GB/T 3859.1-2013
Semiconductor converters.General requirements and line commutated converters.Part 1-1:Specification of basic requirements (English Version)

Standard No.

GB/T 3859.1-2013

Language

Chinese, Available in English version

Release Date

2013

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Latest

GB/T 3859.1-2013

Replace

GB/T 3859.1-1993

Scope

This part of GBT 3859 specifies the performance of all semiconductor power converters and semiconductor power switches using controllable and (or) uncontrollable electronic valve devices. Electronic valve devices mainly include semiconductor devices, including uncontrollable devices (ie rectifier diodes) and controllable devices (ie various thyristors and power transistors). The controllable device can reversely block or reversely conduct, and can be controlled by means of current, voltage or light. Assume that the non-bistable device operates in the switching state. This part mainly specifies the basic requirements for converters in general, and the requirements for grid-commutated converters applicable to converting alternating current to direct current or converting direct current to alternating current. If there is no product standard for other types of power electronic converters, the contents of this section also apply. These specific requirements apply to semiconductor power converters for power conversion, commutation (for example: semiconductor self-commutated converters) or special applications (for example: semiconductor converters for direct current motor drives), or known characteristics Combinations (for example: direct DC converters for electric drive rolling stock). This part applies to all power converters that are not covered by specific product standards or whose special performance is not covered by specific product standards. Specific product standards for power converters should refer to this part.

GB/T 3859.1-2013 Referenced Document

• GB 12668.3 Adjustable speed electrical power drive systems.Part 3:EMC requirements and specific test methods
• GB 17625.1 Electromagnetic compatibility—Limits—Part 1: Limits for harmonic current emissions (equipment input current ≤ 16A per phase)*， 2022-12-29 Update
• GB 2536-2011 Fluids for electrotechnical applications.Unused mineral insulating oils for transformers and switchgear
• GB 4208 Degrees of protection provided by enclosure(IP code)
• GB 5749-2006 Standards for drinking water quality
• GB 7260.1 Uninterruptible power systems(UPS).Part 1-1:General and safety requirements UPS used in operator access areas
• GB 7260.2 Uninterruptible power systems(UPS).Part 2:Electromagnetic compatibility (EMC) requirements
• GB 7260.4 Uninterruptible power systems (UPS). Part 1-2: General and safety requirements for UPS used in restricted access locations
• GB/T 10236 Guide for compatibility and protection of interference effects between semiconductor convertors and power supply system
• GB/T 12668.6 Adjustable speed electrical power drive systems.Part 6: Guide for determination of types of load duty and corresponding current ratings
• GB/T 13384 General specifications for packing of mechanical and electrical product
• GB/T 13422 Semiconductor converters.Electrical test methods
• GB/T 16859 Terminal marking for valve device stacks and assemblies and for power convertor equipment
• GB/T 16895.1 Low-voltage electrical installations Part 1: Basic principles, general characteristic evaluation and definitions
• GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems.Part 1:Principles,requirements and tests
• GB/T 17045 Protection against electric shock—Common aspects for installations and equipment*， 2020-03-31 Update
• GB/T 2900.33-2004 Electrotechnical terminoligy-Power electronics
• GB/T 3859.2-2013 Semiconductor converters.General requirements and line commutated converters.Part 1-2:Application guide
• GB/T 3859.3-2013 Semiconductor converters.General requirements and line commutated converters.Part 1-3:Transformers and reactors
• GB/T 4026-2010 Basic and safety principles for man-machine interface,marking and identification.Identification of equipment terminals and conductor terminations

GB/T 3859.1-2013 history

• 2013 GB/T 3859.1-2013 Semiconductor converters.General requirements and line commutated converters.Part 1-1:Specification of basic requirements
• 1993 GB/T 3859.1-1993 Semiconductor convertors.Specification of basic requirements

GB/T 3859.1-2013 -All Parts