T21 传动系统 标准查询与下载
共找到 219 条与 传动系统 相关的标准，共 15 页
本标准规定了汽车自动变速器油泵的术语及定义、性能要求及台架试验方法。 本标准适用于为乘用车汽车自动变速器提供液压和润滑的油泵，不包含电控油泵。
Performance requirements and bench test methods of automatic transmission oil pump
- ICS
- 43.040.50
- CCS
- T21
- 发布
- 2016-01-15
- 实施
- 2016-07-01
本标准规定了汽车变速换挡操纵装置的性能要求、台架试验方法。 本标准适用于各种类型的汽车变速换挡操纵装置（不包含杆系和软轴）。
Performance requirements and bench test methods of automobile gear shifting control device
- ICS
- 43.040.50
- CCS
- T21
- 发布
- 2015-10-10
- 实施
- 2016-03-01
本标准规定了汽车等速万向节及其总成的试验方法。本标准适用于汽车等速万向节及其总成的试验。
Test methods for constant velocity universal joint and assemblies for automobiles
- ICS
- 43.040.50
- CCS
- T21
- 发布
- 2015-10-10
- 实施
- 2016-03-01
Road vehicles — Commercial vehicles — Couplings between power take-offs(PTO) and ancillary driven units
- ICS
- 43.040.50
- CCS
- T21
- 发布
- 2015-10-01
- 实施
本标准规定了乘用车自动变速器用过滤器的术语和定义、要求、试验方法和检验规则以及标志、包装、运输和储存。 本标准适用于乘用车自动变速器用过滤器(以下简称过滤器)。
Specifications of passenger car automatic transmission filters
- ICS
- 43.040.50
- CCS
- T21
- 发布
- 2015-07-14
- 实施
- 2016-01-01
本标准规定了离合器液压气助力系统总泵(以下简称总泵)的技术要求、试验方法。 本标准适用于汽车用离合器液压气助力系统总泵。
Technical requirements and bench test methods for hydraulic air-assistant system master cylinder of clutch
- ICS
- 43.040.50
- CCS
- T21
- 发布
- 2015-07-14
- 实施
- 2016-01-01
本标准规定了离合器液压气助力系统助力器(以下简称助力器)的产品分类、技术要求、试验方法。 本标准适用于汽车用离合器液压气助力系统助力器。
Technical requirements and bench test methods for hydraulic air-assistant system booster of clutch
- ICS
- 43.040.50
- CCS
- T21
- 发布
- 2015-07-14
- 实施
- 2016-01-01
Vehicles. Cardan gears of vehicles with joints of unequal angle speeds. General specifications
- ICS
- 43.040.50
- CCS
- T21
- 发布
- 2015
- 实施
- 2017-04-01
Motor vehicles. Wheel disc. Technical requirements and test methods
- ICS
- 43.040.60
- CCS
- T21
- 发布
- 2015
- 实施
- 2017-04-01
本标准规定了汽车变速器齿轮使用激光焊接和电子束焊接的工艺要求、方法及检验规则。本标准适用于批量生产汽车变速器齿轮的激光焊接和电子束焊接,其他焊接工艺可参照执行。
The specification of laser and electron beam welding for automobile transmission gear
- ICS
- 43.040
- CCS
- T21
- 发布
- 2014-10-14
- 实施
- 2015-04-01
本标准规定了汽车干摩擦式离合器总成(包括盖总成和从动盘总成,以下简称离合器)的术语和定义、技术要求。本标准适用于汽车干摩擦式离合器。
Technical specification of automobile clutch
- ICS
- 43.040.50
- CCS
- T21
- 发布
- 2014-10-14
- 实施
- 2015-04-01
本标准规定了汽车干摩擦式离合器总成(包括盖总成和从动盘总成,以下简称离合器)的台架试验方法。本标准适用于汽车干摩擦式离合器。
Bench test method of automobile clutch
- ICS
- 43.040.50
- CCS
- T21
- 发布
- 2014-10-14
- 实施
- 2015-04-01
本标准规定了汽车机械式变速器总成清洁度检测的方法。本标准适用于汽车机械式变速器总成(以下简称“变速器总成”)清洁度检测。
Measuring method of cleanliness of automobile manual transmission assembly
- ICS
- 43.040
- CCS
- T21
- 发布
- 2014-10-14
- 实施
- 2015-04-01
This recommended practice contains dimensions and tolerances for spindles in the interface area. Interfacing components include axle spindle, bearing cones, bearing spacer, seal and wheel hub. This recommended practice is intended for axles commonly used on Class 7 and 8 commercial vehicles. Included are SAE axle configurations FF, FL, I80, L, N, P, R, U, and W.
Wheel End Assembly and Axle Spindle Interface Dimensions-Truck and Bus
- ICS
- 43.040.50
- CCS
- T21
- 发布
- 2014-07-30
- 实施
- 2014-08-02
This SAE Standard covers hose intended for use with automatic transmission cooling system applications. Type A hoses are intended for original equipment or replacement applications while Type B hoses are intended for aftermarket auxiliary cooler applications only. The reference fluid for tests requiring the use of automatic transmission fluid (ATF) shall be Dexron III / Mercon 5 or equivalent ATF that is agreed to by hose manufacturer and customer.
Transmission Oil Cooler Hose
- ICS
- 43.040.50;43.060.30
- CCS
- T21
- 发布
- 2014-06-04
- 实施
Road vehicles. Product data exchange between chassis and body work manufacturers (BEP). Coding of loader crane bodywork
- ICS
- 43.080.01
- CCS
- T21
- 发布
- 2014-01-31
- 实施
- 2014-01-31
Electric chain hoists. Safety requirements
- ICS
- 53.020.20
- CCS
- T21
- 发布
- 2014
- 实施
- 2016-01-01
本标准规定了汽车离合器分泵总成(以下简称“分泵总成”)的规格、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于汽车用非石油基制动液的液压离合器分泵总成。
Technical specification for automobile clutch slave cylinder assembly
- ICS
- 43.040.70
- CCS
- T21
- 发布
- 2013/12/20
- 实施
- 2013/12/20
Specification for the qualification and labelling of used automotive engines and any related transmission units
- ICS
- 21.020;43.060.01
- CCS
- T21
- 发布
- 2013-10-30
- 实施
- 2013-10-30
This part of ISO 13044 specifies the mechanical, electrical/electronic and pneumatic characteristics of a fully automated fifth wheel coupling system to ensure interchangeability between a tractor vehicle and a coupled semi-trailer(s) with 24 V nominal supply voltage. The two vehicles together constitute an articulated vehicle.
Road vehicles.Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations.Part 2: 50 mm fifth wheel couplings.Electrical and pneumatic interface
- ICS
- 43.040.70
- CCS
- T21
- 发布
- 2013-08
- 实施
