43.080.01 商用车辆综合 标准查询与下载
共找到 314 条与 商用车辆综合 相关的标准，共 21 页
本标准规定了电动汽车传导充电用三相交流充电接口的通用要求、功能定义、型式结构、参数和尺寸。 本标准适用于电动汽车传导充电用三相交流充电接口，其额定电压不超过440V（AC），频率50Hz，额定电流不超过63A（AC）。
General requirements for three-phase AC charging interface of electric vehicles
- ICS
- 43.080.01
- CCS
- T47
- 发布
- 2014-12-02
- 实施
- 2015-03-02
本标准规定了电动汽车车载信息服务的一般要求，包括基础数据、终端设备、车载软件、功能服务、运营监控的相关规定。 本标准适用于纯电动汽车、混合动力汽车。
General requirements for on-board information services of electric vehicles
- ICS
- 43.080.01
- CCS
- T47
- 发布
- 2014-12-02
- 实施
- 2015-03-02
本标准规定了燃料电池电动汽车能量消耗量的试验方法。 本标准适用于使用压缩氢气为工作介质，工作压力不超过35MPa的燃料电池电动汽车。
Test method for energy consumption of fuel cell electric vehicles
- ICS
- 43.080.01
- CCS
- T47
- 发布
- 2014-12-02
- 实施
- 2015-03-02
本标准规定了电动汽车用驱动电机（以下简称驱动电机）启动特性试验方法。 本标准适用于电动汽车用驱动电机。
Test method for starting characteristics of drive motors for electric vehicles
- ICS
- 43.080.01
- CCS
- T47
- 发布
- 2014-12-02
- 实施
- 2015-03-02
本标准规定了直流充电机中非车载充电机的检验规则、试验方法等内容。 本标准适用于电动汽车非车载直流充电机。
Electric vehicle DC charger inspection specification
- ICS
- 43.080.01
- CCS
- T47
- 发布
- 2014-12-02
- 实施
- 2015-03-02
本标准规定了制冷剂为HFC-134a（R134a）的电动乘用车用空调系统（以下简称“空调系统”）的型式、技术要求、试验方法、检验规则及检验项目、标识、包装、运输和贮存的要求。 本标准适用于电动乘用车用空调系统,其它类似结构的电动汽车用空调系统可参照使用。 本标准适用于车载电路的最大工作电压低于660V(AC)或1000V(DC)的电动乘用车。 制冷剂为其它类型的空调系统可参照使用。
General technical requirements for air-conditioning systems for electric passenger vehicles
- ICS
- 43.080.01
- CCS
- T47
- 发布
- 2014-12-02
- 实施
- 2015-03-02
本标准规定了电动汽车非车载充电设备用直流电能表（以下简称电能表）的技术要求、试验方法和检验规则。 本标准适用于电能表的型式检验、出厂检验。
DC energy meter for electric vehicle charging equipment
- ICS
- 43.080.01
- CCS
- T47
- 发布
- 2014-12-02
- 实施
- 2015-03-02
本标准规定了电动汽车用密封金属氢化物镍蓄电池（以下简称“蓄电池”）的测试要求和方法。 本标准适用于电动汽车用密封金属氢化物镍蓄电池单体和模块。
Test procedures for nickel metal hydride batteries for electric vehicles
- ICS
- 43.080.01
- CCS
- T47
- 发布
- 2014-12-02
- 实施
- 2015-03-02
本标准规定了电动汽车用高压电器箱一般要求、安全要求、组装要求、运输与储存等通用技术要求。 本标准适用于电动汽车上电池箱内置或外置的高压电器箱。
General technical requirements for high-voltage electrical boxes for electric vehicles
- ICS
- 43.080.01
- CCS
- T47
- 发布
- 2014-12-02
- 实施
- 2015-03-02
Heavy commercial vehicles and buses. Stopping distance in straight-line braking with ABS. Open loop and closed loop test methods
- ICS
- 43.080.01
- CCS
- T43;T42
- 发布
- 2014-07-31
- 实施
- 2014-07-31
This International Standard describes test methods for determining the stopping distance during a straight-line braking manoeuvre with the braking system fully operational. It applies to heavy vehicles equipped with an anti-lock braking system (ABS), including commercial vehicles, commercial vehicle combinations, buses and articulated buses as defined in ISO 3833 (trucks and trailers with maximum weight above 3,5 tonnes and buses and articulated buses with maximum weight above 5 tonnes, according to ECE and EC vehicle classification, categories M3, N2, N3, O3, and O4).
