This document establishes a system of designation for polystyrene thermoplastic material, which can be used as the basis for specifications. The types of polystyrene plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties: a) Vicat softening temperature, and b) melt mass-flow rate. and on information about the intended application and/or method of processing, important properties, additives and colorants, fillers and reinforcing materials. This document is applicable to all amorphous polystyrene homopolymers. It applies to materials ready for normal use, unmodified or modified by colorants, additives, fillers, etc. This document does not apply to expanded polystyrene, styrene copolymers, homopolymers of substituted styrene or those modified with other polymers such as elastomers. It is not intended to imply that materials having the same designation give necessarily the same performance. This document does not provide engineering data, performance data or data on processing conditions which might be required to specify a material for a particular application and/or method of processing. If such additional properties are required, they are determined in accordance with the test methods specified in ISO 24022-2, if suitable. In order to specify a thermoplastic material for a particular application or to ensure reproducible processing, additional requirements can be given in data block 5 (see 4.6).
EN ISO 24022-1:2020由欧洲标准化委员会 IX-CEN 发布于 2020-09-16,并于 2020-12-31 实施,于 2021-03-31 废止。
EN ISO 24022-1:2020在国际标准分类中归属于: 83.080.20 热塑性塑料。
非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN ISO 24022-1:2020 前三页,或者稍后再访问。
点击下载后,生成下载文件时间比较长,请耐心等待......
文中,研究人员报道了通过二氧杂硼烷的复分解反应,利用不同聚合物如聚甲基丙烯酸甲酯、聚苯乙烯和高密度聚乙烯等聚合物制备Vitrimers,并且发现其反应快速。尽管Vitrimers已经永久性交联但仍可以通过挤出或注射成型反复加工。它们具有优异的耐化学性和尺寸稳定性,可以有效地组装。该方法适用于由碳-碳单键构成骨架的聚合物。...
ISO 2818-1994 塑料.试样的机加工制备 BS ISO 10724-1-1998 塑料.热固粉末模塑复合物试样的注射模塑成型.第1部分:多用途试样的一般原理和模塑成型 3、试样类型:矩形带缺口和不带缺口 4、适用于试验应用的典型测试设备: 文章链接:仪器设备网 https://www.instrumentsinfo.com/technology/show-1312...
产品质量检验聚2 , 6-二甲基苯醚( PPO)与PS , ABS等共混形成一种性能优良的工程塑料(MPPO),从GPC测定发现其冲击强度与PPO 的低分子量含量有关。因此,通过测量GPC ,即可检验产品的质量。...
珠海市远康企业有限公司、上海金发科技新材料有限公司成都 13ISO/TC61/SC9ISO 21305-2:2019 塑料-聚碳酸酯(PC)模塑和挤出材料-第2部分: 试样制备和性能测定Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号