameters not exceeding rim diameter code 15 for pneumatic tyres and for solid tyres for pneumatic tyre rims, primarily intended for industrial vehicles for use on prepared surfaces. ISO 3739-1 gives the designation, dimensions and marking, and ISO 3739-2 gives the load ratings, of pneumatic tyres (metric series). ISO 10499-1 covers the designation, dimensions and marking of rubber solid tyres (metric series) for pneumatic tyre rims. Rim dimensions are specified for size and contour only. The tyre and wheel/rim manufacturers are consulted for confirmation of the suitability of the tyre/rim combinations, particularly with regard to rim profile and wheel strength.

Industrial tyres and rims - Part 3: Rims

ASTM A551/A551M-08(2013) 铁路和高速交通用碳钢轮胎的标准规格

1.1 This specification covers seven classes of carbon steel tires for railway and rapid transit use. 1.1.1 Class A—For untreated driving tires for locomotives in passenger service. 1.1.2 Class AHT—For heat-treated driving tires for locomotives in passenger service. 1.1.3 Class B—For untreated driving tires for freight locomotives and tires for locomotive-truck, tender-truck, trailer and car wheels, and miscellaneous service. 1.1.4 Class BHT—For heat-treated driving tires for freight locomotives and tires for trailer wheels. 1.1.5 Class C—For untreated tires for switching locomotives. 1.1.6 Class CHT—For heat-treated driving tires and switching locomotives and tires for locomotive-trucks, tender-trucks, trailer and car wheels, and miscellaneous service. 1.1.7 Class DHT—For heat-treated driving tires for locomotives with light braking conditions, heavily loaded trailer tires, and rapid transit wheels where off-tread brakes are employed. 1.2 Supplementary requirements, including those in the general requirements of Specification A788/A788M, are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text and tables the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4 Unless the order specifies the applicable “M” specification designation, the tires shall be furnished to the inch-pound units.

Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications

SAE J267-2007 车轮/轮缘.性能要求和试验程序.卡车和客车

This SAE Recommended Practice provides minimum performance requirements and uniform laboratory procedures for fatigue testing of wheels and demountable rims intended for normal highway use on trucks, buses, truck-trailers, and multipurpose passenger vehicles. For other wheels intended for normal highway use and temporary use on passenger cars, light trucks, and multipurpose vehicles, see SAE J328. For wheels used on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, see SAE J1204. For bolt together military wheels, see SAE J1992.This document does not cover other special application wheels and rims.

Wheels/Rims Performance Requirements and Test Procedures Truck and Bus

SANS 498:2007 商用车辆及其拖车轮圈的更换

Describes minimum performance requirements for fatigue testing of wheels and demountable rims intended for vehicles of categories of M2, M3, N, O3 and O4, as the replacement of the original equipment.

Replacement of wheel rims for commercial vehicles and their trailers

SAE J2633-2007 涂层用轮子和轮子修整的人工老化测试

This SAE lab test procedure should be used when performing the following specialized weathering tests for wheels; Florida Exposure, QUV, Xenon and Carbon Wetherometer. In addition to these procedures, some additional post-weathering tests may be specified. Please refer to customer specifications for these requirements.

Wheel and Wheel Trim Weathering Testing for Paint Coatings

NF R12-792-2:2007 卡车和公共汽车的轮胎和轮辋(米制系列).第2部分:轮辋

Truck and bus tyres and rims (metric series) - Part 2 : rims.

SAE J2635-2007 镀铝轮子和镀铝轮眉的丝状腐蚀试验规程

This test procedure defines a laboratory procedure for generating and evaluating filiform corrosion on painted aluminum wheels and painted aluminum wheel trim. While this test was developed specifically for the testing of painted aluminum wheels and wheel trim it may be applicable to other components. The application owner will need to assess if this test generates filiform similar to that found in the relevant usage to ensure it will provide accurate data for the application. To establish a uniform test method for the wheel and wheel trim industry when assessing the resistance of components to filiform corrosion. An objective is to reduce test procedure proliferation and thereby reduce costs for establishing and maintaining unique test facilities, test methods, measurement methods, laboratory accreditations, and operator training. The net effect is to reduce cost while improving the quality of the test data by adopting uniform and standardized test methods. The procedure does not establish performance standards for the components. Performance standards are to be established by the users of the test and/or their clients. The method and format for documenting proficiency is defined.

Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim

SANS 20124:2007 客车及其拖车的车轮认证的统一规定

Covers new replacement wheels designed for vehicles in categories M1, M1G, O1 and O2. It comprises requirements for wheel manufacture and installation.

Uniform provisions concerning the approval of wheels for passenger cars and their trailers