Heavy commercial vehicles and buses - Stopping distance in straight-line braking with ABS - Open loop and closed loop test methods
- ICS
- 43.080.01
- CCS
- T24
- 发布
- 2014-07
- 实施
Road vehicles. Heavy commercial vehicle combinations and articulated buses. Lateral stability test methods
- ICS
- 43.080.01
- CCS
- T43
- 发布
- 2014-02-28
- 实施
- 2014-02-28
Road vehicles. Heavy commercial vehicle combinations and articulated buses. Lateral stability test methods
- ICS
- 43.080.01
- CCS
- T43
- 发布
- 2014-02-28
- 实施
- 2014-02-28
Road vehicles. Product data exchange between chassis and body work manufacturers (BEP). Coding of loader crane bodywork
- ICS
- 43.080.01
- CCS
- T21
- 发布
- 2014-01-31
- 实施
- 2014-01-31
manufacturers and bodywork manufacturers. It applies to commercial vehicles as defined in ISO 3833, having a maximum gross vehicle mass above 3500 kg. The process of exchanging the above information can involve — chassis manufacturers, — chassis importers, — chassis dealers, — one or more bodywork manufacturers, and — bodywork component suppliers, e.g. manufacturers of demountable bodies, cranes and loading equipment, and tipping equipment. This part of ISO 21308 specifically describes the coding dimensions and other characteristics of loader cranes and auxiliary stabilizers, to ensure an efficient and unambiguous communication of installation data between the parties involved. This part of ISO 21308 covers loader cranes as specified in ISO 15442, designed to be fitted on commercial vehicles (including trailers). This part of ISO 21308 is not applicable to other load-lifting systems (e.g. tail lifts, hook loader systems).
Road vehicles - Product data exchange between chassis and body work manufacturers (BEP) - Part 5: Coding of loader crane bodywork
- ICS
- 43.080.01
- CCS
- J80
- 发布
- 2014-01
- 实施
This part of ISO 15037 specifies the general conditions that apply when vehicle dynamics properties are determined according to ISO test methods carried out on heavy vehicles. These are commercial vehicles, combinations, buses and articulated buses, as defined in ISO 3833 for trucks and trailers above 3,5 t and buses above 5 t maximum weight, and in UNECE (United Nations Economic Commission for Europe) and EC vehicle classification, categories M3, N2, N3, O3 and O4. In particular, it specifies general conditions for — variables, — measuring equipment and data processing, — environment (test track and wind velocity), — test vehicle preparation (tuning and loading), — initial driving, and — test reporting (general data and test conditions), which are of general significance, independent of the specific vehicle dynamics test procedure. They apply when vehicle dynamics properties are determined, unless other conditions are required by the standard actually used for the test method. NOTE The general conditions defined in existing vehicle dynamics standards are valid up until the point when a respective reference to this part of ISO 15037 is included.
Road vehicles -- Vehicle dynamics test methods -- Part 2: General conditions for heavy vehicles and buses
- ICS
- 43.080.01
- CCS
- 发布
- 2013-12-31
- 实施
本标准规定了纯电动改装车的术语、定义、基本要求、试验与检验、标志和贮存。 本标准适用于纯电动改装车。
General technical requirements for pure electric modified vehicles
- ICS
- 43.080.01
- CCS
- T 47
- 发布
- 2013-09-16
- 实施
- 2013-12-16
本标准规定了座位数在5座及以下的短途纯电动乘用车技术要求。 本标准适用于使用动力蓄电池驱动的短途纯电动乘用车。
General technical requirements for short-distance pure electric passenger vehicles
- ICS
- 43.080.01
- CCS
- T 47
- 发布
- 2013-09-16
- 实施
- 2013-12-16
本规范规定了电动汽车示范运行的基本条件、准备工作、实际运行的控制等相关要求。 本规范适用于电动汽车(不含燃料电池汽车)在规定区域或指定道路上进行的示范运行。
Electric Vehicle Demonstration Operation Specifications
- ICS
- 43.080.01
- CCS
- T 47
- 发布
- 2013-09-16
- 实施
- 2013-12-16
本标准规定了增程式电动乘用车的术语和定义、技术要求和试验方法。 本标准适用于装有增程器且具有外接充电口，其车辆行驶系统的驱动力只来源于驱动电机的增程式电动乘用车。
General technical requirements for extended-range electric passenger vehicles
- ICS
- 43.080.01
- CCS
- T 47
- 发布
- 2013-09-16
- 实施
- 2013-12-16
