29.160.20 发电机 标准查询与下载

DL/T 1766.3-2021 水氢氢冷汽轮发电机检修导则 第5部分：内冷水系统检修

Maintenance guideline for water-hydrogen hydrogen-cooled turbogenerators Part 5: Maintenance of internal cooling water system

T/CEEIA 562-2021 风力发电机组延寿评估指南

本文件规定了风力发电机组的延寿评估概述、延寿评估方法及退役等。 本文件适用于已投入运行的风力发电机组延寿评估流程。

Assessment guide for lifetime extension of wind turbine

T/STIC 110002-2021 QFS型660MW等级双水内冷汽轮发电机

本文件规定了QFS型660 MW等级双水内冷汽轮发电机的型式和基本参数、技术要求、试验方法和检 验项目、铭牌和出品编号、装箱及运输等。 本文件适用于QFS型660 MW等级双水内冷汽轮发电机。

QFS Type 660MW Class Dual Inner Water-Cooled Generators

DIN EN IEC 60034-3:2021 旋转电机 第3部分：由蒸汽轮机或燃气轮机驱动的同步发电机和同步补偿器的特定要求（IEC 60034-3:2020）；德文版 EN IEC 60034-3:2020

This part of IEC 60034 applies to three-phase synchronous generators, having rated outputs of 10 MVA and above driven by steam turbines or combustion gas turbines. Also included are synchronous MVAr compensators connected to a grid and running without mechanical loading. This sta

Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators (IEC 60034-3:2020); German version EN IEC 60034-3:2020

T/CEEIA 504-2021 六相脉冲同步发电机试验导则

本文件规定了六相脉冲同步发电机（双Y绕组相移30°）工厂检验、现场交接试验、启动试验、性能试验的方法。 本文件适用于六相脉冲同步发电机（双Y绕组相移30°）

Guide for the test of six-phase pulse synchronous generator

PN-EN IEC 60034-3-2021-02 E 旋转电机 第3部分：由蒸汽轮机或燃气轮机驱动的同步发电机和同步补偿器的特定要求（IEC 60034-3:2020）

Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators (IEC 60034-3:2020)

OVE EN 50549-2-2020 与配电网络并联的发电厂的要求 第2部分：连接到中压配电网络 发电厂直至并包括 B 型（德文版）

Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network - Generating plants up to and including Type B (german version)

OVE EN 50549-1-2020 发电厂与配电网络并联的要求 第1部分：连接到低压配电网络 发电厂直至并包括 B 型（德文版）

Requirements for generating plants to be connected in parallel with distribution networks - Part 1: Connection to a LV distribution network - Generating plants up to and including Type B (german version)

NB/T 10403-2020 大中型中温厌氧发酵及发电机组运行管理规范

Operation and management specifications for large and medium-sized medium-temperature anaerobic fermentation and power generation units

ISO 8528-3:2020 往复式内燃机驱动的交流发电机组第3部分:发电机组交流发电机

This document specifies the principal characteristics of alternating current (a.c.) generators under the control of their excitation control system when used for reciprocating internal combustion (RIC) engine driven generating set applications and supplements the requirements given in IEC 60034-1. It covers the use of such a.c. generators for land and marine applications, excluding generating sets used on aircraft or to propel land vehicles and locomotives. NOTE For some specific applications (e.g. essential hospital supplies, high-rise buildings, operation parallel with the grid), supplementary requirements can be necessary. The provisions of this document can be regarded as the basis for establishing any supplementary requirements. For a.c. generating sets driven by other reciprocating-type prime movers (e.g. steam engines) the provisions of this document can be used as basis for establishing these requirements.

Reciprocating internal combustion engine driven alternating current generating sets — Part 3: Alternating current generators for generating sets

T/CEC 329-2020 发电机绝缘过热在线监测装置技术要求

本文件规定了发电机绝缘过热在线监测装置的技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本文件适用于采用热分解产物检测方式的发电机绝缘过热在线监测装置。

Technical requirements for generator insulation overheating on-line monitoring device

T/CSEE 0152-2020 汽轮发电机励磁系统运行及检修技术导则

本标准规定了汽轮发电机励磁系统运行监视与巡检、运行操作及检修等。 本标准适用于100MW及以上汽轮发电机励磁系统。100MW以下汽轮发电机励磁系统可参照执行。

Technical guidelines for operation and maintenance of turbine generator excitation system

T/CEEIA 405-2019 风力发电机组智能控制技术规范

本标准规定了并网型水平轴风力发电机组智能控制功能的术语和定义、一般要求、功能要求、试验方法、检验规则、产品信息等。 本标准适用于并网型水平轴风力发电机组（以下简称“机组”）的智能控制系统。

Wind turbine generator systems Intelligent control technical specifications

T/CEEIA 407-2019 海上直驱型风力发电机组技术规范

本标准规定了水平轴海上直驱型风力发电机组的环境条件、技术要求、试验方法、检验规则、标志、包装贮存、运输、安装、运行、维护、随机文件等。 本标准适用于海上直驱型风力发电机组（以下简称“机组”）,包括风轮、发电机、机舱、塔筒几部分。

Technical specification of offshore direct-drive wind turbine generator systems

T/CEEIA 387-2019 绿色设计产品评价技术规范 直驱永磁风力发电机组

本标准规定了直驱永磁风力发电机组绿色设计产品评价的评价原则、评价方法、评价指标、评价流程、评价要求、评价报告及文档管理。 本标准适用于直驱永磁风力发电机组绿色设计产品全生命周期的评价。

Technical specifications for green-design product assessment Wind turbine of direct drive permanent magnet

DL/T 2011-2019 大型发电机定子绕组现场更换处理试验规程

Test procedure for on-site replacement and treatment of large generator stator windings

DL/T 1766.2-2019 水氢氢冷汽轮发电机检修导则 第2部分：定子检修

Water-hydrogen-hydrogen-cooled turbogenerator inspection guideline Part 2: Stator inspection

DL/T 1766.3-2019 水氢氢冷汽轮发电机检修导则 第3部分：转子检修

Water Hydrogen Hydrogen Cooled Turbine Generator Overhaul Guidelines Part 3: Rotor Overhaul

DL/T 294.3-2019 发电机灭磁及转子过电压保护装置技术条件 第3部分 转子过电压保护

Generator demagnetization and rotor overvoltage protection device technical requirements part 3 rotor overvoltage protection

DL/T 294.4-2019 发电机灭磁及转子过电压保护装置技术条件 第4部分 灭磁容量计算

Technical Specifications for Generator De-excitation and Rotor Overvoltage Protection Device Part 4 Calculation of De-excitation Capacity