P94 金属设备与工艺管道安装工程 标准查询与下载
共找到 770 条与 金属设备与工艺管道安装工程 相关的标准，共 52 页
This part of EN 13480 covers the requirements for materials (including clad materials) for industrial piping and supports covered by EN 13480-1 constructed of metallic materials and is currently limited to steels with sufficient ductility below the creep range. It specifies the assessment of compliance for these materials. It also provides rules for the establishment of technical delivery conditions for materials for industrial piping.
Metallic industrial piping - Part 2: Materials; German version EN 13480-2:2017
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2017-12-01
- 实施
The purpose of EN 13480 is to define the requirements for design, manufacture, installation, testing and inspection of industrial piping systems and supports, made of metallic materials with a view to ensure safe operation. EN 13480 is applicable to metallic piping above ground, ducted or buried, independent of pressure.
Metallic industrial piping - Part 1: General; German version EN 13480-1:2017
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2017-12-01
- 实施
This Part of this European Standard specifies the design and calculation of industrial metallic piping systems, including supports, covered by EN 13480.
Metallic industrial piping - Part 3: Design and calculation; German version EN 13480-3:2017
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2017-12-01
- 实施
This standard is intended to be used for rubber and plastic hose assemblies of the types: 1ST, 1SN, 2ST and 2SN according to DIN EN 853, 1TE, 2TE and 3TE according to DIN EN 854, 4SP, 4SH, R13 according to DIN EN 856, R15 according to ISO 3862 and 1SC and 2SC according to DIN EN 857 as well as plastic hoses assemblies of the types R7, R8 and R18 according to ISO 3949, appropriate for temperatures of -40° C up to + 100° C (hose types R13 and R 15 to 120°C) and hose connectors of the light and heavy duty series according to DIN ISO 12151-2 and DIN ISO 12151-3. This standard contains information about the most important criteria for selection and reference of hoses and connectors, the installation and connection dimensions as well as the requirements for the installation of hose assemblies. The comparative presentation of respective hoses types in Table 1 and Table 2 gives designers guidelines for the selection of hoses (nominal diameter and design) and their appropriate connectors, in case the piping of a system has already been determined. Further, guidelines are given in this standard for storage, life cycle and necessary inspections to ensure the full functionality of those assemblies.
Hydraulic fluid power - Hose assemblies - Dimensions, requirements
- ICS
- 23.100.40
- CCS
- P94
- 发布
- 2017-11-01
- 实施
Classification and information on design and applications of plastics piping systems used for renovation and replacement
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2017-11-00
- 实施
This part of EN 13480 describes the requirements for the design and calculation of industrial metallic piping systems, including supports.
Metallic industrial piping - Part 3: Design and calculation; German version EN 13480-3:2012/A1:2017
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2017-11-00
- 实施
Metallic industrial piping. Inspection and testing
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2017-09-29
- 实施
- 2017-09-30
Metallic industrial piping. Fabrication and installation
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2017-09-22
- 实施
- 2017-09-30
Metallic industrial piping. Additional requirements for aluminium and aluminium alloy piping
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2017-09-22
- 实施
- 2017-09-30
Metallic industrial piping. General
- ICS
- 23.040.01;23.040.03
- CCS
- P94
- 发布
- 2017-09-21
- 实施
- 2017-09-30
Metallic industrial piping. Additional requirements for buried piping
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2017-09-19
- 实施
- 2017-09-30
Metallic industrial piping - Part 5: Inspection and testing; German version EN 13480-5:2012/A3:2017
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2017-07
- 实施
Metallic industrial piping - Part 4: Fabrication and installation; German version EN 13480-4:2012/A4:2017
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2017-07
- 实施
This document specifies a method for the determination of constituent materials of a test sample cut from a glass-reinforced plastics (GRP) component intended for use in a piping system. It includes determination of resin, glass, aggregate and filler contents. It is also applicable to the determination of the type and arrangement of the reinforcements. If used to determine the amounts of constituent materials in layered constructions it may be necessary to separate the laminate layers by cutting or splitting and testing each separately.
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents
- ICS
- 23.040.20;23.040.45
- CCS
- P94
- 发布
- 2017-06
- 实施
Construction quality acceptance specifications for oil and gas construction projects High hydrogen sulfide gas field gathering and transportation station projects
- ICS
- 75.200
- CCS
- P94
- 发布
- 2017-03-28
- 实施
- 2017-08-01
Construction Quality Acceptance Specification for Oil and Gas Construction Projects Road Engineering
- ICS
- 75.200
- CCS
- P94
- 发布
- 2017-03-28
- 实施
- 2017-08-01
Construction Quality Acceptance Specification for Oil and Gas Construction Projects High Hydrogen Sulfide Gas Field Gathering and Transportation Pipeline Projects
- ICS
- 75.200
- CCS
- P94
- 发布
- 2017-03-28
- 实施
- 2017-08-01
本标准规定锥螺纹连接式薄壁不锈钢管材及管件的术语与定义、锥螺纹基本尺寸、分类和标记、结构型式与尺寸、技术要求、试验方法、检验、标志、包装、运输和贮存、质量证明书。 本标准适用于公称通径不大于200mm、公称压力不大于1.6MPa的输送饮用净水、生活饮用水、热水等管道用锥螺纹薄壁不锈钢管材及管件的设计、制造和验收，其他如海水、燃气、医用气体和消防用水等管道亦可参照使用。
Taper thread connection type thin-walled stainless steel pipes and fittings
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2017-03-10
- 实施
- 2017-06-10
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes
- ICS
- 23.040.20;91.140.60
- CCS
- P94
- 发布
- 2017-02
- 实施
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings
- ICS
- 23.040.45;91.140.60
- CCS
- P94
- 发布
- 2017-02
- 实施
