共找到 205 条与 电子光学与其他物理光学仪器 相关的标准,共 14 页
本标准规定了各类矿物岩石等地质样品的电子探针定量分析用的标准样品的试样的通用制备方法,其他性质相近的样品也可参照执行。
Methods of mineral and rock specimen preparation for EPMA
本标准规定了用于电子探针分析的金属与合金块状样品的制备方法。适用于电子探针或扫描电镜定量分析用的标准样品和试样。 本标准不包括颗粒度小于5μm或厚度小于4μm的试样。
Method of preparation for samples of metal and alloy in electron probe microanalysis
本标准规定了用扫描电镜测量微米级长度的方法,适用于测量0.5~10μm的长度,也适用于电子探针分析仪测量微米级长度。
Micron grade lenght measurement by SEM
本标准规定了电子显微镜(以下简称电镜)X射线泄漏剂量、试验方法及检验规则。 本标准适用于透射、扫描、反射、透射扫描和电子探针等不同类型的电镜。
The dose of X-rays leakage from electron microscope
本标准规定了包括激光探测器在内的各种应用于100nm至1mm波长范围的激光功率能量测试器件和设备的有关术语定义、检验项目、条件和方法,测量误差和仪器级别以及应满足的最低要求等。
Specification for laser radiation power and energy measuring equipment
本标准规定了金属及合金的电子探针定量分析方法。本标准适用于金属和合金样品立方微米的微区成分分析,分析的元素范围是Na~U,浓度在1%以上。
Qantitative method for electron probe microanalysis of metals and alloys
本标准规定了碳钢和低合金钢中碳的电子探针定量分析方法,它适用于电子探针波谱仪对碳钢和低合金钢中碳的一种定量分析方法,也适当于带波谱仪扫描电镜。
Electron probe quantitative analysis method of carbon in carbon steel and low alloy steel--Sensitivity curve method (detection limit method)
本标准规定了电子探针分析仪的检测条件、技术要求、检测方法、判别原则与检测周期。 本标准适用于使用中、修理后用X射线波长分光谱仪(简称波谱仪)进行元素分析的电子探针分析仪的检测。配有波谱仪的扫描电子显微镜的检测可参照执行。
Method for testing EPMA instrument
本标准规定了电子探针定量分析过程中仪器的安装要求、工作条件、标样选择、基本操作过程、各种修正处理方法及最终报告格式。 本标准适用于波长分光谱仪的电子探针分析仪对样品中各元素组成定量分析测量及数据处理过程。
General guide for EPMA quantitative analysis
本标准规定了对光学传递函数测量装置的性能和准确度进行评价的导则,并提出了光学传递函数测量中的主要误差来源、误差的检验方法、误差计算、测量准确度等。 本标准适用于各种光学传递函数测量装置。
Optical transer function-accuracy of measurement
本标准规定了体视显微镜的基本参数、技术要求、试验方法、检验规则及产品标志等. 本标准适用于各种类型的体视显微镜,但不适用于物镜不能更换的而总放大率在40×以下的低倍简易型体视显微镜.
Stereomicroscope
plane phase shift interferometer
Determination of particle size distribution. Single particle light interaction methods. Light scattering airborne particle counter for clean spaces
This European Standard applies to eye-protectors used for protection against accidental exposure to laser radiation as defined in EN 60825-1:2007 in the spectral range 180 nm (0,18 µm) to 1000 µm. It defines the requirements, test methods and marking. A guide is given in the informative Annex B for the selection and use of laser eye-protectors and filters in appliances. This European Standard does not apply to protectors for intentional exposure to laser radiation. EN 208 applies to laser adjustment eye-protectors. Before selecting eye protection according to this European Standard, a risk assessment should first be undertaken.
Personal eye-protection equipment - Filters and eye-protectors against laser radiation (laser eye-protectors)
Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification
本标准规定了挖泥船泥泵的结构、勘验、修理、检验和交付文件。 本标准适用于挖泥船泥泵的修理,其他类型泥泵的修理可参照使用。
Technical specifications for repairing of dredge pump
Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method (ISO 16592:2012)
Ophthalmic optics - Spectacle frames - Measuring system and terminology (ISO 8624:2011/Amd 1:2015)
Optics and optical instruments. Laser and laser-related equipment. Test method for absorptance of optical laser components
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号