P94 金属设备与工艺管道安装工程 标准查询与下载
共找到 770 条与 金属设备与工艺管道安装工程 相关的标准，共 52 页
Construction and testing of drains and sewers; German version EN 1610:2015
- ICS
- 93.030
- CCS
- P94
- 发布
- 2015-12
- 实施
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005 + Amd 1:2015); German version EN ISO 10931:2005 + A1:2015
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2015-11
- 实施
This European Standard is applicable to the construction and related testing of drains and sewers usually buried in the ground and usually operating under gravity but up to 0,5 kPa when surcharged. The construction of pipelines operating under pressure is covered by this European Standard together with EN 805 as appropriate (e. g. for testing). This European Standard is applicable to drains and sewers installed in trenches, under embankments or above ground. For trenchless construction EN 12889 applies. Additionally, other local or national regulations may apply, e. g. concerning health and safety, pavement reinstatement and requirements for tightness testing. NOTE Further information is given by reference to national documents listed in Annex D.
Construction and testing of drains and sewers
- ICS
- 93.030
- CCS
- P94
- 发布
- 2015-09-01
- 实施
本标准适用于燃气用聚乙烯管道新建、改建、扩建安装工程的监督检验
Supervision and inspection rules for the installation of polyethylene pipes for gas
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2015-06-30
- 实施
- 2015-08-01
Pipework. Corrugated metal hose assemblies for combustible gas. Performance requirements, testing and marking
- ICS
- 23.040.70
- CCS
- P94
- 发布
- 2015-04-30
- 实施
- 2015-04-30
Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships
- ICS
- 23.040.20;23.040.45;23.060.01
- CCS
- P94
- 发布
- 2015-03-31
- 实施
- 2015-03-31
Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending
- ICS
- 23.040.60
- CCS
- P94
- 发布
- 2015-03-31
- 实施
- 2015-03-31
Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
- ICS
- 23.040.20
- CCS
- P94
- 发布
- 2015-03-17
- 实施
This Standard provides requirements for evaluating the suitability of materials used in piping systems for piping that may be subject to brittle failure due to low-temperature service conditions.
Standard Toughness Requirements for Piping
- ICS
- CCS
- P94
- 发布
- 2015
- 实施
- 2016-08-12
ASME B31.1 prescribes minimum requirements for the design, materials, fabrication, erection, test, inspection, operation, and maintenance of piping systems typically found in electric power generating stations, industrial and institutional plants, geothermal heating systems, and central and district heating and cooling systems. It also covers boiler-external piping for power boilers and high-temperature, high pressure water boilers in which steam or vapor is generated at a pressure of more than 15 psig; and high temperature water is generated at pressures exceeding 160 psig and/or temperatures exceeding 250 degrees F. Key changes to this revision include: Now mandatory: rules for nonmetallic piping and piping lined with nonmetals; Cold-forming rules for creep strength enhanced ferritic steels have been incorporated into Chapter V Fabrication, Assembly, and Erection; Chapter VII Operation and Maintenance revised to include requirements for: documentation of dynamic events piping and pipe-support maintenance programs and personnel requirements; Preheat and post-weld heat treatment rules have been reformatted into tabular form for clarity. It is the owner?s responsibility to select the B31 Code Section(s) that apply to a proposed piping installation. For some installations, more than one Code Section in the B31 series may apply to different parts of a piping system or to different parts of the installation. ASME B31.1 is one of ASME?s most requested codes, widely adopted by jurisdictions worldwide. It is prominently referenced in ASME?s Boiler and Pressure Vessel Code, Section I. This Code serves as a companion to ASME?s B31.3 Code on Process Piping as well as to the other codes in ASME?s B31 series. Together, they remain essential references for anyone engaged with piping.
Power Piping (B31.1 - 2014)
- ICS
- CCS
- P94
- 发布
- 2014/8/11
- 实施
ASME B31.9 has rules for piping in industrial, institutional, commercial and public buildings, and multi-unit residences, which does not require the range of sizes, pressures, and temperatures covered in ASME?s B31.1 Code for Power Piping. It includes piping systems either in the building or within the property limits. Key changes to this revision include updating referenced specifications and adding new thermoplastic pipe materials. This Code prescribes comprehensive solutions for the design, materials, fabrication, installation, inspection, examination and testing of piping systems for building services. It joins with ASME?s many other safety standards governing the building and construction industry, including the A17 series on elevators and escalators; the B30 series on cranes, hoists and lifts; and the A112 series on plumbing. B31.9 also serves as a companion to ASME?s other B31 codes on piping systems. Together, they remain essential references for anyone engaged with piping.
Building Services Piping (B31.9 - 2014)
- ICS
- CCS
- P94
- 发布
- 2014/4/28
- 实施
Metallic industrial piping - Part 5: Inspection and testing; German version EN 13480-5:2012
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2014-12
- 实施
Metallic industrial piping - Part 6: Additional requirements for buried piping; German version EN 13480-6:2012
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2014-12
- 实施
Metallic industrial piping - Part 4: Fabrication and installation; German version EN 13480-4:2012
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2014-12
- 实施
Metallic industrial piping - Part 3: Design and calculation; German version EN 13480-3:2012
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2014-12
- 实施
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping; German version EN 13480-8:2012
- ICS
- 23.040.15
- CCS
- P94
- 发布
- 2014-12
- 实施
Metallic industrial piping - Part 1: General; German version EN 13480-1:2012
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2014-12
- 实施
Metallic industrial piping - Part 2: Materials; German version EN 13480-2:2012
- ICS
- 23.040.01
- CCS
- P94
- 发布
- 2014-12
- 实施
The ASME Pipeline Standards Compendium is intended to aid users of the pipeline safety regulations promulgated by Parts 192, 193, and 195 of Title 49 of the U.S. Code of Federal Regulations. It describes each referenced ASME standard in plain language and also provides relevant technical excerpts. The ASME Pipeline Standards Compendium is not intended to be a complete standard covering all aspects of piping safety and should not be considered a substitution for the application of sound engineering judgment. Users are encouraged to refer to the most recent edition of the applicable ASME standard for additional information.
ASME Pipeline Standards Compendium
- ICS
- CCS
- P94
- 发布
- 2014-11-19
- 实施
- 2014-11-26
