GB/T 3811-2008
Design rules for cranes (English Version)

Standard No.

GB/T 3811-2008

Language

Chinese, Available in English version

Release Date

2008

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Latest

GB/T 3811-2008

Replace

GB/T 3811-1983

Scope

This standard establishes the necessary criteria that should be complied with in the design of cranes in general, structure, machinery, electricity and safety, specifies design and calculation requirements and methods, and can be used as a technical basis for design analysis and evaluation. This standard applies to bridge-type cranes, jib-type cranes and cable-type cranes, but does not deal with the special issues of the design of the above-mentioned cranes. This standard can also be used as a reference for other cranes.

GB/T 3811-2008 Referenced Document

• GB 2585 Hot-rolled steel rails for railway
• GB 2893 Safety colours*， 2008-12-11 Update
• GB 2894 Safety signs and guideline for the use*， 2008-12-11 Update
• GB 4208 Degrees of protection provided by enclosure(IP code)
• GB 5226.2 Safety of machinery--Electrical equipment of machines Part 32: Requirements for hoisting machines
• GB 8918 Steel wire ropes for important purposes
• GB/T 10051.1 Lifting hooks.Part 1:Mechanical properties,lifting capacities,stresses and materials*， 2011-01-10 Update
• GB/T 1231 Specifications of high strength bolts with large hexagon head ，large hexagon nuts，plain washers for steel structures
• GB/T 1591 High strength low alloy structural steels*， 2018-05-14 Update
• GB/T 3077 Alloy structure steels*， 2015-12-10 Update
• GB/T 3098.1 Mechanical properties of fasteners.Blots, screws and studs*， 2011-01-10 Update
• GB/T 3098.2 Mechanical properties of fasteners.Nuts*， 2015-12-10 Update
• GB/T 3480 Calculation methods of load capacity for involute cylindrical gears
• GB/T 3633 Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
• GB/T 4205 Basic and safety principles for man-machine interface(MMI),marking and identification.Actuating principles*， 2011-01-14 Update
• GB/T 4942.1 Degrees of protection provided by the integral design of rotating electrical machined (IP code) - Classification
• GB/T 5117 Covered electrodes for manual metal arc welding of non-alloy and fine grain steels*， 2012-11-05 Update
• GB/T 5118 Covered electrodes for manual metal arc welding of creep-resisting steels*， 2012-11-05 Update
• GB/T 5269 Double-pitch precision roller chains,attachments and associated chain sprockets for transmission and conveyors*， 2008-07-01 Update
• GB/T 5293 Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels*， 2018-03-15 Update
• GB/T 699 Quality carbon structure steels*， 2015-12-10 Update
• GB/T 700 Carbon structural steels
• GB/T 8110 Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels*， 2020-11-19 Update
• GB/T 9439 Gray cast iron parts*， 2023-09-07 Update
• GB/T 985 Basic forms and sizes of weld grooves for gas welding manual arc welding and gas--Shielded arc welding
• GB/T 986 Basic forms and sizes of weld grooves for submerged arc welding

GB/T 3811-2008 history

• 2008 GB/T 3811-2008 Design rules for cranes
• 1983 GB/T 3811-1983 Design rules for cranes