共找到 249 条与 石油勘探、开发、集输设备综合 相关的标准,共 17 页
Recommended practice for evaluation of corroded pipelines
Specification for steel butt weld fittings
Drop weight tear test method for pipeline steel pipes
X-ray fluorescence logging instrument calibration method
Comprehensive logging tool calibration method Part 4: Infrared gas analyzer
General technical conditions for potentiostats
本标准适用于居民用户和供气压力<0.01MPa的非居民用户使用的燃气用户设施的安全检查。
Technical requirements for safety inspection of gas user facilities
Petroleum and natural gas industries. Offshore platforms handling streams with high content of CO2 at high pressures
本标准规定了自然伽马刻度器校准的技术要求、校准设备、校准条件、校准方法和复校时间间隔。 本标准适用于新制造、使用中和修理后的刻度器的校准。
The calibration method of Gamma-ray calibrator
本标准规定了中子寿命测井仪的技术要求、校准条件、校准项目、校准方法和复校时间间隔。 本标准适用于新投产、使用中和维修后的中子寿命测井仪的校准。
The calibration for neutron lifetime logging tool
本标准规定了抽油机井综合测试仪的技术要求、校准条件、校准项目和校准方法。 本标准适用于新制造、使用中和维修后的抽油机井综合测试仪(简称“综合测试仪”)的校准。
Calibrating method for intrument of testing pumping unit
本标准规定了以C型弹簧管为感压元件、利用指针在标度盘上指示其值的机械式石油钻修井指重表(以下简称指重表)的技术要求、校准条件、校准项目和校准方法。 本标准适用于新制造、使用中和修理后的指重表的校准。
Calibration specification for the petroleum drilling/workover weight indicating system
本标准规定了钻井液高温高压滤失量测试仪的计量特性、校准条件、校准方法、校准结果和校准间隔。 本标准适用于新制造、使用中和修理后的钻井液高温高压滤失量测试仪(以下简称为高温高压滤失仪)的校准。
Calibration method of HTHP drilling fluid filter press
本标准规定了检波器测试仪检定装置的校准条件、校准项目及校准方法。 本标准适用于新制造、使用中和修理后检波器测试仪检定装置(以下简称“检定装置”)的校准。
Calibrating method for calibration device of geophone tester
本标准规定了石油专用计量器具校准方法(以下简称“校准方法”)的编写原则、结构、内容和方法。 本标准适用于石油专用计量器具校准方法的编写。
The drafting rules for calibration method of measuring instrument for oil industry
本标准规定了石油测井领域的补偿中子刻度器校准的技术要求、校准设备、校准条件、校准方法和复校时间间隔。 本标准适用于新投产、使用中和修理后的补偿中子刻度器的校准。
The calibration method of neutron calibrator
本标准规定了石油测井补偿中子测井仪的技术要求、校准条件、校准项目、校准方法、校准结果和复校时间间隔。 本标准适用于新投产、使用中和修理后的补偿中子测井仪(以下简称“测井仪”)的校准。
The calibration method of neutron tool
本标准规定了工厂制造碳钢和低合金钢无缝和焊接对焊管件的材料、设计、规格、制造检验及标志的基本要求。 本标准包括弯头、三通、管帽、拔制汇管、异径管接头以及在工厂内焊接的加长段和过渡段。 本标准适用于油气输送管道用公称直径不大于DN1500的钢制对焊管件。 经供需双方协议,可制造特殊尺寸、形状、公差的钢制管件;当采用本标准以外的材料时,应符合相应的材料规范要求。当此类管件满足本标准所有其他规定时,应被认为是部分符合本标准的管件,但应对其做适当标记。
Specification for high-test wrought butt-welding fittings
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons (ISO 15156-2:2015); German version EN ISO 15156-2:2015
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials; (ISO 15156-1:2015) German version EN ISO 15156-1:2015
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号