GB/T 14048.18-2016
Low-voltage switchgear and controlgear.Part 7-3:Ancillary equipment.Safety requirements for fuse terminal blocks (English Version)
- Standard No.
- GB/T 14048.18-2016
- Language
- Chinese, Available in English version
- Release Date
- 2016
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
- GB/T 14048.18-2016
- Replace
- GB/T 14048.18-2008
- Scope
- This part of GB 14048 applies to fuse terminal blocks with threaded and non-threaded clamps connected to hard copper wires (single core wire or multi-strand wire) or soft copper wires. The fuse terminal block carries or uses tubular fuses described in IEC 60127-2:2003. It is mainly used in industrial or similar circuits with AC not exceeding 1000 V, frequency up to 1000 Hz or DC not exceeding 1500 V, with a maximum short-circuit breaking capacity of 1500 A. The fuse terminal block is installed in the electrical equipment with the enclosure. The housing should enclose the terminal block in such a way that it is only accessible with the aid of a tool. In some occasions, such as in control circuits, the fuse terminal block can be designed specifically for short-circuit protection. The purpose of this part is to formulate detailed safety requirements and test methods for mechanical, electrical and thermal performance for fuse terminal blocks to ensure compatibility between terminal blocks and standardized fuses. The following products can use this part as a guideline: - Fuse terminal blocks that require special devices on the wires, such as: quick-connect terminals or wrap-around connections, etc.; Terminal block for fuses in direct contact with conductors. For example: connection of insulation movement, etc. When referring to IEC 60947-1:2007, the term "clamping member" in this part replaces "terminal".
GB/T 14048.18-2016 Referenced Document
- GB 14048.1-2012 Low-voltage switchgear and controlgear.Part 1:General rules
- GB 9364.2-1997 Miniature fuses. Part 2: Cartridge fuse-links
- GB/T 11026.1-2003 Electrical insulating materials-Properties of thermal endurance-Part 1:Ageing procedures and evaluation of test results
- GB/T 14048.7-2016 Low-voltage switchgear and controlgear.Part 7-1:Ancillary equipment.Terminal blocks for copper conductors
- GB/T 321-2005 Preferred numbers-Series of preferred numbers
- GB/T 5169.5-2008 Fire hazard testing for electric and electronic products.Part 5:Test flames.Needle test method.Apparatus,confirmatory arrangement and guidance
- GB/T 9364.1-2015 Miniature fuses.Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links
- ISO 4046-4:2002 Paper, board, pulps and related terms - Vocabulary - Part 4: Paper and board grades and converted products
GB/T 14048.18-2016 history
- 2016 GB/T 14048.18-2016 Low-voltage switchgear and controlgear.Part 7-3:Ancillary equipment.Safety requirements for fuse terminal blocks
- 2008 GB/T 14048.18-2008 Low-voltage switchgear and controlgear.Part 7-3:Ancillary equipment.Safety requirements for fuse terminal blocks
GB/T 14048.18-2016 -All Parts
GB/T 14048.1-2023 Low voltage switchgear and controlgear Part 1: General principles
GB/T 14048.10-2016 Low-voltage switchgear and controlgear—Part 5-2: Control circuit devices and switching elements—Proximity switches
GB/T 14048.11-2016 Low-voltage switchgear and control gear.Part 6-1:Multiple function equipment.Transfer switching equipment
GB/T 14048.12-2016 Low-voltage switchgear and controlgear Part 4-3: Contactors and motor starters for AC semiconductor controllers and contactors for non-motor loads
GB/T 14048.13-2017 Low-voltage switchgear and controlgear—Part 5-3: Control circuit devices and switching elements—Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
GB/T 14048.14-2019 Low-voltage switchgear and controlgear—Part 5-5: Control circuit devices and switching elements—Electrical emergency stop device with mechanical latching function
GB/T 14048.15-2006 Low-voltage switchgear and controlgear Part 5-3: Control circuit devices and switching elements DC interface for proximity sensors and switching amplifiers (NAMUR)
GB/T 14048.16-2016 Low-voltage switchgear and controlgear - Part 8: Built-in thermal protection (PTC) control units for rotating electrical machines
GB/T 14048.17-2008 Low-voltage switchgear and controlgear.Part 5-4:Control circuit devices and switching elements.Method of assessing the performance of low-formance of low-energy contacts.Special tests
GB/T 14048.18-2016 Low-voltage switchgear and controlgear.Part 7-3:Ancillary equipment.Safety requirements for fuse terminal blocks
GB/T 14048.19-2013 Low-voltage switchgear and controlgear.Part 5-7: Control circuit devices and switching elements.Requirements for proximity devices with analogue output
GB/T 14048.2-2020 Low-voltage switchgear and controlgear—Part 2: Circuit-breakers
GB/T 14048.20-2013 Low-voltage switchgear and controlgear.Part 5-8:Control circuit devices and switching elements.Three-position enabling switches
GB/T 14048.21-2013 Low-voltage switchgear and controlgear.Part 5-9: Control circuit devices and switching elements.Flow rate switches
GB/T 14048.22-2022 Low-voltage switchgear and controlgear—Part 7-4: Ancillary equipment—PCB terminal blocks for copper conductors
GB/T 14048.23-2022 Low-voltage switchgear and controlgear—Part 9-1: Active arc-fault mitigation systems—Arc quenching devices
GB/T 14048.3-2017 Low-voltage switchgear and controlgear—Part3: Switches，disconnectors，switch-disconnectors and fuse-combination units
GB/T 14048.4-2020 Low-voltage switchgear and controlgear—Part 4-1: Contactors and motor-starters—Electromechanical contactors and motor-starters (Including motor protector)
GB/T 14048.5-2017 Low-voltage switchgear and controlgear—Part 5-1: Control circuit devices and switching element—Electromechanical control circuit devices
GB/T 14048.6-2016 Low-voltage switchgear and controlgear—Part 4-2: Contactors and motor-starters—AC semiconductor motor controllers and starters (including soft-starters)
GB/T 14048.7-2016 Low-voltage switchgear and controlgear.Part 7-1:Ancillary equipment.Terminal blocks for copper conductors
GB/T 14048.8-2016 Low-voltage switchgear and controlgear.Part 7-2:Ancillary equipment.Protective conductor terminal blocks for copper conductors
GB/T 14048.9-2008 Low-voltage switchgear and controlgear - Section 6-2: Multiple function equipment control and protective switching devices (or equipment) (CPS)