T22 承载系统 标准查询与下载
共找到 313 条与 承载系统 相关的标准，共 21 页
本标准规定了牵引车与全挂车机械连接装置（以下简称机械连接装置）的强度要求和试验方法。 本标准适用于符合GB4781规定的机械连接装置。
Motor vehicles-Drawbar couplings and eyes for hinged drawbars-Strength test
- ICS
- 43.040.50
- CCS
- T22
- 发布
- 1994-05-31
- 实施
- 1995-01-01
本标准规定了汽车悬架用空气弹簧橡胶气囊的产品分类、技术要求、试验方法、检验规则、标志、包装、运输与贮存及其涉及的部分术语。 本标准适用于汽车（含城市用无轨电车）悬架用空气弹簧橡胶气囊，其他车辆用橡胶气囊可参照执行。
Air spring for automotive suspension--Rubber bellows
- ICS
- 43.040.50
- CCS
- T22
- 发布
- 1991-07-12
- 实施
- 1992-03-01
This document specifies the designation, contour and dimensions of 5° tapered (drop-centre) rims primarily intended for passenger cars.
Passenger car tyres and rims - Part 2: Rims
- ICS
- 43.040.50
- CCS
- T22
- 发布
- 2021-10-00
- 实施
This document specifies requirements for the use, general maintenance and safety of wheels and rims including multi-piece wheels and rims. This document defines their out-of-service conditions, such as cracked, worn and bent wheels and rim components. It is applicable to wheels intended for use on road as defined in ISO 3833 and off road vehicles. This document does not include mopeds and motorcycles.
Road vehicles - Wheels and rims - Use, general maintenance and safety requirements and out-of-service conditions
- ICS
- 43.040.50
- CCS
- T22
- 发布
- 2021-10-00
- 实施
Automobile parts -- Wheels -- Contours of rims
- ICS
- 43.040.50
- CCS
- T22
- 发布
- 2021-09-21
- 实施
This document presents a vocabulary of terms related to, and systems for the designation and marking of, wheels and rims intended for use with pneumatic tyres. The intention is to define fundamental wheel and rim terms rather than provide a comprehensive tabulation of all wheel design features. Also specified are the content, location and minimum size of the wheel and rim marking, with the purpose of establishing, on a worldwide basis, a uniform identification system for wheels and rims.
Wheels and rims for pneumatic tyres - Vocabulary, designation and marking
- ICS
- 01.040.43
- CCS
- T22
- 发布
- 2021-06-01
- 实施
Test method for static bending stiffness of automobile wheels
- ICS
- 43.040.50
- CCS
- T22
- 发布
- 2021-03-05
- 实施
- 2021-07-01
Test method for natural frequency of automobile wheels
- ICS
- 43.040.50
- CCS
- T22
- 发布
- 2021-03-05
- 实施
- 2021-07-01
30° impact test method for light alloy wheels of commercial vehicles
- ICS
- 43.040.50
- CCS
- T22
- 发布
- 2019-11-11
- 实施
- 2020-04-01
Biaxial fatigue test method for passenger car wheels
- ICS
- 43.040.50
- CCS
- T22
- 发布
- 2019-11-11
- 实施
- 2020-04-01
Le présent document a pour objectif de déterminer les spécifications dimensionnelles, fonctionnelles et de sécurité des berces interfaces conçues pour être manutentionnées par un bras hydraulique défini dans la norme NF R 17-107, et destinées à recevoir une carrosserie (bennes couvertes par la norme NF R 17-114, plateau, compacteur couverts par la norme NF EN 16486, citerne, etc.) .
Road vehicles - Interface cradle for hydraulic arms - Functional dimensions and general requirements
- ICS
- 43.040.60
- CCS
- T22
- 发布
- 2018-08-11
- 实施
- 2018-08-11
Flatness requirements and detection methods of automobile wheel mounting surfaces
- ICS
- 43.040.50
- CCS
- T22
- 发布
- 2018-05-08
- 实施
- 2018-09-01
Test method for static stiffness of 15° deep groove steel wheels for commercial vehicles
- ICS
- 43.040.50
- CCS
- T22
- 发布
- 2018-05-08
- 实施
- 2018-09-01
This European Standard provides criteria for the selection of whole end-of-life tyres (WELT) under different classes based on their size. It also provides criteria for determination of their suitability to be used in recycling and material recovery processes. The processes described in this document include sorting of WELT in order to determine their acceptance in recovery and recycling processes. Criteria regarding the reuse of tyres to be mounted again in a vehicle are not addressed in this document. This document does not cover the operational performance of the applications or the requirements of the materials for certain applications, which are usually agreed between the manufacturer and the customer. Solid tyres are excluded from the scope of this document.
Materials obtained from end of life tyres - Quality criteria for the selection of whole tyres@ for recovery and recycling processes
- ICS
- 13.030.50;83.160.01
- CCS
- T22
- 发布
- 2017-03
- 实施
This Technical Specification specifies a method for determining the total moisture content of materials obtained from End of Life Tyres (ELT) by drying samples in an oven. The method is applicable to chips, granulates, powders and textile derived from the treatment of End of Life Tyres. This document is not intended for the determination of moisture content in steel wires.
Materials obtained from End of Life Tyres - Determination of specific requirements for sampling and determination of moisture content using the oven-dry method
- ICS
- 13.030.50;83.160.01
- CCS
- T22
- 发布
- 2016-03
- 实施
本标准规定了汽车独立悬架球头销总成性能要求及台架试验方法。 本标准适用于汽车用独立悬架球头销总成。
Perfomance requirements and bench test methods of ball stud assy of automotive suspension
- ICS
- 43.040.50
- CCS
- T22
- 发布
- 2015-10-10
- 实施
- 2016-03-01
Road vehicles. Wheels/rims for commercial vehicles. Test methods
- ICS
- 43.040.50
- CCS
- T22
- 发布
- 2015-08-31
- 实施
- 2015-08-31
Road vehicles. Passenger car wheels for road use. Test methods
- ICS
- 43.040.50
- CCS
- T22
- 发布
- 2015-06-30
- 实施
- 2015-06-30
