GB/T 3883.1-2014
Safety of motor-operated hand-held, transportable electric tools and lawn and garden tools.Part 1:General requirements

Standard No.

GB/T 3883.1-2014

Language

Chinese

Release Date

2014

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Lastest

GB/T 3883.1-2014

Replace

GB 13960.1-2008 GB 3883.1-2008

Scope

This part of GB 3883 deals with electric motor or electromagnet drive: -- Hand-held electric tools (Part 2); -- Portable electric tools (Part 3); -- Garden tools (Part 4). Hereinafter referred to as "Tool". The rated voltage of AC single-phase or DC tools is not greater than 250 V, and the rated voltage of AC three-phase tools is not greater than 440 V. The maximum rated input power does not exceed 3 700 W. This section deals with the hazards caused by tools that people encounter during normal operation and reasonably foreseeable use of tools. Tools with electric heating elements are within the scope of this standard. The requirements for these heating elements are specified in the relevant parts of GB 4706. For motors that are not isolated from the grid and whose basic insulation is not designed according to the rated voltage of the tool, the requirements are specified in Appendix B. For electric motor-driven or solenoid-driven tools powered by rechargeable batteries and battery packs for these tools, the requirements are specified in Appendix K. For such tools that can be operated and/or charged directly from the mains or non-isolated power supply, the requirements are specified in Appendix L. Hand-held power tools that can be mounted to a stand or workbench as a stationary tool without any modifications to the tool itself fall within the scope of this Part and are regulated by Part 3. This section does not apply to: - tools used in explosive atmospheres (dust, vapor or gas); - tools for preparing and processing food; - tools for medical use; - tools used with cosmetics and pharmaceuticals; - heating tools; - household or similar electrical appliances driven by electric motors; - electrical equipment for industrial machine tools; - small bench-top tools driven by low-voltage transformers for making models, such as remote-controlled airplane models or car models, etc.

GB/T 3883.1-2014 Referenced Document

• GB 1002-2008 Types, basic parameters and dimensions of single-phase plugs and sockets for household and similar purposes
• GB 1003-2008 Three phases plugs and socket-outlets for household and similar purposes.Types, basic parameters and dimensions
• GB 2099.1 Plugs and sockets for household and similar purposes - Part 1: General requirements
• GB 2099.2 Plugs and socket.outlets for household and similar purposes.Part 2:Particular requirements for socket-outlets for appliances
• GB 2099.3 Plugs and socket-outlets for household and similar purposes.Part 2-5:Particular requirements for adaptors*， 2015-10-13 Update
• GB 2099.4 Plugs and socket-outlets for household and similar purposes.Part 2:Particular requirements for switched socket-outlets without interlock for fixed installations
• GB 2099.5 Plugs and socket-outlets for household and similar purposes.Part 2:Particular requirements for switched socket-outlets with interlock for fixed installations
• GB 2099.6 Plugs and socket-outlets for household and similar purposes.Part 2:Particular requirements for fused plugs
• GB 2099.7 Plugs and socket-outlets for household and similar purposes.Part 2-7:Particular requirements for cord extension sets*， 2015-10-13 Update
• GB 2099.8 *， 2017-07-31 Update
• GB 3667 A.C.motor capacitors
• GB 4208-2008 Degrees of protection provided by enclosure(IP code)
• GB 4706.1-2005 Household and similar electrical appliances-Safety Part 1:General requirements
• GB/T 1406.1-2008 Types and dimensions of lamp caps.Part 1:Screw caps
• GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without individual tolerance indications
• GB/T 2423.55-2006 Environmental testing for electric and electronic products.Part 2:Test methods.Test Eh:Hammer tests
• GB/T 2893.2-2008 Graphical symbols.Safety colours and safety signs.Part 2:Design principles for product safety labels
• GB/T 2893.3 Graphical symbols.Safety colours and safety signs.Part 3:Design principles for graphical symbols for use in safety signs
• GB/T 3956-2008 Conductors of insulated cables
• GB/T 4956-2003 Non-magnetic coatings on magnetic substrates--Measurement of coating thickness-Magnetic method
• GB/T 5013.4-2008 Rubber insulated cables of rated voltages up to and including 450/750 V.Part 4: Cords and flexible cables
• GB/T 5023.5-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V.Part 5:Flexible cables(cords)
• GB/T 5169.11-2006 Fire hazard testing for electric and electronic products.Part 11:Glowing/hot-wire based test methods.Glow-wire flammability test method for end-products
• GB/T 5169.13-2013 Fire hazard testing for electric and electronic product.Part 13:Glowing/hot-wire based test methods.Glow-wire ignition temperature (GWIT) test method for materials

GB/T 3883.1-2014 history

• 2014 GB 3883.1-2014 Safety of motor-operated hand-held, transportable electric tools and lawn and garden tools.Part 1:General requirements
• 2012 GB 3883.11-2012 Safety of hand-held motor-operated electric tools.Part 2:Particular requirements for reciprocating saws(jig and sabre saws)
• 2008 GB 3883.1-2008 Safety of hand-held motor-operated electric tools.Part 1:General requirements
• 2005 GB 3883.11-2005 Safety of hand-held motor-operated electric tools-Part 2:Particular requirements for reciprocating saws(Jig and Sabre Saws)
• 2000 GB 3883.1-2000 Safety of hand-held motor-operated electric tools-Part 1:General requirements
• 1991 GB 3883.11-1991 Safety of hand-held motor-operated electric tools--Part 11: Particular requirements for electric reciprocating saws (jig and sabre saws)

GB/T 3883.1-2014 Safety of motor-operated hand-held, transportable electric tools and lawn and garden tools.Part 1:General requirements has been changed from GB 13960.1-2008 Safety of transportable motor operated electric tools.Part 1: General requirements.

GB/T 3883.1-2014 Safety of motor-operated hand-held, transportable electric tools and lawn and garden tools.Part 1:General requirements has been changed from GB 3883.1-2008 Safety of hand-held motor-operated electric tools.Part 1:General requirements.

GB/T 3883.1-2014 -All Parts