E90 石油勘探、开发、集输设备综合 标准查询与下载

DIN EN ISO 15156-2:2015 石油和天然气工业.油,气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳钢和低合金钢及铸铁的使用(ISO 15156-2-2015).德文版本EN ISO 15156-2-2015

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons (ISO 15156-2:2015); German version EN ISO 15156-2:2015

DIN EN ISO 15156-3:2015 石油和天然气工业.油,气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(防腐蚀合金)和其他合金(ISO 15156-3-2015).德文版本EN ISO 15156-3-2015

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015); German version EN ISO 15156-3:2015

ISO 17292:2015 石油、石化和相关工业用金属球阀

Metal ball valves for petroleum, petrochemical and allied industries

BS EN ISO 15156-1:2015 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.耐裂化材料选择的一般原则

Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. General principles for selection of cracking-resistant materials

BS EN ISO 15156-3:2015 石油、石化和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.耐裂化CRAs(耐腐蚀合金)和其他合金

Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

BS EN ISO 15156-2:2015 石油、石化和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.耐裂化碳和低合金钢及铸铁的使用

Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking-resistant carbon and low alloy steels, and the use of cast irons

ISO 16903:2015 石油和天然气工业. 液化天然气影响设计和材料选择的特性

This International Standard gives guidance on the characteristics of liquefied natural gas (LNG) and the cryogenic materials used in the LNG industry. It also gives guidance on health and safety matters. It is intended to act as a reference document for the implementation of other standards in the liquefied natural gas field. It is intended as a reference for use by persons who design or operate LNG facilities.

Petroleum and natural gas industries - Characteristics of LNG, influencing the design, and material selection

BS PD ISO/TS 16901:2015 包括船/岸上支持接口的陆上液化天然气装置风险评估设计执行指南

Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface

ISO 13354:2014 石油和天然气工业. 钻井和生产设备. 浅层油气分流设备

This International Standard specifies requirements for the selection of the diverter equipment for rigs used to drill shallow-gas-bearing formations. It covers both onshore and offshore drilling operations, and considers also the auxiliary equipment associated with floating rigs. The specified requirements concern the following diverter equipment: — annular sealing devices; — vent outlets; — diverter valves; — diverter piping. This International Standard highlights the concerns associated with the selection of a marine floating drilling support. It covers safety issues concerning key rig equipment, and important steps of action required prior to starting the drilling operations. It provides only general guidelines regarding the response to be given to a shallow-gas flow.

Petroleum and natural gas industries - Drilling and production equipment - Shallow gas diverter equipment

ISO 27627:2014 石油和天然气工业. 铝合金钻杆螺纹连接测量

This International Standard specifies the technical delivery condition, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes manufactured in accordance with ISO 15546. This International Standard also specifies the gauging procedure for taper buttress thread (right and left) and adjoining tapered stabilizing shoulders (bores) made of aluminium alloy drill pipes and related steel tool joints.

Petroleum and natural gas industries - Aluminium alloy drill pipe thread connection gauging

SY/T 6978-2014 钻井液旋转枯度计校准方法

本标准规定了钻井液旋转黏度计(以下简称黏度计)的技术要求、校准条件、校准项目和校准方法。本校准适用于新制造、使用中和修理后的黏度计的校准。

The calibration method of the drilling fluid rotary viscometer

SY/T 6679.1-2014 综合录井仪校准方法第1部分:传感器

SY/T 6679的本部分规定了综合录井仪脉冲式绞车传感器、接近开关传感器、靶式流量传感器、压力传感器、霍尔效应扭矩传感器、电导率传感器、超声波式体积传感器、密度传感器、温度传感器、硫化氢传感器的校准方法。本部分适用于新制造、使用中和修理后的综合录井仪脉冲式绞车传感器、接近开关传感器、靶式流量传感器、压力传感器、霍尔效应扭矩传感器、电导率传感器、超声波式体积传感器、密度传感器、温度传感器、硫化氢传感器的校准。

Calibration method of mud-logging unit.Part 1: Sensors

SY/T 6976-2014 井径规校准方法

本标准规定了井径规的技术要求、校准条件、校准项目和校准方法、校准结果及复校时间间隔。本标准适用于新制造、使用中和修理后的单体式内径不大于500mm、复合式最大内径不大于600mm的井径规的校准。

Calibration methods of caliper rings

SY/T 6977-2014 注水井分层流量实时测调仪校准方法

本标准规定了注水井分层流量实时测调仪(以下简称测调仪)的技术要求和校准方法。本标准适用于新制造、使用中和维修后的注水井井下分层流量实时测调仪的校准。

The calibration method of real-time measuring and adjusting instrument of flooding well's layered flux

NF M87-257*NF EN ISO 14998:2014 石油和天然气工业. 钻孔设备. 完工配件

La présente Norme internationale spécifie les exigences et fournit les lignes directrices relatives aux accessoires de complétion, tels que définis ci-après, destinés à être utilisés dans les industries du pétrole et du gaz naturel. La présente Norme internationale fournit les exigences relatives aux spécifications fonctionnelles et techniques pour la conception, la vérification et la validation de la conception, les matériaux, la maîtrise des documents et des données, la remise en état, la réparation, l'expédition et le stockage. La présente Norme internationale traite des fonctionnalités de confinement de la pression, de résistance à la charge, de déconne

Petroleum and natural gas industries - Downhole equipment - Completion accessories

ISO 13503-6:2014 石油和天然气工业. 完井液和材料. 第6部分: 在动态条件下测量完井液泄露量的程序

Petroleum and natural gas industries - Completion fluids and materials - Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions

DIN EN 16423:2014 液化石油气. 溶解残留物的测定. 使用液相柱头进样的气相色谱法; 德文版本EN 16423-2013

Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection; German version EN 16423:2013

DIN CEN ISO/TR 13624-2:2013 石油和天然气工业. 钻井和生产设备. 第2部分: 深海钻井隔水管方法, 操作和完整技术报告(ISO/TR 13624-2-2009); 英文版本CEN ISO/TR 13624-2-2013

Petroleum and natural gas industries - Drilling and production equipment - Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report (ISO/TR 13624-2:2009); English version CEN ISO/TR 13624-2:2013

SY/T 6476-2013 管线钢管落锤撕裂试验方法

本标准规定了管线钢管落锤撕裂试验的定义、符号、设备、试样、试验、评定和报告等内容。本标准适用于管线钢管和制管用钢板、板卷的落锤撕裂试验和结果评定。

Practice for drop-weight tear tests on steel line pipe

SY/T 0540-2013 石油工业用加热炉型式与基本参数

本标准规定了石油工业用加热炉的型式分类、参数系列、系列型谱,并规定了产品型号的编制方法。本标准适用于陆上石油工业用火筒式加热炉和管式加热炉,以下简称加热炉。

Type and basal parameters for heater used in petroleum industry