GB 6932-2015
Domestic gas instantaneous water heater

Standard No.
GB 6932-2015
Language
Chinese
Release Date
2015
Published By
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Lastest
GB 6932-2015
Replace
GB 6932-2001
Scope
This standard specifies the terms and definitions, classification and model, material and structure requirements, performance requirements, test methods, inspection rules and signs, installation, packaging, transportation and storage of household gas instant water heaters. This standard applies to household hot water gas instant water heaters with a rated heat load not greater than 70 kW (hereinafter referred to as hot water heaters); the rated heat load is not greater than 70 kW, the maximum heating water pressure is not greater than 0.3 MPa, and the heating water temperature is not greater 95 ℃ indoor forced supply and exhaust type, outdoor domestic heating gas instantaneous water heater (hereinafter referred to as heating water heater) and domestic dual-purpose gas instantaneous water heater (hereinafter referred to as two-throwing water heater), including condensing water supply water heater, heating Special requirements for water heaters and dual-purpose water heaters. This standard does not apply to gas volumetric water heaters.

GB 6932-2015 Referenced Document

  • GB 14536.1 Automatic electrical controls for household and similar use.Part 1:General requirements
  • GB 14536.6 Automatic electrical controls for household and similar use.Particular requirements for automatic electrical burner control systems
  • GB 4208 Degrees of protection provided by enclosure(IP code)
  • GB 4706.1-2005 Household and similar electrical appliances-Safety Part 1:General requirements
  • GB/T 12113-2003 Methods of measurement of touch current and protective conductor current
  • GB/T 12206-2006 Testing method to determine the calorific values of town gas
  • GB/T 13611 Classification and basic characteristics of city gas*， 2018-03-15 Update
  • GB/T 16411-2008 Universal test methods of gas burning appliances for domestic use
  • GB/T 17624.1 Electromagnetic compatibility--General--Application and interpretation of fundamental definitions and terms
  • GB/T 17626.4 Electromagnetic compatibility－Testing and measurement techniques－Electrical fast transient/burst immunity test*， 2018-06-07 Update
  • GB/T 17626.5 Electromagnetic compatibility—Testing and measurement techniques－Surge immunity test*， 2019-06-04 Update
  • GB/T 191 Packaging.Pictorial marking for handling of goods
  • GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
  • GB/T 2828.2 Inspection procedures by count sampling - part 2 : sampling plans for isolated lot inspection retrieved by limit quality LQ
  • GB/T 3280 Cold rolled stainless steel plate, sheet and strip
  • GB/T 5013.1 Rubber insulated cables of rated voltages up to and including 450/750 V.Part 1:General requirements
  • GB/T 5023.1 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V.Part 1:General requirements
  • GB/T 5465.2 Graphical symbols for use on electrical equipment.Part 2: Graphical symbols
  • GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
  • GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
  • GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads

GB 6932-2015 history



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved